K
Great, yet small
I was looking for a small power supply which would fit under my Harley Benton Spaceship 50C pedalboard, which I use for acoustic gigs. I was using a daisy chain to power it, but was getting quite a bit of cycle hum, so I went looking for a solution with isolated outputs.
The board only has 4 pedals, but since one of those is a Boss RC-30 looper which requires about 195mA, I needed something which had a nice amount of juice per output.
So, after looking at several options, I found this Palmer PWT04. Seemed to tick all the boxes with four isolated outputs, and at a very nice price point, so decided to give it a go. My order took a few days to arrive since it wasn't in stock, but everything was sent on the date Thomann already indicated when I ordered, so nothing to complain there.
Unboxing it,I was already impressed. It's tiny and light, but solid. The cables supplied were very nice too. Nice and thick, and a decent length, if you pardon the double entendre. Hooked up my board, and it does exactly what it needs to do. No hum whatsoever, it's dead quiet. Even better, it fits snugly under the board.
Only downsides I can think of is that the cable from the wallwart to the unit isnt that long, and that there are no brackets supplied which allow you to mount it under your board. Not the biggest problems though. You can always bring extension cords and for mounting it I just put some velcro on it. The thing is light enough for velcro to hold for a long time.
Very happy with this thing, can only recommend it.
The board only has 4 pedals, but since one of those is a Boss RC-30 looper which requires about 195mA, I needed something which had a nice amount of juice per output.
So, after looking at several options, I found this Palmer PWT04. Seemed to tick all the boxes with four isolated outputs, and at a very nice price point, so decided to give it a go. My order took a few days to arrive since it wasn't in stock, but everything was sent on the date Thomann already indicated when I ordered, so nothing to complain there.
Unboxing it,I was already impressed. It's tiny and light, but solid. The cables supplied were very nice too. Nice and thick, and a decent length, if you pardon the double entendre. Hooked up my board, and it does exactly what it needs to do. No hum whatsoever, it's dead quiet. Even better, it fits snugly under the board.
Only downsides I can think of is that the cable from the wallwart to the unit isnt that long, and that there are no brackets supplied which allow you to mount it under your board. Not the biggest problems though. You can always bring extension cords and for mounting it I just put some velcro on it. The thing is light enough for velcro to hold for a long time.
Very happy with this thing, can only recommend it.
2
0
Report
FK
Excellent !
This is my 2nd Palmer PS, as my bigger board has a PWT 05.
It fits perfectly under my nano+ board, and it is so light that velcro tape is more than enough to attach it.
Palmer cables are great, don't look cheap and never had a problem w them in the past.
The power adapter's cable is not so long but not short either (around 150cm).
I have six pedals in my nano+ board (3 in a daisy chain, and 3 in separate outputs), and so far i'm impressed w the quality of the PS. No hiss, no hum, no noise at all.
I find it not so clever to go for 3 times the money when you can have this which makes a fantastic job!
It fits perfectly under my nano+ board, and it is so light that velcro tape is more than enough to attach it.
Palmer cables are great, don't look cheap and never had a problem w them in the past.
The power adapter's cable is not so long but not short either (around 150cm).
I have six pedals in my nano+ board (3 in a daisy chain, and 3 in separate outputs), and so far i'm impressed w the quality of the PS. No hiss, no hum, no noise at all.
I find it not so clever to go for 3 times the money when you can have this which makes a fantastic job!
0
0
Report
M
Perfect fit under Pedaltrain Nano
Bought this because I hoped it was small enough to fit under the Pedaltrain Nano which it does, with half a centimeter to spare.
Isolation is also good as far as I can tell. All humming and buzzing I experienced with a power supply directly to the pedal(s) was gone.
Isolation is also good as far as I can tell. All humming and buzzing I experienced with a power supply directly to the pedal(s) was gone.
1
0
Report
VS
High Quality
A very solid, High Quality power supply box. Small size and easy to handle.
1
1
Report
D
reliable solution at good price
never fails, i have different other (cheaper) units which are basically unpredictable, this one is reliable and for sure i will prefer it to bring to a live situation
+ its small size is also very welcomed
+ its small size is also very welcomed
0
0
Report
a
Excellent power supply that now fits pedaltrain metro and nano
I had previously bought the palmer PWT 05 for my pedaltrain Metro after reading some reviews, they said that it was compatible with the pedaltrain nano and metro ,, which it was not, far to big to fit underneath. so I found out that this PWT 04 was is the pipeline for palmer and waited for it to become available, It fits perfect now and provides enough power for my six pedals with no hum whatsoever ,, very good item,
0
0
Report
P
Great Quality
Good price. Well built. No weird noises on my pedalboard.
Need I say more?
Need I say more?
0
0
Report
f
Excellent.
I love it when something small like this does the job, works great, fits everywhere and looks good while doing so. Great sollution for my simple pedalboard. Recomend.
0
0
Report