Rode PSA-1

Professional Table Microphone Boom Arm

  • For table mounting
  • For radio, podcaster, pro and broadcaster
  • 3/8" Thread
  • For microphones from 700 g to approx. 1.1 kg
  • Rotates 360 degrees
  • Dimensions of the arms: 820 mm horizontal, 840 mm vertical
  • Colour: Black
  • Incl. Table mounting accessories: Screw clamps for table tops up to 55 mm and hollow bolts for table tops up to 70 mm

Further Information

Type Microphone Boom
Height 820 mm

These are other customers' choices:

Customers who looked at this item have bought these:

Rode PSA-1
71% bought this exact product
Rode PSA-1
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$85 Add to Basket
Millenium MA-2040
4% bought Millenium MA-2040 $19.90
K&M 23325 Table Microphone Stand
3% bought K&M 23325 Table Microphone Stand $31
K&M 23840 Microphone Arm
3% bought K&M 23840 Microphone Arm $58
Millenium DS200 Black
2% bought Millenium DS200 Black $68
Our most popular Desktop Mic Stands
1170 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 /5
  • stability
  • quality
Total
quality
stability
Lack in quality even though it's relatively expensive
Rode PSA-1, 07.06.2021
TLDR: Hinges and internals are not greased from factory which causes unnecessary wear and noise upon use.

I have experienced what seems to be an "issue" with ALL PSA-1 arms. It squeaks and there's a metal grinding noise. One of the hinges can be oiled from the outside (which should not be ungreased/unoiled on such an expensive product) but there's a pin that is also ungreased on the inside that requires light disassembly to get to which is ridiculous. Once all this is done the arm functions properly. This is not a "problem" per se since Rode seem to not do this at the factory and are obviously aware since this happens to what seems to be everyone that bothers to even check their product before use, if they do not later notice it during. This will most likely never be fixed because of how long this product has been on the market.

The quality itself is closer to a 4 but gets a 2 star because of the problem above. Stability is decent but is a bit wobbly if your desk isn't stable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Very impressed
Andy, UK, 17.01.2019
This desktop stand works well.

I used the standard base to clamp it to my desk (instead of the option to drill a hole in the desk) and this is stable with zero wobble in the base. Everything seems well made and sturdy.

Without a mic when you move the arm the springs move it toward a neutral position when you release the arm. After mounting a mic, that stops.

I mounted a Rode NT1-A Complete Vocal Recording on the end. With that weight on the arm, it is nicely balanced, easy to move, and stays where I put it without adjusting any clamps. It has a reach of more than a metre, and rotates very easily - the arm turns smoothly on the base, and the mic turns freely on the arm. Nice and flexible.

One minor downside - the arm has parallel metal bars which move closer or further apart as you move the arm up and down. These have squared edges and you can nip your fingers a bit if you hold that wrong.

Very happy - very good stand
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Perfect combination!
Audio geek, 09.05.2021
As part of a studio rebuild I bought four of these booms to replace some aging and very twangy booms of dubious origin! Our main studio uses the SM7B and the PSA-1 supports these very well, balance is perfect and with a little patience feeding the mic cable through the channel in the upper leg of the arms and down through the centre of the base spigot gives a superbly sleek finish. As our guest positions were a custom made desk it was great to to use the circular flush desk mount drilled into the surface with its neat nylon collar (to avoid metal on metal) and a chrome bezel with the Rode logo on it. Nice touch of quality from end to end. The SM7B is hung from the spigot in it's classic formation and looks the part but he only point to note is the microphone's XLR connector casting restricts the horizontal movement a little at extremes but this isn't detrimental to normal use.

Overall the Rode quality is present and these booms represent excellent value for money. They have an adequate reach and style without being overly like staring at an angle poise lamp draped across the desk. Every house should have one!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Very sturdy and stable boom arm
Andy Ch, 12.02.2021
Fixed it to my kid's table and to a bookshelf, stays in place perfectly. It's built with some strong springs, have to watch your fingers when no microphone is mounted, the mount will straighten itself. Some lighter microphones can't be used with it unless you add some more weight to the mic -- a shockmount, pop filters and xlr cables will do :)
Rode Podmic (weighing almost 1kg) stays perfectly still on it. An Audio Technica AT2035 on its shockmount is just the right weight, a couple dozen grams less, and the mount wants to unfold from whatever position you try to put it into.
Overall a very good product for its intended use :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$85
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.
1
(1)
Recently Viewed
Kali Audio IN-8 2nd Wave

