Thon Case BM AME/-ISO 5U

5

Angle Case

  • Suitable for Blackmagic Design Atem Mini Extreme and Blackmagic Design ATEM Mini Extreme ISO
  • Fixed to wooden plate with hook-and-loop straps
  • Hand rest made of foam
  • 19" Monitor can be screwed into hinged lid
  • Material: 6.8 mm coated plywood
  • 25 x 25 mm Aluminium edges
  • 4 Medium butterfly latches
  • 1 Mini Butterly latch
  • 5 Medium folding handles
  • 8 Medium ball corners
  • Hinges
  • 4 Rubber feet 38 x 20 mm
  • Foam padding
  • 5.5 U behind controller for free access
  • Front cover hinged and with service door for monitor cabling
  • Removable rear cover
  • External dimensions (W x D x H): Approximately 555 x 784 x 288 mm
  • Weight: Approximately 14.6 kg
  • Colour: Black
  • Made in Germany
Available since July 2021
Item number 524481
Sales Unit 1 piece(s)
Construction Type Special
Material Multiplex
Colour Black
Weight 14,6 kg
$499
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

5 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

quality

3 Reviews

google translate se
Unfortunately there was an error. Please try again later.
S
Great case design!
Sargaroth 21.01.2022
I purchased this case for an Atem Mini Extreme, a screen, a Mac Mini and my X32 Rack as an allround broadcasting station and it does everything well. Mine was ordered with 10 mm plywood, which I really recommend, and was very stable.

The powerful air springs that keep the case lid from falling down are good quality and definitely sized to carry the load without issue.

If you already have a display that you're happy with and fits the inner dimensions of this case as well as access to a 3D printer, I chose to model mounts that could attach a conventional display to the rack rails. These are available online for free and can be found by searching for "Thon Case BM AME/-ISO 5U Display Mount".

My only negative feedback regarding this case is that it is possible to accidentally close the display lid assymetrically due to the air springs and thereby not aligning the aluminium profiles, but that is easily handled by paying attention while closing the lid. That's literally the only caution I could give. Amazing product.
stability
quality
0
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
G
Propre et indispensable , à voir sur la longueur
GuillaumeKaz 06.09.2022
Reçu récemment, la construction est propre, un peu lourd. J’attends l’utilisation en prestation.
Pas beaucoup d’espace à l’intérieur pour des appareils profond et une petite grille d’aération serait vraiment appréciable pour évacuer.
Le couvercle a l’air solide mais faire attention en refermant pour ne pas décaler les vérins
stability
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
BS
Gute Idee mit "günstiger" Umsetzung
B. Stein 06.05.2023
Das Case ist super für den Einsatz vorbereitet und bietet genug Platz auch für entsprechende Anschlusshardware. Der vorbereitete Klett für das Atem Extreme passt, lässt aber keinen Spielraum für alternative Montage z.B. in Kombination mit einem Streamdeck

Es gibt leoder 2 Punkte in der Verarbeitung die uns negativ aufgefallen sind.

A) der Deckel schließt leider zum Teil ungleichmäßig. Durch die Verkeilung gibt es Probleme beim verschließen. Für den Preis hätte ich mir etwas Höherwertigen erwartet.
B) beim Vernieten der Revisionsklappe sind wohl die Nieten stark durch das Holz gegangen. Da diese hoffentlich nur selten genutzt wird passt das hoffentlich

Es ist außerdem etwas schwer, das ist aber wohl der Stabilität geschuldet.
stability
quality
0
0
Report

Report