Swissonic NT10A

12

Active studio monitors

  • 80-watt bi-amplified two-way system with class D amplifiers
  • Power: 50 watts + 30 watts
  • Speakers: 7” (178 mm) woofer + 1.25" (32 mm) tweeter with natural silk dome
  • Frequency response: 50 Hz - 20 kHz
  • Crossover frequency: 2 kHz
  • Low frequency switch: -2 dB, 0 dB, and +2 dB
  • High frequency switch: -2 dB, 0 dB, and +2 dB
  • Low-pass switch: 56 Hz, 80 Hz, and 100 Hz
  • Mid frequency control: Variable (-15 dB to +6 dB)
  • Standby function
  • Cabinet: MDF with real wood veneer
  • Dimension (W x H x D): 215 x 382 x 198 mm
  • Weight 6.5 kg

Inputs:

  • XLR (balanced)
  • 6.3 mm (1/4") jack (balanced)
Available since April 2021
Item number 488064
Sales Unit 1 pair(s)
Speaker size 1x 7", 1x 1.25"
Amplifier power per unit (RMS) 80 W
Magnetic Shielding No
Analogue XLR Input Yes
Analogue Input (Jack) Yes
Analogue Input (Mini Jack) No
Analogue Input (RCA) Yes
Digital input No
Manual frequency correction Yes
Frequency range min. 50 Hz
Frequency range max. 20000 Hz
Dimensions in mm 215 x 382 x 198
Weight in kg 6,5 kg
Speaker Hous8ing - Woofer System Closed
Show more
$227
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

12 Customer ratings

4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

sound

quality

9 Reviews

AS
Noisy Love
Andrei Socherel 12.12.2022
Here are my observations, gripes and jubilations about this strange and quirky pair of monitors.

REW Findings
Starting on the low end I can see a bass roll off starting at 100hz. Similar to the original NS10
The low filter is at 56hz, 80hz and 100hz. Again, minimal differences as the woofer starts to cut off at about 100hz by design.
The +/-2db low and high shelves do exactly as stated. Nothing too special here, useful for adjusting to most listening conditions but barely, 2db is 2db after all.
Now the MF (mid frequency control) sparks interest. It sits firmly at the crossover between the woofer and the tweeter, at 2khz. It’s range is -13db to +6db (indented at the 0db) mark. Cutting too deep here, in my honest opinion, is counter productive to the intended purpose of these speakers. Their magic is in the midrange as are the original from Yamaha.

At 3khz I can see and hear a bump in the frequency response. This is where the tweeter lives in all it’s painful style

I’ve also tested the pair with and without the included cloth covers. As far as my ears and REW tell me they have impart no change on the sound.

The tweeter and its 3000 hz bump.
Love it or hate it, that’s all I can say in a nut shell. I love it for what it does to the mixing experience. I’ve owned, tested and tried a bunch of other monitors. Mixing with those other monitors has always been a hassle for me. I often found myself pushing +/-6db on an EQ and barely hearing any change in that 1000khz to 4000khz range. Not with these NT10a, I can just move the EQ 1db in any direction and the change is imediate and conclusive. I love them for that. On the other hand, mixing with 3khz bump for a prolonged period of time is exhausting. God forbid you accidentally boost something at 3khz… ice picks right in the eardrum.
No the -2db high shelve does not help here. No the MF adjustment does not help here either.
They both affect just above and bellow the 3khz bump.
Nonetheless I’ve tried to increase the MF control to +3db and more in an attempt to mask the 3khz bump but I wasn’t satisfied, this changes the character too much.

They are covered in a satin black veneer with tasteful wood texture. Cabinet edges are perfect, no sharp corners, no signs of glue, just perfect.

