Neutrik NTP3 RC

319

Mini Jack

  • 3.5 mm Angle - Jack male
  • Stereo
  • With 2-piece housing
  • Screw nozzle
  • Original Neutrik strain relief
  • Suitable for cables from 2.0 to 4.5 mm diameter
  • Nickel housing
  • Nickel contacts
Available since March 2004
Item number 167467
Sales Unit 1 piece(s)
Build In No
Type TRS (stereo/sym.)
angled Yes
Plug Jack 3,5 mm TRS male angled
$3.99
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

319 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

131 Reviews

S
Finally pro quality 3,5mm plug
Slobodan 06.02.2017
This is from my experience one of the very few 3,5mm plugs suitable for pro stage use. I use it for wired IEM and have a full confidence in it's construction.

The quality of the tip is standard from Neutrik, and it has strain relief that actualy does the job. For me this is really important feature for every pro audio cable.

This plug is really small and can be little tricky for soldering, almost impossible if your cable is over 4mm thick - it won't fit the strain relief. Due to that "only" 4 stars overall. But once completed, I believe it's indestructible
quality
1
0
Report

Report

FM
Expected more from Neutrik
Funeral Musician 22.01.2023
I purchased a few of these plugs because I wanted to shorten the cables on some of my headphones. Unfortunately, as I was putting the strain relief on the cut-off cable before soldering, the strain relief tore right at the molding line (please note that the diameter of the headphone cable did not exceed the maximum diameter specified by Neutrik on their website). There was also a large and unsightly molding mark on the strain relief, which could have been easily removed at the factory. I had to use a razor blade to cut it off flush. Finally, even though each metal part of the plug looked very high quality, when I screwed them all together, there were large gaps between them, and the entire assembly rattled when shaken. I had expected a lot more from Neutrik... Curiously, when I looked at the packaging the plugs had come in, on some of them it said “Made in Liechtenstein”, and on others — “Designed in Liechtenstein”. Does it mean that the manufacturing facilities have been moved elsewhere? It might have been a coincidence, but all of the “Made in Liechtenstein” plugs appeared to fit together a bit better than the “Designed in Liechtenstein” ones. I managed to finish the task using one of the better plugs, but I still had to glue it together with instant adhesive to prevent the unsightly gaps between the metal parts. I will not buy these plugs in the future.
quality
0
0
Report

Report

i
Simple and pretty solid
ivoi.iovi 13.10.2021
These are very well designed for very easy soldering. The construction once made is rather hardy and I cannot foresee any issues. The space in the rubber relief is rather narrow so check your cables first, but it is also easy to cut to make clearance for slightly larger cables.
I've used these mostly for MIDI cables to go between guitar pedals and a Mfningstar MIDI box but have also used several for audio and I believe them to be excellent quality.

that's it, not really much to say except that these are a great choice if the size suits your needs!
quality
0
0
Report

Report

A
Great jack
Ally 24.04.2017
Great jack although I will say it looked a little less chunkier and durable in the pictures then it actually was. Still great quality jack.
quality
2
0
Report

Report