Blackmagic Design Video Assist 7" 3G

7

Portable Video Monitor

  • With dual SD card recorder
  • Scope display and viewfinder in one
  • With higher quality recording codecs on board
  • Adds a larger screen, four integrated scopes, enhanced focus assist, tally indicator and 3D LUTs to any SDI or HDMI camera
  • Supports formats up to 1080p/60
  • Built-in mono speaker
  • Screen dimensions: 7 inches with 1920 x 1200 pixels
  • Screen brightness: 310 nits
  • Remote control: 1 x 2.5 mm LANC socket for recording start/stop
  • Memory type: SDXC UHS-I and SDHC UHS-I SD cards
  • Supports the following SD cards: DS, HS, SDR12, SDR25, DDR50 and SDR104
  • SDI compliance: SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
  • SDI metadata support: HD RP188
  • Audio sampling frequency: Standard television sampling frequency of 48 kHz and 24 bit
  • Video sampling frequency: 4:2:2 YUV
  • Colour accuracy: 10 bit
  • Colour space: REC 601, REC 709
  • Multi rate support: SDI and HDMI switch between 270 Mbps, 1.5 Gbps and 3 Gbps
  • HDMI video standards/SD video standards: 525i/59.94 NTSC, 625i/50 PAL
  • HD video standards: 720p/50, 720p/59.94, 720p/60 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080p/50, 1080p/59.94, 1080p/60 1080i/50, 1080i/59.94, 1080i/60
  • HDMI colour accuracy: 10 bit
  • Supported codecs: ProRes 422 HQ / ProRes 422 / ProRes 422 LT / ProRes 422 Proxy / DNxHD 220x / DNxHD 145 / DNxHD 45 / DNxHD 220x MXF / DNxHD 145 MXF / DNxHD 45 MXF
  • Scopes: waveform, RGB parade, vectorscope, histogram
  • Display modes: Scopes with picture-in-picture or as faded-in overlay with adjustable opacity
  • Power supply: 1 external 12 V power supply unit with adapters
  • Suitable for all countries (included)
  • Operates with Sony-compatible NP-F batteries (batteries not included)
  • Dimensions (W x H x D): 193 x 130.5 x 37 mm
  • Weight: 0.825 kg

Connections:

  • 1 x SDI video input
  • 1 x SDI video output
  • SDI rates: 270 Mbit, 1.5G, 3G
  • 1 x HDMI video input
  • 1 x HDMI video output
  • Analogue audio inputs: 2 balanced mini-XLR inputs with phantom power
  • Analogue audio outputs: 1 x 3.5 mm headphone jack
  • SDI audio inputs: 16 channels embedded in SDI
  • SDI audio outputs: 16 channels embedded in SDI
  • HDMI audio inputs: 8 channels embedded in HDMI
  • HDMI audio outputs: 8 channels embedded in HDMI
  • SD interface: dual SD slots for UHS-I cards
  • Computer interface: 1 USB-C port for initial setup, software updates and software control via Video Assist Utility Blackmagic Video Assist '' 3G
Design Field Recorder
Recorder Yes
Screen size [Inches] 7"
Screen resolution 1920 x 1200
Recording resolution 1080p
Record tracks 1
HDMI input Yes
SDI input Yes
HDMI Output Yes
SDI Output Yes
Streaming Function Yes
Battery Optional
Storage type SD Card
Audio IN Yes
Audio Monitor Yes
Loudspeaker Yes
Scopes Yes
Tally Yes
Recording mount 1/4 "internal thread
available since October 2020
Item number 503767
sales unit 1 piece(s)
$649
The shipping costs are calculated on the checkout page.
In stock
In stock

This item is in stock and can be dispatched immediately.

Standard Delivery Times
1
g
Great field recorder with waveform
gmas 22.03.2021
at first there was a green shift on the screen but the firmware update fixed this problem.
Great field recorder, solid and strong, easy to use with 2 Sony batteries.
picture/sound
quality
0
0
Report

Report

google translate dk
Unfortunately there was an error. Please try again later.
J(
Perfect for your home studio
Jan (S2D.dk) 12.03.2021
After using the monitor for some weeks with my Blackmagic design ATEM mini Pro ISO I am super happy. The USB-C port can be used as webcam for my Microsoft Teams calls. Solving the problem for my ATEM mini Pro ISO where I need the USB-C for recording to SSD. The HDMI and SDI can be used at the same time, I can then send the "program" from the ATEM mini Pro ISO to my big monitor plus to a monitor next door over SDI. The SDI input is used to connect my UltraStudio Monitor 3G from my Mac mini M1. in this way, the Monitor can be used for several different purposes at the same time. The Monitor have a Fan but make almost no noise. I also have the 12G version of the Monitor and that make more Noise. If you don't need the 12G SDI (4K Support) I can only recommend the 3G and save some money... Note: I have only used the Monitor indoor so no comment to the brightness if you need to used it outdoor.
picture/sound
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
A
gewohnte Qualität
Alain.k.w 10.06.2021
Bevor ich mir den Video Assist 7" 3G zugelegt habe besaß ich den Vorgänger. Damit habe ich die Präsentationen der Sprecher*innen auf Konferenzen aufgezeichnet. Das Gerät wird zwar ultra heiß aber die Qualität ist super. Jetzt bei Hybrid Veranstaltungen mit Anwesenheit vor Ort und Digital via Stream kann der Video Assist seit dem letzten Update als Videocam verwendet werden. Somit kann das Videosignal vom Sprecherrechner mit den Slides direkt in OBS zum streamen eingespeist werden und gleichzeitig wird das Signal durchgeschleift zum Beamer. Einfach großartig und das zu einem wesentlich günstigeren Preis als sein Vorgänger. Der vier Jahre problemlos durchgehalten und fast die Hälfte des Einkaufspreises wieder eingespielt hat.
picture/sound
quality
0
0
Report

Report

google translate dk
Unfortunately there was an error. Please try again later.
T
Super robust og brugervenlig
TriXxieDK 17.07.2021
Skærmen giver masser af muligheder, og er helt sikkert en god investering. Jeg har god erfaring med at bruge Manfrottos Micro Friction Arm til den (varenummer 464912). Den er kanon til at have en director of photography til at kunne følge optagelsen live, og giver gode muligheder for instant playback efter en scene er optaget.
picture/sound
quality
0
0
Report

Report

YouTube on this topic