Schaller M6 135 Locking 3L/3R BC

129

Clamping Machine Head Set for Electric Guitar

  • Precise, wear-free premium mechanisms
  • Small, lightweight design
  • Model: 3 Left/right
  • With Velvet-Tec and LX6-Lube technology
  • Very high quality surface finish due to improved manufacturing processes
  • Construction: Closed
  • Wings: M6 Metal large
  • Ratio: 1:18
  • Shaft length: 19.5 mm
  • Bore: 9.8 mm
  • Mounting: Screws & Locknut
  • Screw ear: 135°
  • Schaller article nr: 10020423.02.52
  • Finish: Black chrome-plated
  • Including: Fixing screws, banjo bolts and washers
  • Made in Germany
Available since January 2003
Item number 159043
Sales Unit 1 piece(s)
Colour Black
$125
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

129 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

74 Reviews

AF
Quality upgrades for 3+3 headstock
Andy Fereday 11.11.2020
I got a set of these to go on a Peavey SC-2 which I'm using as a platform for upgrading. They fit the existing holes very well and were really straightforward to fit. I put them on at the same time as a String Butler (the V3 model) and didn't have any problems fitting both together.

Installing new strings was really easy and quick. I didn't wrap the strings round the posts at all, just threaded them through the post, tightened the locking screw on the back, trimmed the ends off and tuned up. I was a bit nervous about whether this would hold the strings tightly enough, especially after cutting the ends down so short. Have to say, they're holding absolutely fine.

Tuning stability is really good with these on. You'll need to allow strings to stretch for a couple of days but then they seem to hold tuning really well.

The only word of caution I have is that the black coating can be easy to scratch when you're installing the machine heads. What I found helped was using one of those spanners that fits over the nut completely (the sort that comes in Ikea kits).

Very happy with these machine heads. They feel like they're really good quality. They're not exactly stiff to tune but they don't have that loose feeling of the old tuners I had on the guitar.
quality
1
0
Report

Report

r
outstanding
rabid 14.12.2021
love the feel of these, and they look great.
Couldn't do without the locking tuners now lol
quality
0
0
Report

Report

RA
Great tuners - but just watch out for the shortish capstan
Rick A 06.11.2022
These replaced very old Gotohs without any need for additional screw holes, which made life very easy. However what I had not realised is that the capstan height is shorter, leaving very little to rise above the headstock. I had a choice of either sending them back or reducing the thickness of the headstock and I did the latter, sanding about 2mm off the back of it so that when fitted the capstan holes were nicely positioned to take the strings. Quite obviously this would not have been an option for the majority of projects, so just check that capstan height before you order to make sure it is sufficient. If it is then you're good to go, if not I suggest looking elsewhere. Now they fit I am very happy with them.
quality
0
0
Report

Report

T
Top notch quality tuner
TerryMcK 23.08.2013
These locking tuners appear to be made from brass but coated with a flawless black finish probably paint. They fit into a 10mm diameter hole with a washer and locknut showing on the face. They also are prevented from turning in the hole by a small screw into the wood of the headstock on the rear. Stringing a guitar is ultra quick now. You loosen the knurled clamp screw, push the string through the hole, tighten the clamp screw and tune the guitar. In practice this is no more than 3/4 of a turn. Then snip off the excess. Very neat, quick and tidy.
quality
1
0
Report

Report