Gewa Tablet Holder 7" - 10,1"

72

Universal tablet device holder

  • Suitable for almost all tablet computers with dimensions of 7" up to 10.1"
  • Mounting to a (microphone) stand is via a 5/8" thread or tripod / stand mounting is by means of an enclosed tube clip (10 - 25 mm tube diameter)
  • Infinitely rotatable and inclinable (no fixed increments or steps)
  • All connectors on the device remain freely accessible
Available since March 2017
Item number 409994
Sales Unit 1 piece(s)
Type Mounts
Type Of Keyboard Stand iPad holder
Colour Black
suitable for Universal
Diagonal of 7"
Diagonal up to 10,1"
Fastening Stand clamp
Rotating 1
Show more
$21.90
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

72 Customer ratings

4.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

quality

46 Reviews

J
Good tablet holder
JSze 09.02.2020
The tablet holder clips on to just about any mic stand provided by the various venues I play at, and it's nice and stable so my iPad stays in place. While I would have liked if it could be less bulky when collapsed, I have absolutely no complaints about the functionality of the product. It does what it sets out to do just fine, and I'd get another in the unlikely event that mine fails on me.
handling
stability
quality
1
0
Report

Report

T
Almost great
Timddeb. 12.12.2018
The item does what it says on the packet, however I feel it would be easy to make this much better due to a few design faults. Why? Well the screw thread to attach the holder onto the mike stand is tapped into mild steel of a lot less than the diameter of the thread. The bracket it is tapped through is more than adequate for the job of holding up the tablet, but too thin (around 3 or 4mm) for the more than ocasional use of the screw. A nut welded to the hole would improve this situation enormously, and a mod I am sure I will have to make before relying on this item for gigging. The thread for holding the actual adjustable holder is quite a large diameter, around 15mm so no worries there, although the actual thread is quite fine. Be carefull if you need to reattach it as it will be easy to cross thread it. The rotation of the holder for vertical/horizontal is a friction affair, and I can see a nut hidden away. Once it goes slack I will need to do a partial dismantle to be able to access this, and I hope the head of the screw is captive as the decorative cover over it seems well attached. The tablet needs to be firmly attached to ensure it does not drop out if you turn the orientation to horizontal. SO make sure you clamp it in tight. Overall I feel that a few minor changes could improve this item enormously. I have given four stars for handling and stability, this is a bit of a guess. Out of the box this is great. After a few weeks of use I am pretty certain it is going to be a bit tricky. As many of us use our tablets for more than just displaying music/lyrics these days the wear and tear is going to impact on the stand quite quickly. I am going to use this until I find something better.
0
0
Report

Report

W
The materials are good, the weight / balance? Not so much
Wrench 27.04.2020
Bought this bad boy to fix it to a sheet music stand for the wife to place her iPad in front of the kit. The projection is a bit too far for the small diameter pipe it is meant to be fixed to so balance and stability are not great. The actual make of it is not bad though. Just be aware that you need a very stable stand to keep it from wiggling and tipping over.
0
0
Report

Report

T
Great Product
TimWears 06.06.2017
A high-quality product that holds iPads (and other tablets) securely in place without scratching or damaging them. The clamp that attaches to the microphone stand is very robust, giving a high level of confidence in the product. The tablet can be angled to face any conceivable direction, which is very helpful.

The tablet can be fitted in the holder quickly and easily, but the holder isn't spring loaded - adjustments are manual.
0
0
Report

Report