Antelope Zen Go Mic Set

Bundle offer comprising

Antelope Edge Solo

  • Large Diaphragm Condenser Microphone
  • Includes Edge Real-Time Modelling software for classic studio microphone emulation
  • Can be used with any microphone pre-amplifier and audio interface of your choice - for optimal results in terms of your sound, we recommend the Antelope Audio Interface with FPGA Real-Time Modeling
  • Polar pattern: Super-cardioid
  • Low-vibration housing
  • Low-noise and low-distortion circuit design
  • Requires +48V phantom power
  • Frequency response: 20 - 20000 Hz
  • Sensitivity: -35dB / 18mV/Pa (-1 to +3dB)
  • THD+N: 116 dB
  • Inherent-noise: 19dB(A)
  • Signal-to-noise ratio: 75 dB (A)
  • Output impedance: 50 Ohm @ 1kHz
  • XLR connection
  • Dimensions: 134 x 52 mm
  • Weight: 320 g
  • Incl. microphone case and tripod holder

Note: The software requires iLok USB Copy Protection Connector (article no.

401447 - not included) when operating without the Antelope Audio Interface.

Included microphone emulations:

  • Berlin 47 FT
  • Berlin 49T
  • Berlin 57
  • Berlin 87
  • Berlin 67
  • Berlin M103
  • Vienna 12
  • Vienna 414
  • Tokyo 800T
  • Berlin V563 cardioid capsule
  • Illinois 57
  • Illinois 7B
  • Minnesota 20
  • Vienna 112
  • Berlin K86
  • Berlin 47 TU
  • Berlin M251
  • Hamburg 441
  • The scope of the emulations is constantly being expanded

System requirements:

  • Min. Core 2 Duo CPU
  • Min. 4 GB RAM required
  • From OS X 11, Win10

Antelope Zen Go Synergy Core

  • 4x 8 USB-C Interfaces with Synergy Core FX Processing Platform
  • AD/DA conversion with up to 127 dB headroom
  • 2 Microphone-/Line-/Hi-Z inputs via XLR combo jacks
  • Discrete ultra-linear preamps with 65 dB gain and 48 V phantom power
  • Digitally expandable via S/PDIF interface
  • 1 Stereo monitor output via jack
  • 1 Stereo monitor output via RCA (mirrored)
  • 2 Stereo headphone outputs with separate volume control
  • Secondary USB-C port for reverse charging
  • Recording, mixing and playback with up to 24 bit/192 kHz
  • Proprietary 64-bit Acoustically Focused Clocking (AFC) technology
  • Proprietary Synergy Core onboard platform with DSP and FPGA chips
  • 37 Analog-modelled Synergy Core effects
  • <1 ms Latency for real-time monitoring with Synergy Core effects
  • Volume control and buttons for frequency adjustment and control of the core parameters
  • 1.77" IPS screen on a 2.5" display filter
  • USB-C bus-powered
  • Dimensions (W x D x H): 198 x 117 x 58 mm
  • Weight: 0.7 kg
  • Incluces a quick start guide and a USB-C cable
Available since September 2021
Item number 528189
Sales Unit 1 piece(s)
Recording / Playback Channels 4x8
Number of Mic Inputs 2
Number of Line Inputs 2
Instrument Inputs 2
Number of Line Outs 2
Headphone Outs 2
Phantom power Yes
Number of S/PDIF Connectors 1
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Ethernet 0
Other Connectors No
MIDI interface No
Word Clock No
Max. sample rate (kHz) 192 kHz
Max. resolution in bit 24 bit
USB Bus-Powered Yes
Incl. power supply No
USB Version 2.0
Width in mm 198 mm
Depth in mm 117 mm
Height in mm 58 mm
Connection Format USB port Type C
Included in delivery USB-C Cable
Zero latency monitoring 1
Show more
$899
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1