The tweeter is a faithful reproduction of the original Yamaha design. Silk dome, slightly larger than any similar dome tweeter, exposed lead wires that come out of its front. It’s protected by a robust metal mesh grille, solid, doesn’t bend

The woofer is also a close reproduction of the original. Paper pulp cone, glued dustcap, aged white aesthetic with a rubberised cloth suspension. I love it. The woofer is also mounted solidly in the cabinet with 4 screws, perfectly centred, no tilt, no nothing, just right.
Other users have mentioned that the paper woofer cone is “dirty” I can assure you it’s not. Any particles visible upon close inspection of the cone are actually paper fibres embedded in the cone. Of course they do not impact the sound in any way. Please do not attempt to clean or remove them, damage to the cone is sure to come if such zealous ideas arise. There may be some stray black glue residue from when they glued the dust cap on the woofer, just be gentle when trying to clean that.

The included cloth covers are top quality as well, soft black fabric, they easily let air move through.
The fabric is tightly glued onto a plywood frame with cutouts for the tweeter and woofer. The plywood frame is painted black and it’s robust, does not bend in any way.
They are held on with friction. Four rubber grommets in the cabinet hold firmly the 4 plastic legs of the covers.

The heartbreak…
Unfortunately this price-point comes with a really bad consequence. The integrated class D amps are noisy. Really, really noisy. Too noisy for near field monitoring. I’m not even going to mention the spl level of the noise, that bad.
At least the noise is more akin to tape hiss than anything else, no 60 cycle hum, no crackling, just a constant tape hiss from the amps. Which makes it tolerable.

Worth mentioning here is that I’ve never heard nor owned an original NS10 pair.
These Swissonic NT10a’s do exactly what everybody and their mother claim the originals do. Mid focused sound, present, concise, excellent transient response (even with the low quality integrated amps). Really puts a magnifying glass on your mix, on what subjectively might be the most important part of any mix, the magic in the midrange. Even with the limited bass response I’ve found that the mixes I did through these actually turned out to have the most balanced and deep bass I’ve ever heard out of my productions.

Can I recommend these? Yes, absolutely yes. If these ever break for whatever reason I’m just going to order another pair. I really, really like them even with the bad noise. The price-point implies that they can be on the radar of beginners. I don’t feel that’s the case. As a second pair of monitors to check your mixes on? Yes please get a pair.

Also I would like to ask, beg and implore Thomann and Swissonic to make a pair of these without any integrated amplification. Just make a passive pair with either bi-amping possibilities so that we can power the tweeter and the woofer separately or just a passive pair with a passive crossover. The woofer and the tweeter are just too good to be bogged down by cheap and noisy class D amps.
features
quality
sound
20
0
Report

Report

b
Great potential let down by quality issues
beau17 25.12.2021
The NT10A sound great in my opinion, there are some discrepancies when comparing against the Y model so you may feel displeased if hoping for an exact match but in their own regard are a solid choice for the intended purpose.

Swissonic have also added some welcome changes such as active design, numerous adjustments on the rear and a relatively low price per pair so they don't hesitate to bring their own charm to the table.

That being said however, there are some issues which I can't gloss over:

¬ XLR input does not have a locking feature (sits quite loose)
¬ Very loud hardware noise (hiss)
¬ Standby mode (turns off even at low volume despite a constant signal)
¬ White cones were very dirty upon arrival.
¬ No off switch for standby mode

I have requested a replacement unit under warranty so will update as the need arises.

Update (4/2/22):

Replacements have arrived and are sadly displaying the same issues as before but now have severe distortion on the highs similar to a bitcrusher, I will sadly have to return them and ask for a refund as I can only assume that the fault lies with the wider range..

I genuinely hope Swissonic will address the issues as there is much potential for the NT10A to become a real contender given the chance and a little bit of loving.

I will gladly come back after some revisions are made.. but until that day arrives I will unfortunately have to look elsewhere.
features
quality
sound
10
0
Report

Report

J
Great for referencing
Jack314 10.03.2024
I use these to reference against my main monitors and for the price they are excellent. The highs are very softened and the lows are substantially less prominent up to around 200-400Hz (in the room I’m using so this may differ). Overall great for forcing you to focus on that midrange. I doubt there will be a better pair of reference monitors in this price range unless you’re getting some second hand NS-10’s. Build quality is also very sturdy and well done. Shipping was quick and easy. Would definitely recommend to those with lower budgets
features
quality
sound
0
1
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
>
Sie tut was sie soll!
>DE< 16.09.2022
Einleitung

Die „Swissonic NT10a“ habe ich mir zugelegt, um meine DIY Minibreitbänder zu ersetzen oder zumindest zu ergänzen. Außerdem wollte ich herausfinden, wie nah die Monitore am Original sind.

