Doepfer A-100MC Raw

Mini-Case raw

  • With external power adapter
  • Empty case
  • Suited for up to 4 A-100 modules
  • Usable width 32 HP (e.g. four modules with 8HP)
  • External dimensions (W x H x D): approx. 180 x 155 x 125 mm

Further Information

System Eurorack
Width 32 TE / HP
Hight 3 U
Power Supply Yes
Formfactor Case
43 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • features
  • quality
Total
lovely tiny box
derkatsh, 13.02.2018
(it makes no sense, I had to give stars to "sound"... whatever).

I own 4 of these boxes as my modules are tiny and I don't always need them all. 2 of these boxes fit perfectly in hand luggage on all cheap flights in EU. The only disadvantage is they only have 4 slots... This can be expanded though.
Also watch out as there are 2 models, 9V and 15V, do not mess the power suppies!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Case is sturdy - but some problems
KitSebastian, 10.01.2018
The build quality of the box is very sturdy and i can imagine touring with it. Very impressed. Screw system very easy and sleek. The finish is nice as well.

However, be careful when plugging in the power 9v cable. Perhaps leave it plugged it in if you're not moving it. As slowly the power connector is moving away from the board.

Also, people hoping to use the Doepfer Spring reverb unit in this case: it is possible, and I use it as my main source of studio reverb, however you will encounter static/noise. Doepfer recommends buying a two tiered case so the reverb unit is not on the same level as the power.

Other than that, a great purchase, aesthetically beautiful and will make your grey paneled modular synthesizer look a touch more organic.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Great
Ian3185, 03.07.2014
Great starter eurorack case - 32 HP and 4 power connectors. With careful selection you can fit a decent synth inside. Quality is very good. Looks fine in the raw but is also ready for varnish/wax/paint etc.. whatever your choice. I have three now as I am limited for space. Very portable and stackable, you can fit them in anywhere. Comes with an European power pack so you just need an adaptor (just a couple of quid from the supermarket). The power connects in through the side. I was a little worried that this could get knocked or break, but seems sturdy enough so far. Like very much. And its relatively cheap.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Loose input power connection
Lewis N., 28.12.2013
The power input connection into the back of the box is inadequately supported, so it wobbles and the electric input is lost. I am currently using an elastic band to stabilise it in place

The box itself performs well. Pity about the input connection.

Service and delivery very good
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-100MC Raw
(43)
Doepfer A-100MC Raw

Mini-Case raw With external power adapter, Empty case, Suited for up to 4 A-100 modules, Usable width 32 HP (e.g. four modules with 8HP), External dimensions (W x H x D): approx. 180 x 155 x 125 mm

Doepfer A-100 PMS 12 PSU3
(8)
Doepfer A-100 PMS 12 PSU3

Monster Single Compartment Suitcase 168HP / 12U 230 (4 x A-100PSU3)

Doepfer A-100LC9 PSU3 Low Cost Case
(28)
Doepfer A-100LC9 PSU3 Low Cost Case

Case for A-100 module 9U with three module rows, External dimensions (W x H x D): Approx. 445 x 420 x 160 mm, Internal dimensions (W x H x D): 3 x 84 HP x 3 U, Usable depth for A-100 modules: About...

Doepfer A-100LC3 Low Cost Case
(43)
Doepfer A-100LC3 Low Cost Case

Case for Modules A number with 84 HP for installation of modules, Incl. external power supply (1200 mA) and bus board, Dimensions (W x H x D): approx. 445 x 150 x 160 mm

Doepfer A-100PMB Monster Base PSU3
(13)
Doepfer A-100PMB Monster Base PSU3

Monster Case Substructure 168HP / 6U 230V, With 2 x PSU3 power supply (+ 12V / 2000mA, -12V / 1200mA, 100 - 230V), Removable lid with carrying handle, 4 Backplanes installed, Optional modules,...

Doepfer A-100P9 Case PSU3
(34)
Doepfer A-100P9 Case PSU3

Base frame in the case Three rows with 84 HP each for the installation of modules, 3x 3 H3, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx....

Doepfer A-100PB PSU3
(6)
Doepfer A-100PB PSU3

Substructure housing for modules 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth...

Doepfer A-100 LC6 Case 6HE PSU3
(20)
Doepfer A-100 LC6 Case 6HE PSU3

Original Doepfer case Untreated (no paint and/or lacquer) body constructed from "raw" wood, External dimensions: approx. 445 x 275 x 160 mm, Interior dimensions: approx. 2x 84 HP x 3 U, Usable...

Doepfer A-100LC6v Low Cost Case VE
(9)
Doepfer A-100LC6v Low Cost Case VE

Empty Housing for Receiving Eurorack Modules Vintage Edition, Size: 6 RU (2x 3RU), Two rows of 84TE each for the installation of modules, Dimensions (W x H x D): approx. 445 x 275 x 160 mm, Usable...

Doepfer A-100P6 Case PSU3
(10)
Doepfer A-100P6 Case PSU3

Case with base frame Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower ...

