Behringer FX2000 3D FX Processor

367

This item runs exclusively on an operating voltage of 230 V and therefore requires a voltage transformer to run in your country of United States.

3D Effect Processor

  • 71 New algorithms, including real studio-quality stereo and 3D effects
  • Modulation
  • Dynamic, psychoacoustic and EQ algorithms
  • Authentic amplifier emulation, distortion and special effects
  • 11 Effect combinations with selectable serial or parallel configuration
  • Up to 7 adjustable parameters and a 2-band EQ per effect
  • 24-bit A/D and D/A converters with 64x and 128x oversampling, respectively
  • 100 Presets and 100 user memories
  • Comprehensive MIDI implementation
  • Connectors: Balanced XLR and 6.3 mm jacks
  • Weight: 2 kg (shipping weight: 3 kg)
  • Dimensions (HxWxD): 44 x 482.6 x 204.4 mm

Note: comes with EU power supply. 230 V AC / 50 - 60 Hz

Available since July 2010
Item number 249724
Sales Unit 1 piece(s)
19" Rack Unit Yes
Saveable Effects Yes
MIDI-capable Yes
Footswitch connection No
Microphone Input No
$139
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

367 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

177 Reviews

O
Could not be more affordable!
Olby 13.07.2013
1. Introduction

A few years ago I used to rock a Roland MV-8800 production studio. It used to have only 3 effects slots (1x reverb, 2x delay/chorus, 3x multi-fx). When I needed more effects or wanted to do some crazy processing using the multi-fx processor I had to resort to re-sampling. To avoid it I had to find a stand-alone multi-fx processor which would allow me to have more effects without the need to re-sample. As usual I had a hundred in my pocket waiting to get a bang for my buck (or pound :) and this is how I met the Behringer FX 2000 processor.

2. Build Quality

Really sturdy metallic chassis (some of the edges are "razor" sharp so watch out, don't cut your fingers). Plastic knobs feel a bit cheap and wiggly at first but you get used to it and after 2 years I can't complain. Connectors are all of decent quality and fit nicely.

3. Features

You get 100 presets and you can alter them in unimaginable ways and store in another bank of 100 user presets. There are 8 master effects groups (Reverb, Delay, Modulation, Dynamics, Psycho Acoustics, Filter/EQ, Distortion/Amp and Special FX) within these groups you get certain sub-types and even effect combos such as REV+DLY etc. Each effect has 8 tweak-able params (knobs EDIT A through EDIT F + EQ LO, EQ HI). FX bypass push button and compare are nice to quickly skim though and preview the effects. Some effects require MIDI input to set tempo and such. MIDI in/out connectors allow you to recall a preset or to dump them to a PC using the MIDI SysEx. I really enjoyed the ability to recall stored presets using MIDI messages. All you have to do is to record a valid preset change event somewhere at the beginning of your track and the unit will react promptly.

4. Verdict

Lets start with the price. I dare you to find more a affordable multi-fx processor with such a wide selection of effects. Moving on to sound quality. It's acceptable, don't expect too much from reverb as presets sound quite average. The unit is simple in setup and easy to work with, produces nice sound and gives plenty of presets to chose from. For the price, definitely get it, you can't go wrong.
handling
features
quality
sound
7
2
Report

Report

C
Extremely versatile
CyrusVision 08.02.2021
Reverbs, Delays, Chorus, Phaser, Flanger, Vibrato, Tremolo, Pitch Shifter, Auto Panning, Compressor, Expander, Gate, Limiter, De-Esser, Stereo Imager, Filters, Parametric EQ, Graphic EQ, Tube Distortion, Amp Simulation, Speaker Simulation, Sampler, Vocoder and much more
handling
features
quality
sound
6
0
Report

Report

c
So much bang for the buck
crunchyfrog555 27.06.2020
I picked this up on a whim after seeing it going so cheaply and needing a new all-in-one solution for my small home. I was not disappointed.
The build quality is really good for the price. Solid metal, and buttons are OK and should last fine. I found the menus a bit weird at first, but that's something a bit of manual reading easily fixes. The sound is not excellent though. It's good, no problems there. The reverbs are a bit uninspiring and you'd be better served getting a dedicated reverb unit if you have issue with this. But there's tons of features and it does these all pretty damned well for the price. So, buying it for an all-in-one thing is exactly what I wanted. There's some nice little features like being able to trigger the start point of effects, cycles and so on via MIDI.
I mostly use this for noodling on guitar and experimenting before trying to record something (because again, there's better reverb out there), but I predominantly use it for synths, and in that regard it has been serving me VERY well indeed. It's great at tweaking the sound to sit it in the mix fine.
handling
features
quality
sound
2
0
Report

Report

D
Behringer FX2000 3D FX Processor
David3169 10.12.2014
I had been very prejudiced against Behringer but gave in and added this to my equipment, because it is one of their better products and is just very good value for money. The Behringer FX2000 3D FX Processor is partly aimed at the same kind of market as the Alesis MidiVerb 4 and other similar 19 inch effect rack units. But there is more, much more. You will not find psychoacoustic processing elsewhere at anywhere near this price. There's an exciter too and various programs to enhance the stereo image that you won't get on other budget effect units. There are twelve reverb types and the delays include a tape echo simulator and ping pong delay. There's the usual effects like various types of flanger, phaser, chorus and pitch shifting. There are a number of other features like compressor, expander, gate, limiter, ultramizer, de-esser, de-noiser, ultra wide, binauralizer. It has guitar amp simulation, speaker simulation, and much more, even a centre canceller (for karaoke). Watch out for the razor sharp edges on the rack ears though! As well as the instruction manual which comes in the box, there is a more comprehensive version about the FX2000 which you can download from Behringer's site.
handling
features
quality
sound
2
0
Report

Report

YouTube on this topic