Doepfer A-175

Dual Voltage Inverter

  • Dual voltage inverter
  • When applied to the input, the voltage is inverted (for example from 5 V to -5 V inversion) and is available at the output
  • Two LEDs are used for voltage control of the output signal (positive / negative)
  • Width: 4 TE / 4 HP / 20.0 mm
  • Depth: 35 mm (measured from the rear of the front panel)
  • Power requirements: 20 mA (12 V) / -10 mA (-12 V)

Further Information

Switch Modul No
CV-Editor/VC-Processor No
Tools Yes
Width 4 TE / HP
11 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • features
  • quality
Total
an indispensable utility
23.10.2016
Seems like a simple little module but I'm surprised how often this ends up in my patches.

Inverts the voltage at the input and outputs the original voltage and the inverted voltage, simple. But think laterally and it's a powerful addition to any system. With a couple of VCAs an LFO's signal can be used to create a panning effect or if you need to invert a clock signal this'll do the trick. I like inverting a sample and hold voltage then routing the two control voltages to two filters.

It's inexpensive, indispensable and you get two inverters in one small module.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Does exactly what it says on the tin
Simon P, 29.07.2013
This is an incredibly useful module. It's not filled with loads of features or anything like that. But what it does it does well and is an invaluable part of my set up.

By looking at the front panel it's not obvious, but if you put a source into the top 'in' and nothing in the second 'in' then you can not only take the inverted out, but a copy of the input source too. So it's also a mult. Bonus.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-175
(11)
Doepfer A-175

Dual Voltage Inverter Dual voltage inverter, When applied to the input, the voltage is inverted (for example from 5 V to -5 V inversion) and is available at the output, Two LEDs are used for...

  • Switch Modul: No
  • Module: Yes
  • CV-Editor/VC-Processor: No
  • Tools: Yes
  • Empty Rack, Or Housing: No
  • Width: 4 TE / HP
  • Basic System: No
  • Accessories: No
Doepfer A-180-2 Multiples
(76)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

  • Width: 2 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-138s Mini Stereo Mixer
(38)
Doepfer A-138s Mini Stereo Mixer

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

  • Modul Type: Stereo
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Width: 8 TE / HP
  • Basic System: No
  • Accessories: No
Doepfer A-124 Wasp Filter SE
(58)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-160-2 Clock Divider II
(17)
Doepfer A-160-2 Clock Divider II

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-3 Dual Buffered Multiple
(29)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-151
(25)
Doepfer A-151

Quad Sequential Switch Module Electronic 4-position rotary switch, Trigger input, Reset input, 4 Inputs, 4 Outputs, Voltages of -8V to + 8V can be processed, Euro rack format, Width 4 HP, Depth: 35...

  • Width: 4 TE / HP
  • Switch Modul: Yes
  • CV-Editor/VC-Processor: No
  • Module: Yes
  • Tools: No
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-9
(9)
Doepfer A-180-9

Multicore Module Ideal for connecting multiple systems or housings, Up to 14 signals can be transmitted via common network cables (RJ45), Width: 2 x 4 HP, Depth: 25 mm, Power requirement: +0 mA...

  • Width: 4 TE / HP
  • Switch Modul: No
  • CV-Editor/VC-Processor: No
  • Tools: Yes
Doepfer A-110-1
(71)
Doepfer A-110-1

Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...

  • Analog: Yes
  • Module: Yes
  • Digital: No
  • Width: 10 TE / HP
  • Empty Rack, Or Housing: No
  • variants: Doepfer
  • Basic System: No
  • Accessories: No
Doepfer A-185-2
(16)
Doepfer A-185-2

Precision Adder / Buffer 4 CV inputs (1x with controller, 3x without controllers), Width: 6 TE / HP, Depth: 50 mm, Power requirement: +10 mA (+12 V) / -10 mA (-12 V)

  • Switch Modul: No
  • Module: Yes
  • CV-Editor/VC-Processor: No
  • Tools: Yes
  • Empty Rack, Or Housing: No
  • Width: 6 TE / HP
  • Basic System: No
  • Accessories: No
Doepfer A-155
(25)
Doepfer A-155

Analog-/ Trigger Sequencer 2 Switch rows with 8 steps each, Eurorack format, Width: 50 HP, Depth: 40 mm, Power requirement: +80 mA (+ 12 V) / -20 mA (-12 V), Optional expander module: Article Nr...

