Tech 21 QStrip

26

Channel Strip/Preamp

  • High-quality channel strip/preamp for acoustic instruments or bass
  • 3 Different operation modes
  • The high-impedance input handles piezo and low-impedance signals equally well
  • The XLR output can drive power amplifiers and can be attenuated by 20 dB, for example, to be connected to micro inputs on a mixing console.
  • The jack output can be boosted by 10 dB to drive power amplifiers or tube amps.
  • Phantom power via XLR
  • Controls for volume, low, mid 1, mid 2, high, shift 1, shift 2
  • Input: 6.3 mm jack
  • Output: 6.3 mm jack or XLR with phantom powering
  • HPF suppresses unwanted frequencies that occur with direct connection
  • LPF can be used as a speaker simulation
  • Power supply via 9 V battery or mains adapter (both not included)
  • Robust metal housing.
  • Suitable power supply: Tech 21 Model #DC4 (not included)
Available since September 2017
Item number 421651
Sales Unit 1 piece(s)
Design Floor Effects Pedal
Tubes No
Amp Modeling No
Integrated Effects No
Headphone Output No
Direct Out Yes
MIDI Connector(s) No
Integrated Expression Pedal No
Connections for Pedals or Switches No
Aux Input No
Integrated Tuner No
USB Connection No
Effect Types Preamp
$333
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

26 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

handling

sound

quality

19 Reviews

v
Really secret sound weapon!
vitaliistep 03.07.2018
I love this box, it's extremely versatile and musically sounding!
The knobs are precise and smooth, but without snap to the middle position. Anyway it sounds quite neutral with knobs at about a noon position and this is good.

Build quality is decent, but not perfect: XLR output is a bit misaligned, soldering quality is average, internal board is thin and a bit bent. And I think it's a shame for such price!

Strange manufacturer decision that when you power-on pedal it's always in the ON-state, so it doesn't remember its last state before power-off. According to the support it's normal behavior and you can switch it to default ON or OFF-state by re-soldering some elements on the circuit board! I don't think it's quite elegant and intuitive solution :) Also ground lift is cable dependent: if your cable has
ground pin connected with shield of the plug (I think most of them does), you can't use ground lift and this is also normal behavior according to the manufacturer support :)

But sound and feature-wise it's very good, especially it shines when you feed it with a bit hotter input signal allowing MOSFET elements to add a bit of tube-like saturation.
features
sound
quality
handling
1
0
Report

Report

X
A real parametric equalization in a (quite) small box
Xander502 27.08.2022
This little box - busy looking on most sides - is very competent at what it says to deliver : a vintage inspired but accurate true parametric equalization which some creature comforts.

The equalization part is, in a few words, excellent. The ranges for low-mid (40Hz-700Hz) and high-mid (300Hz-6kHz) frequency selection are totally usable. Did not measured the +/-18dB with precision tools, but seem accurate. The manual gives quite a few propositions for settings regarding if you intent using it as an equalizer or en effect, but gut feeling is not restricted as an option. HPF and LPF are useful whether you need to clean a bit of ramble or, again, use them as an effect.

The cost of this product is mainly because of the fact this is a analog pedal, which requires quite another level of engineering. The size for value proposition is pretty good in that regard.

The fact this little box can be used like a D.I. with phantom power may not be useful to everyone but can come in handy, especially for bass players who uses it as a cab sim. Early in your chain, the parallel output can be used for your tuner or as a secondary chain, if you are creative.

Construction wise, the box is your standard aluminum box, but the knurled metal buttons give a premium felling when making changes to your configuration.