Doepfer A-100LCB PSU3
(10)
Doepfer A-100LCB PSU3

Low cost base With PSU3 power supply (+ 12V / 2000 mA, -12V / 1200 mA, +5V / 4000 mA, 100 - 230 V), Two module rows, 2x 3 U / 84 HP, Ideal as a base for the A-100LC6 / LC9 or as stand-alone...

Doepfer A-100 LC1 Low Cost Case
(16)
Doepfer A-100 LC1 Low Cost Case

Case for Eurorack Modules Integrated power supply A-100SSB: +12 V / 380 mA, -12 V / 380 mA, A-100LC3 version reduced to 48 HP, Built-in bus board with 8 module slots, Housing made of raw wood -...

$101
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.
(2)
Recently Viewed
Roland FP-30X BK

Roland FP-30X BK; Digital Piano; 88 keys PHA-4 keybed with Ivory Feel; Sound engine: 12 SuperNATURAL Piano tones, 20 E-Piano tones and 24 other tones; max. polyphony: 256 voices; Bluetooth Audio (V3.0) and Bluetooth MIDI (V4.0); build-in speaker system (two...

Recently Viewed
Audient iD14 MKII

USB-C Audio Interface 24 bit / 44.1 - 96 kHz, ADC dynamic range: 121 dB, DAC dynamic range: 126 dB, 2 x Audient Class A console microphone preamps, 2 Combined mic / line inputs: XLR / jack combination socket,...

Recently Viewed
Roadworx Microphone Arm

Roadworx Microphone Arm, microphone desk arm with cable management, cables with a diameter of up to 8mm can be attached to the underside of the arms with a clip system, aluminum construction, locking central hinge, 3/8 "thread connector with 5/8"...

(1)
Recently Viewed
Kali Audio IN-5

Kali Audio IN-5; Active near field monitor; 3 way system with coaxial midrange/tweeter; 5" woofer; 4" midrange; 1" soft dome tweeter; power: 160Watt (80/40/40Watt Tri-Amped); frequency range: 39Hz - 25kHz; max. SPL: 112dB; EQ for adjustment to the location; connectors:...

(5)
Recently Viewed
iZotope Tonal Balance Bundle CG 2

Plug-in Bundle Crossgrade from any paid-for iZotope-/Exponential audio product to Tonal Balance Bundle, Professional software tools for producing, mixing and mastering, Supported formats (64-bit): VST 2/VST3/AU/AAXnative/NCP, System requirements: Windows 7 (64-bit), Mac OSX 10.11.6 - 10.14.4, paid-for and registered...

(1)
Recently Viewed
Zoom Am7

Zoom Am7, mid-side stereo microphone for Andriod devices; USB type C connection; 90º / 120º / M-S mode switchable; max. SPL: 120dB; resolution: 44.1kHz / 16Bit, 48kHz / 16Bit; for creating videos, podcasts, vlogs and more; two modes: audio and...

Recently Viewed
Electro Harmonix Nano Metal Muff Distortion

Electro Harmonix Nano Metal Muff Distortion; Effects Pedal; Intense, aggressive sound especially for modern Metal Styles; the 3-Band EQ offers a wide tonal range; The Noise Gate eliminates unwanted Noise when you stop playing; compact Footprint; Controls: Vol, Gate, Dist,...

(1)
Recently Viewed
Rode VXLR Pro

Rode VXLR Pro; Plug adaptor with transformer and power converter; TRS mini jack (3.5mm) to XLR3M; integrated voltage converter from phantom power (12 - 48V) to plug-in power (4V); for connecting VideoMic, VideoMic GO, VideoMicro, VideoMic Pro, VideoMic Pro+, VideoMic...

Recently Viewed
Decksaver Pioneer DJ DJM-S11

Decksaver Pioneer DJ DJM-S11 - for Pioneer DJ DJM-S11; Protects against dust, dirt, liquids and shocks; Milky transparent surface; High quality; Made of polycarbonate; Dimensions (LxWxH): 27,20 x 43,00 x 3,5 cm, Weight: 0,5 kg

Recently Viewed
Showtec ACT Fresnel 50 WW

Showtec ACT Fresnel 50 WW; DMX controlled Fresnel theater spot complete with barndoor, filter frame and 1.5 m connection cable; 40 W COB LED; Color temperature: 3200 K; Luminous flux: 3400 lm; manual zoom (10 ° - 58 °); manual...

Recently Viewed
Zaor Miza 88 Flex Wengé Grey

Zaor Miza 88 Flex Wengé Grey; studio desk with 19" rack and keyboard tray; offers space for computer monitors (2 x 30"), keyboard, mouse, DAW controller, monitor controller etc.; 2x 4U 19" racks and central drawer; extendable tray, height adjustable...

Recently Viewed
Surfy Industries Surfybear Compact RD

Effects Pedal for Electric Guitar Reverb, Original Accutronics type-8 spring reverb housed in a smaller, pedalboard-friendly aluminium housing, Ideal for surf guitarists, as well as many other styles, 2 Foot-switchable mixer controls, which allow switching between 2 reverb settings,...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.