Kali Audio IN-8 2nd Wave; Active near field monitor; 3 way system with coaxial midrange/tweeter; 8" woofer; 4" midrange; 1" soft dome tweeter; power: 140 Watt (60/40/40 Watt Tri-Amped); frequency range: 37 Hz - 25 kHz (-10 dB), 45 Hz…

Recently Viewed
Novation Circuit Rhythm

Novation Circuit Rhythm; sampler / sequencer; 8 sample tracks with 32 step patterns each, cascadable for up to 256 steps per track; functions: slice, reverse, loop, chromatic play, probability and pattern-mutate; integrated effects such as lofi tape, shutter, reverb, delay…

1
(1)
Recently Viewed
Arturia Keystep 37 Black Edition

Arturia KeyStep 37 Black Edition; 37-key (slimkey) USB controller keyboard; velocity-sensitive mini-keys with aftertouch; 64-step sequencer; chord and scale functionality; arpeggiator; LED display; 4 freely assignable knobs; transport keys; touch stripes for pitch and modulation; RGB LED bar; connections: 3x…

1
(1)
Recently Viewed
Fender SQ Aff. P Bass MN PJ PACK BK

Fender Squier Affinity P Bass MN PJ PACK Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: c; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 41,3 mm…

Recently Viewed
Neural DSP Quad Cortex Gigcase

Neural DSP Quad Cortex Gigcase; Softlight Case for Neural DSP Quad Cortex Pedal; precision molded, high-impact and designed to keep your Quad Cortex safe from damage and the elements; the top clamshell includes a secure, elastic neoprene panel where you…

Recently Viewed
Fender SQ Aff. Strat HSS PACK CFM

Fender Squier Affinity Stratocaster HSS Pack Charcoal Frost Metallic; Stratocaster Electric Guitar Set; Affinity Series; Body: Poplar; Neck: Maple; Fingerboard: Laurel; Neck Mount: Bolt-On; Neck Shape: C; Inlays: Pearloid Dots; 21 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 42…

Recently Viewed
Harley Benton CLA-15MCE SolidWood

Harley Benton CLA-15MCE SolidWood; Auditorium Cutaway Acoustic-Electric Guitar, Custom Line Solid Wood Series; Back & Sides: Solid Mahogany; Top: Solid Mahogany; Neck Shape: Oval C; Neck: Mahogany; Fingerboard: Pau Ferro; Scalloped X Bracing; Inlays: SnowFlake Inlays; 20 Frets; Nut: Bone;…

1
(1)
Recently Viewed
Sennheiser CX True Wireless Black

Sennheiser CX True Wireless Black In-Ear headset headphone - 7 mm hight end drivers, bluetooth 5.2, up to 9 h running time, up to 27 h with charging case, SBC, AAC, aptX Codec compatible, 110 dB SPL (1 kHz /…

1
(1)
Recently Viewed
Minuendo Lossless Earplugs

Minuendo Lossless Earplugs; Earplugs with passive hi-fi filter - perfect for rehearsals, concerts and in any other noisy location; Continuously adjustable volume attenuation (-7db to - 25 db) without sound loss; Neutral and natural sound; Patented adjustable membrane for volume…

Recently Viewed
Gravity LTST 01

Laptop stand with adjustable holding pins Steel tray, Powder-coated tubes made of aluminium, Die-cast aluminium base, Dimensions of the tray (W x H): 480 x 330 mm, Tube diameter: 35 mm, Height adjustment by adjusting screw with holding pin…

Recently Viewed
Casio CT-S400

Casio CT-S400 Keyboard - 61 touch-responsive keys, 48-note polyphony, AiX Sound Source, 600 sounds, 200 rythmens, 160 Songs, Auto Harmonize, automatic accompaniment, Reverb, Chorus, DSP, Master EQ, Volume Sync EQ, 10 User Songs, connection to free Chordana Play For Keyboard…

1
(1)
Recently Viewed
Aiaiai TMA-2 Studio

Aiaiai TMA-2 Studio; closed-back studio headphones; Design: closed-back, circumaural; S05 speaker unit; Bio cellulose diaphragm; 40 mm high-grade neodymium driver; Frequency range: 10 Hz - 40 kHz; Maximum output: 100 mW; Sound pressure level: 113 dB; Impedance: 32 ohms; E08…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.