Behringer LINE 2 USB

41

Jack-to-USB adapter with integrated A / D converter

  • Length: 2 m
  • Plug and Play for PC and Mac (no additional driver required)
  • 2 x 6.3 mm jack plug
  • Supported sample rate: 44.1 kHz
Available since August 2016
Item number 392803
Sales Unit 1 piece(s)
Recording / Playback Channels 2x0
Number of Mic Inputs 0
Number of Line Inputs 2
Instrument Inputs 0
Number of Line Outs 0
Headphone Outs 0
Phantom power No
Number of S/PDIF Connectors 0
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Ethernet 0
Other Connectors No
MIDI interface No
Word Clock No
Max. sample rate (kHz) 44,1 kHz
Max. resolution in bit 16 bit
USB Bus-Powered Yes
Incl. power supply No
USB Version 1.1
Connection Format USB Cable Type A (fix)
Included in delivery USB cable
$24.50
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

41 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

25 Reviews

A
LINE to USB cable review Great product
Anonymous 24.03.2017
Purpose:
Transfer of archive casette recordings of great personal value onto PC using digital interface to retain highest quality.didnt have a soundcard with coax SPDIF inputs and wanted a affordable solution for oneoff transfer activity.

Use In practice
Plugged Qtr inch L and R jacks into output from Behringer UB802 port mixer and usb into PC. Audacity software found input without problems. Recorded quality seems good although only tried it briefly and source isn't exactly highest quality but no noticeable distortion on loud sustained passages.

Drivers:
For windows 7 64 bit pro
Plug and play with Windows drivers worked fine. no Third party drivers required.

Pros
Ease of setup. up and working within 5 mins of unpacking
Quaity of manufacture is high with 2 metres of quality cable and usb plug has bright blue led imbedded to confirm active.

Sound Quality seems very good with no obvious extrenious noise or interference.

Cons
Selecting the line2usb input in Audio software preferences resulted in initial mono channel "Mic" input only. Selected other option titled "Windows Direct Sound" as input source and Stero line input achieved.

Summary
Highly recommended particularly as it works with line level output from small domestic mixers rather than just output form instruments.
quality
features
handling
sound
2
0
Report

Report

d
LINE2USB only one channel active & too sensitive
djwim 14.01.2019
I have two issues with this LINE2USB.
1. It appears that only the left channel is active, e.g. Audacity or other such programs records only this channel, although seemingly Audacity records it as 'stereo', with both channels recording the left channel.

2. The Input sensitivity is very high. I connected the LINE2USB to my mixer main out, with normal line levels, but I have to set the level of the LINE2USB in windows to 5..max 10, on a scale of 100.

To me it appears more like a (mono) MIC2USB, but I needed a LINE2USB..
quality
features
handling
sound
2
5
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
G
Günstig und gut, wenn man weiß wie es geht
GospelBass 16.08.2020
Das Behringer "Line 2 USB" ist ein günstiges und sehr kleines Stereo USB Audiointerface. Die Daten kommen sicherlich nicht mit höherwertigen Audiointerfaces mit und die Benutzung ist ein wenig "ungewöhnlich".

Unterstützt werden 2 Kanäle mit 16 bit Auflösung und Sample Rates von 8000, 11025, 16000, 22050, 32000, 44100 und 48000 Hz.

Ich verwende es um den Ausgang eines Analogmischpults (Yamaha MG12/4FX) in OBS für Livestreams zu nutzen.

Verbaut sein dürfte ein Cmedia CM6317A ( in dem zugehörigen Datenblatt angegebenen Werte für Dynamic Range (96dB) und THD+N (~89~96dB) stimmen auch ungefähr mit meinen Messungen mit REW überein. Der Frequenzgang ist sehr flach und das Rauschen ist stärker als z.B. bei einem Focusrite Scarlett oder einem Behringer UMC20x. Für viele Einsatzzwecken (z.B. Livestreams) dürfte das aber kaum ins Gewicht fallen.

Ein paar Dinge sind am Behringer "Line 2 USB" ungewöhnlich, wenn man diese Punkte kennt und damit umgehen kann ist das "Line 2 USB" ein sehr gut nutzbares Audiointerface. Leider ist die Behringer Beschreibung für das "Line 2 USB" vollkommen nutzlos. Nachfolgend am Beispiel Windows 10 (englische Oberfläche) beschrieben:

Das "Line 2 USB" wird als "Microphone" angezeigt und erscheint sehr empfindlich (z.B. starke Übersteuerung bei Anschluss an ein Mischpult).

Wenn man in den Windows 10 "Settings" in die "Sound Settings" geht findet man unter "Input" ein Gerät "Microphone (USB PnP Audio Device)". Nach Auswahl von "Device Properties" kann man den Text "Microphone" z.B. durch "Line 2 USB" ersetzen.

Mit "Volume" kann man die Verstärkung einstellen. Meinen Messungen nach gibt es folgende Korrelation zwischen Volume und dem maximalen Eingangspegel (0dBFS): 0 = 26dBu, 8 = 22dBu, 20 = 16dBu, 34 = 11dBu, 50 = 4dBu, 67 = -4dBu, 100 = -35dBu. Wenn man das "Line 2 USB" an ein normales Mischpult anschließen will (Standardausgang 4dBu, max. 16-22dBu) sollte man das Volume im Bereich 8 bis maximal 20 einstellen.

Je nach Anwendung wird nur ein Kanal angezeigt, dieses läßt sich aber einfach ändern: In den "Device properties" (siehe oben) auf "Additional device properties" klicken, im folgenden Fenster kann man im Reiter "Advanced" das "Default Format" auswählen, also z.B. "2 channel, 16 bit, 48000 Hz (DVD Quality)".

Im Reiter "Levels" wird noch einmal das "Volume" angezeigt, mit der rechten Maustaste kann man zwischen "Percentage" und "Decibels" umschalten. Achtung: Eigentlich muss man die angezeigten dB mit 2 multiplizieren (siehe Datenblatt CM6317A).
quality
features
handling
sound
20
1
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
N
interface simple à petit prix
Nexxxus 31.01.2022
Je cherchais un produit pour pouvoir enregistrer le son de mon Modal Skulpt SE et l'intégrer à mes compositions.
Au regard du prix c'est clairement un bon investissement.
Il suffit de brancher sur l'ordi... un adaptateur pour les connecteurs dans mon cas car juste une sortie stéréo sur le Skulpt... et voilà !
Le son est sans défaut, restitué tel qu'il doit l'être.
Il est important cependant de bien régler le volume dans les paramètres son (sous Windows dans mon cas). Pas plus de 50 pour éviter la saturation.
Mais cette interface est avant tout une entrée ligne et donc peut servir à enregistrer n'importe quelle source stéréo (ou mono / double mono) : une platine vynile, etc...

Donc oui je recommande ce produit sans hésitation. D'une fabrication sans défaut, il est conforme et gère le 48 kHz aussi !
quality
features
handling
sound
1
0
Report

Report