  • Width: 50 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-148 Dual Sample And Hold
(34)
Doepfer A-148 Dual Sample And Hold

Euro Rack Module Dual Sample & Hold, Two separate sample/hold circuits, Euro rack format, Power requirements: +20 mA (+12V) / -20 mA (-12V), Width: 4 HP / 20.0 mm, Depth: 30 mm (measured from the...

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
$48.45 €43.10
The shipping costs are calculated on the checkout page.

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(5)
Recently Viewed
Line6 Pod GO

Line6 Pod GO; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR loading),...

Recently Viewed
Harley Benton Electric Guitar Kit CST-24T

Harley Benton Electric Guitar Kit CST-24T, ST Electric Guitar Kit; Body: Solidwood (wood color may vary) with Binding; Neck: Maple with Binding; Fingerboard: Amaranth; Neck Mount: Bolt On; Inlays: Dots; 24 Frets; Nut Width: 42 mm (1,65"); Scale: 635 mm...

Recently Viewed
Klark Teknik 3rd Dimension BBD-320

Klark Teknik 3rd Dimension BBD-320; Analog Multi-Dimensional Signal Processor with BBD Technology; Legendary analog Spatial Sound Processor; Authentic reproduction of original analog circuitry; Pure analog signal path based for highest signal integrity; sound effects based on authentic BBD (Bucket Brigade...

Recently Viewed
Behringer CP1A

Behringer CP1A; power supply module for Eurorack systems; LED indicators for +12V, -12V and +5V rails; connectors for 2 flying bus boards; power rating: 1A (+12V) / 1A (-12V) / 0.5A (+5V); width: 4 HP; depth: 52mm: including: external power...

Recently Viewed
Sennheiser RR 5000

Sennheiser RR 5000 In-Ear wirelesss headphone - attention! no transmitter included! just for extension of RS5000! srechargeable wireless headphone, three different hearing profiles, up to 70 m range, 125 dB SPL, up to 12 h running time, frequency response: 15...

(72)
Recently Viewed
Presonus AudioBox USB 96 Black

Presonus AudioBox USB 96 Black; 2x2 USB 2.0 Recording-Interface 24-Bit / 96 kHz; Connections: 2x Mic/Instrument Input XLR Combo, 2x Line-Out 6.3 mm TRS Jack balanced, MIDI I/O, Stereo Headphone Out 6.3 mm TRS Jack, USB 2.0 Connection; +48V Phantom...

Recently Viewed
Tascam Model 12 Bag

Tascam Model 12 Bag; carrying bag for Tascam Model 12; padded; external pocket for Accessories; incl. shoulder strap and carrying handle; internal Dimensions: 343 mm × 99 x 360 mm (WxHxD)

Recently Viewed
Seymour Duncan Power Stage 200

Seymour Duncan Power Stage 200, compact pedalboard-mounted power amp, 200 Watts at 4 Ohms, can power cabinets with 4-16 Ohms, suitable for direct amplification of effects pedals, small enough for placement on pedalboards, Cab Sim and EQ switchable for phones...

Recently Viewed
Kala Soprano Ukulele Starter Kit

Kala Soprano Ukulele Starter Kit; KA-15S; satin mahogany ukulele; soprano body size; 13 5/8" (346 mm) scale; 21 1/16" (534 mm) overall length; Mahogany top; Mahogany back and sides; Mahogany neck; 12 frets; Walnut fingerboard; GraphTech NuBone nut and saddle;...

Recently Viewed
Harley Benton PowerPlant PowerBank+

High-end battery power supply for effects pedals Can be used as a power bank not only for effect pedals, but also for most of the multiple power supplies available on the market such as Harley Benton, Strymon, MXR, Palmer,...

Recently Viewed
Nura nuraloop

Nura nuraloop bluetooth in-ear headphone - personalised Sound, 16+ hours wireless battery, Active Noise Cancellation, Social Mode, TouchDial controls, Wireless and wired, aptX HD Bluetooth® 5, Sweat resistant, Voice calls, Automatic on/off, In the box: 1x NuraLoop, 1x analog cable,...

Recently Viewed
Behringer Eurorack Stand 3-Tier

Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669) or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat); variavle width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.