Kramer PA-240Z 240W Power Amplifier

Power Amplifier

  • 1 x 240 W @ 70 V / 100 V
  • 2 x 120 W @ 4 / 8 Ohm
  • With balanced and unbalanced inputs and line level output
  • 2 Inputs with individual reinforcement
  • Each output supports independent input mixing with master volume, 3-band parametric EQ and selectable high-pass filter
  • Controllable via RS-232 and IP
  • Integrated DSP
  • Incl. power cable

Technical data:

  • Inputs: 1 x unbalanced stereo with 3.5 mm jack, 1 x balanced stereo +4 dBu/10 kO with 5-pole terminal block
  • Outputs: 1 x balanced stereo line level with 5-pole terminal block, 1 x stereo or 1 x mono speaker output with 4-pole large terminal block
  • Input sensitivity: Reaches full power at 0.3 V (-10 dBV)
  • Output power: 2x 120 W @4 ohms or 8 ohms or 1 x 240 W @70 V or 100 V
  • Amplifier type: Class D
  • Max. voltage gain: 26 dB SE/32 dB BTL
  • Dynamic range: 119 dB
  • Frequency range: 20 to 20000 Hz @ +/-1 dB
  • Signal to noise ratio: 80 dB - 10 dBV, 20 to 20,000 Hz
  • Control: Screw trimmer as gain attenuator
  • IP and RS-232
  • Audio THD+noise: 0.003 % (1,000 Hz @ 1 W)
  • Audio 2 harmonic: 0.08 % @75 W RMS @ 4 ohms, 6670 Hz
  • Power supply: Universal mains 85 to 265 VAC (full power at 120 to 230 V)
  • Overall efficiency: 89.5 %.
  • Dimensions: 21.5 x 16.3 x 4.4 cm
  • Weight: 0.9 kg
Channels 2
Output power at 100 V 240 W
Rack Units 1 U
DSP/Frequency Yes
Convection cooling No
available since January 2022
Item number 529006
sales unit 1 piece(s)
Output power at 4 Ohms / Cannel 120 W
Class Class D
Input 6,3 mm Jack unsym. 1
Link Out No
Output Speaker Twist 1
Output Phönix clamps 1
Temperature controlled fan 1
Width 215 mm
Hight 44 mm
Show more
$945
The shipping costs are calculated on the checkout page.
In stock
In stock

This item is in stock and can be dispatched immediately.

Standard Delivery Times
1