Of course, if you need a simple equalization box for low-fi effects or such, this is overkill in every way. But if you need a sim cab with precise equalization in a small box, or need to tinkle precisely your mids to make your drive pedal to the edge, it's a solid choice. Bonus points for the color, which stands out on any pedal board (yes, it can be important at times :) ). I used it with a variety of instruments (basses, guitars, cellos, keyboards) and never been disappointed.
features
sound
quality
handling
3
0
Report

Report

H
Expensive, but great if it meets your personal, specific needs.
HalfManHalfGear 16.03.2021
Usual Tech21 high quality build and sound. I wanted to use this as a bass preamp but found it less useful than I was hoping. The eq section is huge, but in reality the higher mids parametric did nothing over the last half of its sweep on bass guitar. The pedal is larger than other preamps like those from MXR (M81) and the volume knob doesn't go down to zero (mute) either. Used as a speaker emulator with the HPF and LPF switches engaged I found it impossible to achieve a sound as good as the Tech21 Blonde Character pedal or the Tech21 VT Bass DI. At the price I was expecting something more so have decided to continue using my MXR M81. Thomann's return policy and customer service was the usual platinum standard.
features
sound
quality
handling
1
5
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
B
Vielseitige DI-Box/Equalizer
BMay 09.10.2020
Ursprünglich hatte ich mir den QStrip nur für zwei Sachen zugelegt.
Einmal um bei kleineren oder kürzeren Auftritten, sowie bei Proben auswärts eine kompakte Lösung für den E-Bass parat zu haben, die man gleich im Instrumentenkoffer mit dabei hat.
Der andere beabsichtigte Zweck war, dass ich damit meine größeren Akustik-Preamp-Boards mit Effektloop und anderen Extras ebenfalls bei kleineren Auftritten nicht mitnehmen brauche, vor allem, wenn es auf der Bühne nur unter größerem zusätzlichem Aufwand Strom gibt.

Darüber hinaus habe ich es mittlerweile auch für die Kalimba und den E-Kontrabass benutzt und bei all den Instrumenten war der QStrip gut brauchbar.

Zur Vielseitigkeit tragen auch die drei Arten der Stromversorgung bei.
Über ein 9V DC-Netzteil, 9V Batterie oder Phantomspeisung über XLR.
Da ich Batterien zur Stromversorgung nicht sonderlich mag, ist die Option, den QStrip einfach über das Mischpult mit Strom versorgen zu können, wirklich praktisch und einfach.

Manchmal nehme ich es auch zu Auftritten mit, bei denen ich es selbst garnicht brauche. Hin und wieder kann man seinen Mitmusikern damit dann aber unter die Arme greifen, wenn mal ein anderes Gerät den Geist aufgibt.

Die Sample Settings im Handbuch sind übrigens vor allem bei den Bässen garnicht mal so schlecht, um einen Ausgangspunkt zu finden. Und selbst dann interessant mal anzuhören, wenn man es vom Arbeiten am Mischpult gewohnt ist den passenden Sound ganz selbstständig einzustellen.

Die Möglichkeit für den XLR-Out und den Klinke-Out den Pegel zusätzlich noch über einen Schalter an das nachfolgende Gerät anzupassen, ist auch ganz praktisch. Auch wenn die Instrumente am Eingang zu Extremen neigen, was den Pegel betrifft.

Verglichen mit anderen DI-Preamps und kompletten Verstärkern, die spezifisch auf eine bestimmte Instrumentengruppe abgestimmt sind, ist der QStrip meiner Meinung nach aber klanglich im Nachteil.
Beispielsweise bekomme ich Akustikgitarren an meinen Mesa Rosette DI-Preamps immer besser eingestellt als am QStrip.
Dafür kann man aber mit dem QStrip sehr viele verschiedene Instrumente bewältigen. Ein Gerät zu haben, das eben genau in dieser Vielfalt stets ein gutes Ergebnis liefern kann, ist auch etwas wert.

Zum Aufnehmen würde ich den QStrip selbst nicht einsetzen, da ich hier mehr auf spezifischere Lösungen setze, doch wenn jemand mit dem QStrip genau seinen Sound findet, dann spricht da grundsätzlich auch nichts dagegen.

Von der Verabreitung her gibt es nichts zu meckern. Nur finde ich, dass sich die Rillen der Potiknöpfe irgendwie seltsam anfühlen, weil sie sehr kantig gefräßt sind. Dafür sind sie kräftig rot und aus Metall.

Zusammenfassend kann ich nur wiederholen, dass ich den QStrip sehr für seine Flexibilität schätze, was ihn besonders bei Liveanwendungen so unproblematisch macht.
features
sound
quality
handling
2
0
Report

Report

YouTube on this topic