Rockboard FlaX Plug MIDI Cable 60 cm

126

Flat MIDI Cable

  • Length: 60 cm
  • With rectangular profile and compact omni-directional plugs
  • Plug direction can be angled from straight in 2 directions by 90°
  • Plug alignment lockable with 1.5 mm hex key (not included)
  • Compact design saves space on the pedalboard
  • Flat rectangular cable prevents cable breakage and twisting and keeps the setup clear
  • Suitable for use with Clock / SYNC functionality & phantom power
  • Flexible copper conductor 5 x 7 x 0.12 mm
  • Angled DIN 5 pin plug
  • Max. nominal current 1A
  • PVC external insulation
  • Operating temperatures: -20°C to +60°C
  • External dimensions of cable (W x H): 6.5 x 3.5 mm (rectangular)
  • Outer dimensions, straight plug (L x W x H): 33 x 20 x 15 mm
  • Outer dimensions, angled plug (L x W x H): 33 x 20 x 20 mm
  • Colour: Black
available since November 2018
Item number 451391
sales unit 1 piece(s)
Colour Black
Length 0,60 m
Connector from DIN 5-pin (MIDI) male
Connector from DIN 5-pin (MIDI) male
$5.60
The shipping costs are calculated on the checkout page.
In stock
In stock

This item is in stock and can be dispatched immediately.

Standard Delivery Times
1
M
finally THE MIDI cable
Marco_erre 14.11.2019
i juggle with midi and midi cables since 15 years and this is the most useful and surely definitive solution for cable management.
no ONE midi device has the midi plugs in the same mounting direction, so when you get a L cable bear in mind you are just lucky if the L goes the way you want.
straight midi plugs need a lot of real estate , and in a pedalboard you can be out of that space quickly. this is genial, you can plug the cable and just turn it the way you need it to go (obviously in the two direction possible, up or down, or left or right , depending how the midi plug on your device is mounted)

the best midi cable i foud until today. the only thing better would be a rotating cable-bender like the one mounted on this but 360 degree. that would be priceless.
quality
1
0
Report

Report

D
Keep your cables under your board
DimKoski 10.11.2020
Very helpfull construction,allows you to set an angle connector the way it fits with your pedal's midi ports. No matter if the pins of your device are in "smile" or "eye brow" shape, you can turn the connectors to any direction you like, by using a screw driver. In this way,not only you keep a clean board,but you also ensure that your connectors will live forever. For the midi users it's a must!
quality
0
0
Report

Report

m
not great at all
mindburner 07.08.2020
This lead is really stiff and hard to insert into a MIDI socket. The ends of the screws come though the bolts and dig into your hands when inserting the plug. After a few weeks the outer plastic comes off to reveal a cheap glued interior. The lead may be ok for a one off job and then leave, but if you need to unplug it regularly then you will have sore fingers. It's on of the worst I have used in a studio of over 30 vintage synths.

Pro - it can bend
cons - it's badly finished, rough to use
quality
0
0
Report

Report

b
Sturdy and versatile
busy_b 16.02.2020
I needed short MIDI cables for creating a chain of various equipment in limited space. The cable length and rotating connectors fit the task perfectly. The small screws can be loosened for easier bending of cord, than tightened again. The MIDI connectors are sturdy, collar and pins are firmly set in plastic.
quality
0
0
Report

Report