Lieferumfang

2 Kaltgeräteleitungen, 8 Gummiklebepads, ein deutsch- und ein englischsprachiges Handbuch sowie 2 Frontgitter liegen den beiden Monitoren bei.

Verarbeitung und Optik

Das Furnier hat ein sattes Schwarz und sieht einfach toll aus. Die Rückseite hat kein Furnier, sondern ist mattschwarz lackiert. Beim rechten Monitor ist die Sicke des Tiefmitteltöner leider nicht exakt am Korb zentriert. Das hat aber keine messtechnische oder klangliche Auswirkungen, weswegen ich darüber hinwegsehe. Optisch fällt es auch nicht weiter auf.

Schallwand

Linker und rechter Monitor unterscheiden sich anhand der asymmetrisch angeordneten Hochtöner. Diesen fehlt der graue Filzring, welcher sich bei der „NS10M Studio“ hinter den Schutzgittern befindet. Bei den „NS10M“ fehlt der Ring normalerweise. Die Schutzgitter sind aus Metall, schwarz lackiert und auch sonst sauber gearbeitet.
Die Membranen der Tiefmitteltöner sind aus weißem Papier gefertigt und leicht gelblich. Genauso auch die Staubkappe im Zentrum der Konen. Die Staubkappen ziert ein unregelmäßiger gezeichneter schwarzer Farbring. An den Membranen befinden sich wenige kleine schwarze Schmutzpartikel. Diese ließen sich nicht so einfach abkratzen. Vielleicht wurde es absichtlich so gefertigt, um gut erhaltenen Originalen optisch nahezukommen.

Die Ausfräsungen für Hochtöner und Endstufenmodul sind genau. Diese sind dann ca. 0,5 mm versenkt in das Gehäuse eingelassen. Der Tiefmitteltöner liegt auf der Schallwand auf. Die „NT10a“ hat wie das Original eine geschlossene Gehäusekonstruktion. Das ermöglicht eine sehr gute Impulstreue. Der Nachteil dieser Konstruktion ist die selbst bei mittelgroßen Gehäusen schwache Tiefbasswiedergabe, und so auch hier.

Die Rahmen der Frontgitter sind stabil und die schwarzen Stoffbespannungen sind fehlerfrei. Die Befestigungshülsen sowie die mitgelieferten Frontgitter sind auch bei der „NS10M“ vorhanden, jedoch nicht bei der „NS10M Studio“. Die Chassis sind mit je vier schwarzen Inbusschrauben befestigt, was optisch eher der „NS10M Studio“ entspricht.

Rückseite

Auf der Rückseite eingelassen ist das Endstufenmodul mit Cinch-, XLR- 6,3 mm Klinken- und Kaltgerätebuchse sowie Kippschalter mit nebenliegender Status-LED. Weiterhin befinden sich auf dem Modul drei DIP-Schalter und ein Drehregler für Klanganpassungen sowie ein Drehregler für die Lautstärkeregelung. Die beiden Drehregler für „MF“ und „Volume“ rasten an der Mittelposition (12 Uhr) ein. Die Cinch-, Klinken- und Kaltgerätestecker werden stabil gehalten. Der XLR-Stecker sitzt leider etwas wackelig. Der Kippschalter dient zum Ein- oder Ausschalten und macht einen soliden Eindruck.

Endstufe

Nach dem Einschalten befindet sich der Monitor im Stand-by-Modus. Signalisiert wird der Betriebsmodus durch eine zweifarbige Status-LED. Rot steht für Stand-by und Blau für Aktiv. Ein störendes Grundrauschen konnte ich nicht feststellen. Der Stand-by-Modus funktioniert so weit ok, jedoch dauert es ca. 3 Sekunden nach Gabe des Musiksignals, bis die Musik zu hören ist. Beim Aktivieren und Deaktivieren der Endstufe wird ein leises „Klack“ hörbar.

