Strymon Conduit MIDI Hub

4

MIDI interface

  • Works with most effect pedals with 6.3 mm stereo jack MIDI connection
  • Independently configurable
  • Sends MIDI control change messages from a sequencer to synchronise pedal parameter changes
  • Automated pedal preset changes
  • Loads and saves presets or sends SysEx messages - all from the computer
  • Distributes MIDI messages from a MIDI controller or interface to devices connected to the 1/4-inch jack and 5-pin DIN MIDI OUT connectors
  • All MIDI data received from the pedals at the 1/4-inch jacks is merged and sent to the 5-pin DIN MIDI connector
  • LED: Effect On
  • Footswitch: Effect Bypass
  • MIDI In & Out: 2 x 5-PIN DIN
  • MIDI connection 1-4: 4 x 6.3 mmm stereo jack
  • Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
  • Power consumption: 50 mA
  • Power supply via USB or a 9 V DC mains adapter (not included, suitable mains adapter: art. 409939)
  • Dimensions (W x D x H): 90 x 72 x 38 mm
  • Weight: 141 g
  • Incl. 4 x 46 cm right angle to straight jack cable, 1 x USB Type-C to USB-A Male cable
  • Made in USA

Note: Battery operation is not supported

Available since July 2021
Item number 521393
Sales Unit 1 piece(s)
Amount Of Inputs 5
Amount Of Outputs 5
SMPTE Timecode No
Serial Port No
$145
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

4 Customer ratings

4.3 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

quality

2 Reviews

google translate de
Unfortunately there was an error. Please try again later.
F
Guter Midi-Verteiler
Frankz1604 25.11.2023
Ich verwende das Conduit in Verbindung mit Strymon Effektpedalen, die einen TRS midi-Anschluss haben. Zur Verkabelung verwende ich nicht die mitgelieferten Kabel sondern kürzere 6,3 TRS – TRS Patchkabel. Das Conduit macht für mich was es soll und lässt bisher keine Wünsche offen.
handling
features
quality
0
0
Report

Report

google translate nl
Unfortunately there was an error. Please try again later.
FW
alleen echt handig als je pedalen TRS Midi ondersteunen,
Frank Wolf 31.08.2021
Een compact en degelijk product, zoals je van Strymon gewend bent. Duidelijke handleiding en eenvoudig in het gebruik.

Helaas kun je hiermee niet de BigSky, Timeline, Mobius en Nightsky via 1/4 inch TRS Midi aansturen. Daar kwam ik pas achter toen ik het geheel probeerde werkend te krijgen. Door Strymon support bevestigd: deze pedalen ondersteunen geen 1/4" TRS Midi via de EXP port. Voor Midi-controle op deze pedalen moet je terugvallen op de 5 pin DIN Midi-poorten.

Het marketing filmpje op YouTube laat een Nightsky en Volante pedaal zien op een pedalboard met 4 kleinere Strymon pedalen die wel TRS Midi ondersteunen. Als je goed kijkt, zie je dat voor de Nightsly en Volante gebruik wordt gemaakt van de 5 pin DIN Midi-poorten. Het zou prettig zijn geweest als dit duidelijk bij de productbeschrijving was vermeld.

De Conduit is wel als Midi-host te gebruiken, waarmee je via USB-C en de 5-pin Midi poorten 1 pedaal kunt aansturen (of meerdere als ze via Midi-Thru doorgelust zijn). Maar dat is een omslachtige methode waarvoor eenvoudigere en goedkopere oplossingen beschikbaar zijn.
handling
features
quality
7
13
Report

Report

YouTube on this topic