JC
Red coding ring
Fits perfectly on Neutrik connectors, the dark red color makes it more subtle and less eye-catching than other bright colors, but it is highly noticeable if you want to identify the cable.
To put it on you will need to unscrew the connector barrel and replace the stock one, usually black. This ring won't fall of or move along the cable, it will always stay lock onto the connector making it permanently marked without using labels that leave glue residues.
To put it on you will need to unscrew the connector barrel and replace the stock one, usually black. This ring won't fall of or move along the cable, it will always stay lock onto the connector making it permanently marked without using labels that leave glue residues.
0
0
Report
l-
Darker colour than in picture
See above... not as bright a red as you'd expect from the product photo. Has its advantages (harder to see on stage) and its disadvantages (harder to see on stage).
Very useful for colour coding cables, easy to change once you've unscrewed the XLR plug.
Very useful for colour coding cables, easy to change once you've unscrewed the XLR plug.
0
0
Report
HL
Cables in good order
This part helps you keep your cables sorted. It is very easy to check which cable is going where when you can see the colour at the end of the cable. It was very easy to install and it costs practically nothing.
1
0
Report
R
The ring is easy to change without unsoldering the connection, you just have to pull a little harder on the old ring and it pops out.
The ring is a bit darker than in the photo, but I like that.
The ring is a bit darker than in the photo, but I like that.
0
0
Report
H
Unclear how to install
The rings are fine quality but it was unclear how to install them. They are springy, and I was not 100% sure I would have to fully tighten them.
0
0
Report
x
Very good
Very good to use, cheap, used to buy a short line, not only the price is expensive, but also the size is not free. Now buy their own wire base to do, very convenient, free control length, this thread quality is good, and cheap, more recommended。
0
0
Report
G
This is for me premium quality I aproove thrue the years, and pay with joy the price, because it disurve, thanks to the neutrik!
0
0
Report
J
Code red for XLR
Works, gives clear indication of right cable in stereo-pair
0
0
Report
N
Dont waste time
I bought a lot of these rings and its very nice for dont be lost when you need to know where your cables are connected on.
0
0
Report
s
easy to apply and useful but low colour brightness
useful and easy to use / install on Neutrix cables. However the colour is in reality quite dull, not as bright as it appears in the image here, so the difference between colours - when working in low light - is not really that great
0
0
Report