Rode PSA-1

Professional Table Microphone Boom Arm

  • For table mounting
  • For radio, podcaster, pro and broadcaster
  • 3/8" Thread
  • For microphones from 700 g to approx. 1.1 kg
  • Rotates 360 degrees
  • Dimensions of the arms: 820 mm horizontal, 840 mm vertical
  • Colour: Black
  • Incl. Table mounting accessories: Screw clamps for table tops up to 55 mm and hollow bolts for table tops up to 70 mm

Further Information

Type Microphone Boom
Height 820 mm

These are other customers' choices:

Customers who looked at this item have bought these:

Rode PSA-1
73% bought this exact product
Rode PSA-1
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$88 Add to Basket
Millenium DS200 Black
3% bought Millenium DS200 Black $69
Blue Microphones Compass
3% bought Blue Microphones Compass $119
K&M 23840 Microphone Arm
2% bought K&M 23840 Microphone Arm $59
Fun Generation Podcast Stand
2% bought Fun Generation Podcast Stand $15.90
Our most popular Desktop Mic Stands
1144 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 /5
  • stability
  • quality
Total
quality
stability
Lack in quality even though it's relatively expensive
Rode PSA-1, 07.06.2021
TLDR: Hinges and internals are not greased from factory which causes unnecessary wear and noise upon use.

I have experienced what seems to be an "issue" with ALL PSA-1 arms. It squeaks and there's a metal grinding noise. One of the hinges can be oiled from the outside (which should not be ungreased/unoiled on such an expensive product) but there's a pin that is also ungreased on the inside that requires light disassembly to get to which is ridiculous. Once all this is done the arm functions properly. This is not a "problem" per se since Rode seem to not do this at the factory and are obviously aware since this happens to what seems to be everyone that bothers to even check their product before use, if they do not later notice it during. This will most likely never be fixed because of how long this product has been on the market.

The quality itself is closer to a 4 but gets a 2 star because of the problem above. Stability is decent but is a bit wobbly if your desk isn't stable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Perfect combination!
Audio geek, 09.05.2021
As part of a studio rebuild I bought four of these booms to replace some aging and very twangy booms of dubious origin! Our main studio uses the SM7B and the PSA-1 supports these very well, balance is perfect and with a little patience feeding the mic cable through the channel in the upper leg of the arms and down through the centre of the base spigot gives a superbly sleek finish. As our guest positions were a custom made desk it was great to to use the circular flush desk mount drilled into the surface with its neat nylon collar (to avoid metal on metal) and a chrome bezel with the Rode logo on it. Nice touch of quality from end to end. The SM7B is hung from the spigot in it's classic formation and looks the part but he only point to note is the microphone's XLR connector casting restricts the horizontal movement a little at extremes but this isn't detrimental to normal use.

Overall the Rode quality is present and these booms represent excellent value for money. They have an adequate reach and style without being overly like staring at an angle poise lamp draped across the desk. Every house should have one!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Very impressed
Andy, UK, 17.01.2019
This desktop stand works well.

I used the standard base to clamp it to my desk (instead of the option to drill a hole in the desk) and this is stable with zero wobble in the base. Everything seems well made and sturdy.

Without a mic when you move the arm the springs move it toward a neutral position when you release the arm. After mounting a mic, that stops.

I mounted a Rode NT1-A Complete Vocal Recording on the end. With that weight on the arm, it is nicely balanced, easy to move, and stays where I put it without adjusting any clamps. It has a reach of more than a metre, and rotates very easily - the arm turns smoothly on the base, and the mic turns freely on the arm. Nice and flexible.

One minor downside - the arm has parallel metal bars which move closer or further apart as you move the arm up and down. These have squared edges and you can nip your fingers a bit if you hold that wrong.

Very happy - very good stand
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Very sturdy and stable boom arm
Andy Ch, 12.02.2021
Fixed it to my kid's table and to a bookshelf, stays in place perfectly. It's built with some strong springs, have to watch your fingers when no microphone is mounted, the mount will straighten itself. Some lighter microphones can't be used with it unless you add some more weight to the mic -- a shockmount, pop filters and xlr cables will do :)
Rode Podmic (weighing almost 1kg) stays perfectly still on it. An Audio Technica AT2035 on its shockmount is just the right weight, a couple dozen grams less, and the mount wants to unfold from whatever position you try to put it into.
Overall a very good product for its intended use :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$88
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.
Recently Viewed
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

3
(3)
Recently Viewed
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

Recently Viewed
XAOC Devices Moskwa II

XAOC Devices Moskawa II; Eurorack module; 8 Step Rotosequencer; 8 steps, each with CV control knob and on/off button; for each step programmable functions like slew (portamento), slew probability, gate/trigger probability; up to 8 gate/trigger pattern programmable for each step;…

Recently Viewed
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

3
(3)
Recently Viewed
Quilter Superblock US

Quilter Superblock US, Solid State Pedalboard Amplifier for Electric Guitar; Three Classic US Amplifier voicings: 60 Tweed, 62 Blonde & 65 Black; comparable power to a 25-Watt Tube Amp when powered by the supplied PS-24 Power Supply or 1 Watt…

Recently Viewed
Fender SQ Aff. Jazz Bass MN Black

Fender Squier Affinity Jazz Bass MN Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 38,1 mm (1,5"); Scale:…

Recently Viewed
Zhiyun WEEBILL-S Gimbal

Zhiyun WEEBILL-S Gimbal; Three-axis gimbal for DSLR and mirrorless system cameras; simple and safe handling thanks to new algorithms and stronger motors even for fast movements; compact dimensions make the gimbal the perfect companion for reportage and action shots; ergonomically…

Recently Viewed
RAV Vast B/H Kurd red

RAV Vast2 B Kurd red edition, B2/ F#3, G3, A3, B3, C#4, D4, E4, F#4, A4, Handpans-inspired steel tongue instrument, 2mm Steel, diameter 51cm, hight 17cm, weight 5,9kg, incl. bag

Recently Viewed
Zhiyun Smooth Q3 Gimbal

Zhiyun Smooth Q3 Gimbal; professional 3-axis stabiliser for smartphones; integrated fill light with three brightness levels; gesture control and Smart Following for automated tracking of people in the field of view; panorama mode with "Magic Clone" function; ZY Cami app…

Recently Viewed
XAOC Devices Ostankino II

XAOC Devices Ostankino II; Eurorack Modul; expander for Moskwa II sequencer (item 521036); expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step; oputput for the internal clock signal; individual gate…

Recently Viewed
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

1
(1)
Recently Viewed
Libec TH-Z Camera Tripod

Libec TH-Z Camera Tripod; tripod system with tilt and centre spreader; features a video head (TH-Z H) with DualHead system, that can be used for both 75 mm half shell and flat base tripods; video head can be mounted on…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.