Behringer PB1000 Pedalboard

Practical Effect Board

  • For up to 12 effects
  • In robust plastic case with padded lid
  • Incl. 1.7 A power supply
  • Incl. all patch cables and electrical connector cables
  • Interior dimensions: 63 x 35 x 6 cm
  • Pedals not included

Further Information

Number Of Effects 12
Incl. power supply Yes
Effect Send/Return No
Incl. Gigbag No
Incl. Case Yes
149 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.1 / 5.0
  • handling
  • quality
77 written ratings Read all reviews
Great item, superb possibilities
Considering similar alternatives in the market, my opinion is that PB1000 pedalboard is by far the best choice.

- The construction is quite nice and strong.

- Extended room until 12 BOSS or Behringer effect pedal types.

- Two layers of foam (12 pieces), being 6 pieces immediately adaptable for the above mentioned pedal types. The other 6 pieces are full foam pieces but with a pre-cut for the same pedal types. It means we can use them to make personalised molds for any other pedal type.

- It comes with all the cabling that we'll need for almost rig setups (the cables are not the best ones in the market, but they will do the job).

- Perfect connections, not adding any extra noise. Even the power supply does not add noise, as some web reviews says. I did compare by using the original power supply and the Boss/Roland PSA230S. Both were similar, not inducing any extra noise.

- Having two independent Outputs, it permits twice more possibilities for your rig setup.

My current rig setup is composed by Digitech Whammy V5, Vox Big Bad Wah, Boss CS-3+NS-2+FB-2+MT-2, Boss FS-6 switch. All those inside PB1000, and I still have extra room for a tuner and for one more Boss pedal, in horizontal position.

Then I have an external multi-effect board, running all modulation effects and interacting with PB1000 (once again, it is great to have two independent outputs).

So, if you want a standard pedalboard box with a lot of possibilities to make a personalised rig setup, Behringer PB1000 is the right and the best choice for you.

I'm pretty happy with mine and I fully recommend it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Excellent value for the price
Mr. Napalm, 17.10.2009
In english, again. Sorry for that.
A larger copy of the Boss pedalboard. Perfect for housing all your pedals. Comes with all the cables you need, but you already know that. The patch cables are not that great, but hey - this thing costs under 100 EUR!
The power supply unit is great, but the actual way of delivering the power to the pedals could have been more elaborately resolved. One long daisy-chain cable. I do get some hum from the board, but it probably is because of the old electricity lines in my house. Tested with proper grounding, and it did good.
That said, the PB1000 is a great value for the money. The foam keeps the pedals all in place very neatly. Foam is easily removable and / or cuttable, can fit larger pedals in there as well. The upper right corner is a perfect place for a tuner, but for larger tuners you'd have to unscrew a metal bar.
The outer casing looks like it can take a beating, but I'll rather not test it :) I guess that this would give sufficient protection also to delicate digital gear, if not thrown out of the window.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$131 €116.81
Plus $33.80 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
Racks & Cases
Racks & Cases
If you take good care of your equipment, your pack it up carefully - and this means getting a proper case!
test results:
* The prices shown exclude VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

Recently Viewed
Mooer GE 300

Multi-Effects Processor Integrated ToneCapture function with 4 modes (Amp / Stomp / Guitar / Cab) to capture the sound of your favourite gear, 108 High quality amp simulations, 43 IR (Impulse Response) speaker cab simulations, Support for additional Impulse...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

Recently Viewed
TC Electronic Polytune 3 Noir

Tuner for Electric Guitar Polyphonic tuner and buffer, Bonafide buffering gets the sound through long cable runs and multiple effects, Polyphonic tuning makes it possible to tune all the strings simultaneously, Fast chromatic tuner with 0.5 cent accuracy, Precise...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

Passive Full-Range Speaker Rated power: 300 watts (RMS), Equipped with: 12" Woofer and 1" driver with 1.5" Mylar diaphragm, Impedance: 8 ohms, Maximum level: 127 dB, Dispertion pattern: 90° x 60°, Input and output: Speaker Twist, Plastic housing, 4...

Recently Viewed
iZotope Neutron 3 Standard Crossgrade

iZotope Neutron 3 Standard Crossgrade (ESD); channelstrip plugin; crossgrade valid for each registered iZotope product (except DDLY, Moebius and all free plugins); Visual Mixer and Relay display the entire sound stage of the mix and allow to control individual tracks;...

Recently Viewed
ADJ Contour

ADJ Contour; LED mirror ball effect; multi-colored beams crisscross back and forth at different speeds similar to a classic "fan style" effect; 36 lenses that project multi-colored beams of light from 27x 1.5W RGB LEDs; 15 built-in lightshows; controlled by...

Recently Viewed
Magma DJ Controller Case Prime 4

Magma DJ Controller Case Prime 4, flight case suitable for Denon Prime 4, Heavy duty construction of 9 mm vinyl laminated plywood, Solid aluminum profiles and spring loaded latches, Secure stacking due to stackable ball corners, Full padded interior keeps...

Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

Recently Viewed
Fender CLSC SRS Mustang/Duo Case

Guitar Case Hardshell case for Fender Mustang/Duo Sonic models, Lining on the inside: Red plush, Vinyl wrapped steel core carry handle, Large storage compartment with lid, Steel draw latches, 1 Locking latch with key set, Internal dimensions: 100.33 cm...

Recently Viewed
iZotope Music Production Suite 2.1 CG2

iZotope Music Production Suite 2.1 Crossgrade 2 (ESD); plug-in bundle; crossgrade from iZotope Music Production Suite 2 or RX Post Production Suite 3 to Music Production Suite 2.1; extensive collection of software tools for music production, mixing and mastering; contains...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.