Customer center login

Palmer PWT 08

8-Output power supply for effect pedals

  • 6x 9V DC outputs (150mA each)
  • 2x Isolated outputs, switchable between 9, 12 or 18 V (each 500mA max)
  • Total 2000 mA
  • Output A and B each 500 mA, 9V outputs each with a maximum 150 mA
  • Outputs can be combined to 21, 24, 30 or 36 V using the included Y-cable
  • Compatible with Palmer Pedalbay (except 50S)
  • Dimensions (W x H x D): 140 x 80 x 32 mm
  • Includes 8 cables

Further Information

DC/AC current DC
Output current in mA 2000 mA
9 V Yes
12 V Yes
18 V Yes
Secondary voltage Yes
Multi-output power supply Yes

These are other customers' choices:

Customers who looked at this item have bought these:

Palmer PWT 08
28% bought this exact product
Palmer PWT 08
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$95 Add to Basket
Palmer PWT 12 MK 2
13% bought Palmer PWT 12 MK 2 $129
Thomann NT 0910 AC/PSA
8% bought Thomann NT 0910 AC/PSA $9.80
Harley Benton PowerPlant ISO-2 Pro
7% bought Harley Benton PowerPlant ISO-2 Pro $68
Harley Benton PowerPlant ISO-5 Pro
7% bought Harley Benton PowerPlant ISO-5 Pro $48
Our most popular Guitar Effect Power Supplies
675 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 /5
  • quality
Total
quality
Insufficient isolation (for my needs)
01.02.2017
Pros: great price, small, plenty of juice, flexible

Cons: wall wart, no on/off switch, insufficient isolation

I was pretty impressed with this overall when I first found and got this. Unfortunately, I started having some noise issues from one of my pedals in pretty extreme situations. I have a bunch of pedals daisychained at 12v and realized that high gain pedals were causing noise in one of my 18v pedals. Troubleshooting revealed that it was an isolation issue. I tried combining two of the 9v outlets, but was getting faults...which also turned out to be an isolation issue. So, this power supply has helped me realize that a lot of the Mooer pedals sound great at 12v, but unfortunately it doesn't quite meet my needs.

The description, and even the manual, is not super clear on this, in my opinion. Ports A&B are isolated from the other six ports, but A&B are not isolated from each other, and neither are the six other outlets. This may or may not be an issue for you, but it will probably lead to me returning it and using my Harley Benton power plant jr.'s a little longer before eventually buying something more expensive (currently out of stock). Bummer!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Could be better but does the job.
Bellenoir, 05.02.2019
I use this as the main power source in my pedal board. Amp I use is Koch Studiotone 20. I get my drive tone from the amp, so I don't use drive pedals.

+ quiet. Doesn't add too much extra noise on its own
+ solid build for the money
+ lots of outputs
+ 2 outputs that go up to 18V

- the 2 iso-outputs are isolated from the other 6, but NOT ISOLATED FROM ONE ANOTHER (at least not to my knowledge), which the product description doesn't mention. Usually, this is not a problem, but for some, it can be.
- I have a DigiTech Jamman and whenever I use it, I need to use the iso-output, because the unit picks up a lot of scratchy digital noise otherwise
- the cables supplied with the unit have right-angled plugs only at one end. I would have preferred on both ends, as you pretty much need to use the right-angle ones into the unit and straight ones into the pedals - which is not optimal at all
- only 150mA of juice per outlet. This might limit your pedal choices.
- I'd have preferred a solid power cable instead of a flimsy adapter
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Perfect little power supply
DDost, 01.05.2021
There's not much bad to be said about Palmer power supplies.
At first I never thought it mattered which supply you bought. But with Palmer I found out how nice it is to have one that does not hiss, hum or crack. These power supplies are Solid with a capital S. I also had the Palmer PWT 12 mk2. Same story: they just work. And quietly at that.
To me the price is very fair. The supplies are compact, they fit under your pedal board if it's inclined.
The plug it comes with is an adapter with a small supple cable. Which is a lot more convenient than a big heavy cable that pops out all the time.

All in all very happy with the Palmer power supplies, would buy again 100%!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Good
GoWithTheFloat, 16.04.2018
The two inputs with adjustable power was what sold me this pedal. 8 slots are definitely more than I regularly use, and if I want to add more power consuming pedals in the future, I have at least two spots covered. It isn't that big either, which is quite nice considering I have a small board and a small room. The biggest downside to this product I have noticed so far is the lack of a on/off-switch which I find a bit strange. I would also have liked the power input to be at the back of the pedal, but that isn't exactly a big problem.

For the price however this power supply is very good, and fits my needs nicely with room for a future bigger collection of pedals.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$95
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
 
 
 
 
 
 
 
 
 
 
test results:
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.