Rivera RockCrusher Gold

12

Attenuator

  • Power reducer and load resistor for tube amplifiers
  • Load resistor and power reduction up to an amplifier power of 120 W RMS
  • Natural sound at any volume
  • Impedance: selectable between 8 and 16 ohms
  • Reactive internal circuit for real amplifier / load interaction
  • High heat capacity ensures cool operation and long life
  • Tight impedance tolerances
  • XLR and unbalanced line outputs with volume control
  • Bass and treble sound section selection
  • Full bypass without losses
Available since December 2018
Item number 450708
Sales Unit 1 piece(s)
Impedance 8, 16
Noise Supression No
DI Interface No
Speaker Simulation No
Dummy Load (usable without cabinet) Yes
$683
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

12 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

sound

quality

9 Reviews

J
Best attenuator
Jonathan-Taylor 04.12.2019
I got a tube amp doctor for use with a Marshall JCM 800 2203X and burnt out 2 units within months.
The rockcrusher was recommended to me by many Marshall owners and it is perfect.
Lowering volume the amps tone don't change.
features
sound
quality
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
w
Rivera RockCrusher Gold – Macht was er soll
wawa 10.04.2020
Ich habe den Rivera RockCrusher in Gold gekauft, weil er farblich besser zu meinen Marshall Topteilen passt als das Lila des Standardmodels.
Der Rivera ist ein guter Attenuator. Er kann wahlweise mit 8 oder 16 Ohm betrieben werden. Bei anderen Herstellern müssen oft zwei separate Geräte gekauft werden. Deshalb ist auch der etwas hohe Preis noch in Ordnung.
Ich habe einen JVM 410H mit 100 Watt bis auf null runtergeregelt. Das ist schon heftig, was das Teil an Leistung wegstecken kann.
Wenn ein Attenuator verwendet wird, ist immer ein wenig Verlust am Klang einzukalkulieren. Das ist normal und sollte immer im Hinterkopf behalten werden. Aber das Signal bleibt beim RockCrusher als Originalsignal erkennbar. Wie gesagt, mit kleinen Abstrichen.
Die Bedienung ist einfach und die Buchsen sind gut gekennzeichnet. Fehlbedienung ist somit kein Thema.
Bei Bedarf können über zwei Kippschalter Höhen und Bässe hinzugefügt werden.
Er benötigt keine eigene Stromversorgung und hat keinen Lüfter, weshalb er ohne Störgeräusche betrieben werden kann.
Fazit:
Ich bin sehr zufrieden mit dem RockCrusher.
Wenn also ein Attenuator benötigt wird, ist der Rivera RockCrusher eine gute Wahl.
features
sound
quality
2
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
S
Rivera RockCrusher Attenuator
StratGuy 10.03.2019
It does extremely well what is designing for. No differences between my Aracom and this new boy during the AB test. Edge switch is very efficient to maintain dynamic response. I'm not going beyond 20dB attenuation since my amp has a PPIMV (1987 + 1960).

Having a stereo rig set up it was an evidence to get one attenuator per amp. So now I'm fully satisfied.
features
sound
quality
1
0
Report

Report

google translate es
Unfortunately there was an error. Please try again later.
A
Atenuador Rivera.
Alexperience 20.11.2022
Tengo varios amplificadores Marshall de 100W, de válvulas e híbridos.
El atenuador de llaves, responde perfectamente a mis necesidades, su aspecto es robusto y se aprecia la calidad del dispositivo tanto en la prestación del sonido como en los elementos de control.
Las únicas pegas que veo al dispositivo son :
- Solo acepta impedancias de 8 y 16 ohms. hubiese estado perfecto si también aceptase impedancias de 4 ohms, pero esto ya lo sabía cuando lo pedí.
- El conmutador con el que seleccionas la impedancia se encuentra en el frontal entre el botón de Attenuator mode_Bypass y los interruptores de los filtros paso alto y paso bajo. Todos ellos muy juntos entre si y del mismo color.
Con lo cual para mi modo de ver, me resulta un tanto peligroso, ya que todos ellos son de color negro, y estando el ampli en funcionamiento, puedes dar por error a este conmutador cuando quieres activar por ejemplo el filtro paso alto. Yo, hubiese puesto este conmutador de impedancia en la trasera, o al menos haberlo puesto de otro color para diferenciarlo de los demás interruptores. Puedes cargarte el ampli si por error conmutas la impedancia mientras el ampli está funcionando.

Por lo demás muy contento con el atenuador, y el modo de "Studio" es fantástico para poder utilizar estas malas bestias de amplificadores de 100W en casa para no molestar a los vecinos.
features
sound
quality
0
0
Report

Report