Messung

Leider besaß ich die Originale nie, sodass ich keinen wirklichen Hörvergleich liefern kann. Jedoch verfüge ich über entsprechendes Messequipment und einige Erfahrung beim Einmessen von Lautsprechersystemen. Also hab ich die "Swissonic NT10a" durchgemessen und sie mit dem Frequenzgang der Originale verglichen. Ich muss sagen, dass dieser ziemlich genau dem der Vorbilder entspricht, wenn man den MF-Regler noch etwas runter regelt.

Angleichung an NS10M Frequenzgang

„Low freq“ und „High freq“ auf 0 dB, „Low cutoff“ auf 56 Hz, und den „MF“ dreht ihr auf 9 Uhr Perfekt! Über die Serienstreuung der Originale und der „Swissonic NT10a“ kann ich aber keine Aussagen treffen.

Auf Youtube gibt es ein interessantes Vergleichsvideo der „Swissonic NT10a“ mit dem Original, bei dem der Mittenregler „MF“ auf Minimum gedreht wurde.

Das sollte auf keinen Fall getan werden. Der Regler arbeitet nämlich nicht linear und das wichtige Mittenband wird dann plötzlich recht schmalbandig bei 1,85 kHz um ca. 9 dB gegenüber der Mittelstellung (12 Uhr) abgesenkt, denn der letzte Bereich von 8 bis 7 Uhr (Min) regelt um einiges stärker ab als die Bereiche davor.

Klang

Das Klangbild der Monitore ist sehr mitten betont, auf keinen Fall Hi-Fi-mäßig. Tiefbass ist nicht vorhanden. Wer Hi-Fi sucht, kann den Frequenzgang mithilfe der rückseitigen Schalter und Regler noch etwas verbiegen, das ist hier aber eigentlich nicht sinnvoll. Die „NT10a“ klingen eben genauso wie sie sollen. Sie sind wie das Vorbild eher ein Werkzeug, kein Genussmittel. Trotzdem kann man gefallen am Klang finden.

Sie können aber auch laut. Hierbei macht sich der typisch überhöhte obere Mittenbereich bemerkbar. Auch die Höhen werden nun aggressiver. Die Bässe treten jetzt noch weiter nach hinten. Man kann das aber etwas kompensieren, indem man den „Low freq“ auf +2 dB, den „MF“ auf 8 Uhr und den „High freq“ auf -2 dB stellt.

Sehr positiv finde ich, dass man beim Mischen leise hören kann und sich der Mix trotzdem gut beurteilen lässt. Sie klingen dann auch etwas mehr in Richtung Hi-Fi und die Ohren danken es ebenfalls.

Wenn man sich professionelle Musikproduktionen aus vergangen und aktuellen Zeiten über die Monitore anhört, dann klingen die Aufnahmen recht ordentlich, aber jede ein bisschen anders. Man kann also unterschiedliche klangliche Abstimmungen der Aufnahmen gut heraushören. Nur bei den eigenen Produktionen wollen die Aufnahmen ab und zu nicht so gut klingen, da hört man die Schwächen der Mixe ganz gut heraus.

Fazit

Die „Swissonic NT10a“ werden von mir wie vorgesehen eingesetzt. Sie klingen genauso wie sie sollen. Das Preis-Leistungs-Verhältnis finde ich erstaunlich gut. Man bekommt viel Monitor fürs Geld, mit nur leichten Schwächen. Optisch und messtechnisch entsprechen sie der „NS10M“ nur ohne Herstellerschriftzug und Typenbezeichnung. Selbst die Alterung der weißen Papiermembranen scheint optisch nachgeahmt zu werden. Wie nah sie klanglich an die Originale heranreichen, kann ich mangels direktem Hörvergleich nicht beurteilen.
features
quality
sound
14
0
Report

Report