Fender Neck Roasted Maple Strat

25

Stratocaster Neck

  • Made of roasted maple
  • Fingerboard: Roasted maple
  • Neck profile: Flat Oval - thickness at 1st fret: 19.1 mm (0.752") / 12th fret: 21.08 mm (0.830")
  • Fretboard radius: 12"
  • Nut width: 42 mm
  • Pre-slotted synthetic bone nut
  • 22 Jumbo frets
  • Glossy finish on fingerboard and headstock face
  • Satin finish on back of neck
Available since June 2021
Item number 521231
Sales Unit 1 piece(s)
Model ST-Style
Strings (Number) 6
Material Neck Maple
Material Fingerboard Maple
Mensur (in mm) 648 mm
Nut Width (in mm) 42 mm
Frets / Location (Number) 22
Fretless No
Varnished Yes
$289
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

25 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

22 Reviews

DF
A really, really nice neck ! With one caveat.
Dave Francis 25.04.2022
This is a really, really nice MIM neck. With just one thing to watch out for.
I'm building a Partscaster at the moment and wanted something a little different than rosewood or Pau Ferro. Naturally, at such a price, I thought I'd give a roasted maple neck a try.

I don't usually like maple necks as the high gloss finish on the rear of the neck is something I don't enjoy. However, this neck has a wonderful satin finish, sanded perfectly. Really nicely done, the jumbo frets are all perfect, can't complain there. Fit was perfect with an aftermarket body.

One thing I would warn potential buyers of is the fact that this neck comes with an uncut nut. The nut is marked (actually barely marked on the top two strings) and far, far too high. This meant I had to scrabble around trying to find a set of nut files. Nut files aren't cheap, and you only use them a few times, so bear this in mind.

The nut was far too high as well. After some fruitless filing - a lot of fruitless filing - I decided to replace the nut with a Tusq one. Of course, when you replace a nut, if you want a good setup, you still need recourse to a set of nut files.

I'm really, really happy with this neck and can recommend it to anyone, but it's not a drop in replacement (hence one star off) - you'll need to be experienced in cutting nuts, and they're never easy to get right. The rest of the setup went perfectly, you'll need a 3/16" Allen key for the neck relief adjustment as this is an MIM neck and not the usual 1/8" US pattern.

There are some out there who claim that roasted maple is more brittle to work with, and can easily ding or dent: my tuners went on fine and fitting twin string trees presented no problem, in fact, it's really nice to work with.

Highly recommended (with the above caveat) and unbeatable at the price. If you want a high quality, well priced, slightly different neck, you'll be very happy with this one.
quality
11
1
Report

Report

D
Just brilliant
Daniel1901 31.08.2022
A super quality neck, if only Fender put these necks on their complete guitars, the fretwork is top drawer, the finish, flawless, the nut obviously needs cutting and shaping etc, but, absolutely fantastic.
quality
3
0
Report

Report

m
Extremely disappointed
mciksfonjgvrs 20.10.2021
Chip in the neck on the 22nd fret and nut is so poorly cut that strings keep popping out when bending strings. Im not sending it back though, getting a luthier to fix it because the neck is still comfy but wow the nut is badly cut
quality
9
33
Report

Report

J
Very nice neck
Jarvss 17.09.2022
Fabulous 60’s profile neck with medium jumbo frets. Satin neck is nice to play and has given a new lease of life to my neglected 90’s MIM Fender strat.

The only downside was that the nut is not fully cut, just started which seems to be normal on all Fender after market necks. I was on the verge of returning it as I didn’t want to spend a fortune on fret files or luthier costs. After some googling I tried the home made method of creating fret files by cutting notches in some feeler gauges. Does the job very well. Take your time a little bit at a time, it’s not too difficult. Apparently the hardest part of cutting a nut is the starting, which is done for you here.
quality
2
0
Report

Report

YouTube on this topic