C
A little large but does what I want it to do
Obviously, one of the best ways to reduce feedback is to try and position the speakers and mics in an appropriate way, but I found that this isn't always possible.
An example is when there is no room (or urge) for monitors and the lead singer turns a PA speaker inwards slightly so he can hear himself sing. With that in mind, I decided to give the FBQ 2496 a go in order to try and get a bit more volume.
I've used it about 5 times now and this has resulted in increased volume and reduced feedback. Perhaps coincidentally, the response from the audience has also improved over this period.
I do find that all the channels get used up during the show even though I haven't heard any feedback. I can only assume it is picking up other sounds and interpreting them as feedback, but whatever the reason, it's definitely an improvement.
The device itself is quite large for this day and age; I'm sure if it was redesigned today, it would be 1/4 the size. So when we're in a venue, I have to find a large table to accomodate both it and the mixer, although I've also sat the mixer on top of it if necessary. It's not heavy though.
I've only used the feedback destroyer features, not the EQ features (I don't think the EQ side of things is very user friendly). For the Feedback destroyer features, it's simple to use; first I clear the values from the previous venue and then it's ready to use for the current venue. I get everything set up at a fairly low volume and then gradually increase the mixer volume until feedback occurs; the FBQ 2496 sometimes takes 2 or 3 seconds to catch the feedback which can be a little annoying to any customers that are already there. But eventually, I can get the volume as high as I need. I tried the automatic setup at home but, after nearly blowing my speakers and hearing, I decided I wouldn't attempt it in front of an audience.
I recommend a case or bag to protect it as it doesn't seem too sturdy; I managed to adapt my mixer case to fit it in.
Overall, I'm pleased with it and it achieves its purpose. I don't know whether it affects the overall sound quality, but we've only had positive feedback from the audiences since using it.
I recommend it for situations where you can't eliminate feedback by normal means.
An example is when there is no room (or urge) for monitors and the lead singer turns a PA speaker inwards slightly so he can hear himself sing. With that in mind, I decided to give the FBQ 2496 a go in order to try and get a bit more volume.
I've used it about 5 times now and this has resulted in increased volume and reduced feedback. Perhaps coincidentally, the response from the audience has also improved over this period.
I do find that all the channels get used up during the show even though I haven't heard any feedback. I can only assume it is picking up other sounds and interpreting them as feedback, but whatever the reason, it's definitely an improvement.
The device itself is quite large for this day and age; I'm sure if it was redesigned today, it would be 1/4 the size. So when we're in a venue, I have to find a large table to accomodate both it and the mixer, although I've also sat the mixer on top of it if necessary. It's not heavy though.
I've only used the feedback destroyer features, not the EQ features (I don't think the EQ side of things is very user friendly). For the Feedback destroyer features, it's simple to use; first I clear the values from the previous venue and then it's ready to use for the current venue. I get everything set up at a fairly low volume and then gradually increase the mixer volume until feedback occurs; the FBQ 2496 sometimes takes 2 or 3 seconds to catch the feedback which can be a little annoying to any customers that are already there. But eventually, I can get the volume as high as I need. I tried the automatic setup at home but, after nearly blowing my speakers and hearing, I decided I wouldn't attempt it in front of an audience.
I recommend a case or bag to protect it as it doesn't seem too sturdy; I managed to adapt my mixer case to fit it in.
Overall, I'm pleased with it and it achieves its purpose. I don't know whether it affects the overall sound quality, but we've only had positive feedback from the audiences since using it.
I recommend it for situations where you can't eliminate feedback by normal means.
12
0
Report
A
Think of this as insurance!
If you get your levels and mix right, you can usually avoid feedback. But the dynamics of a gig can change and this piece of kit is there to keep your sound clean.
Especially helpful if, like me, your the sound engineer and playing at the same time.
What I really like about this Feedback Destroyer is while it's very configurable, it can also just get on with the job with minimal setting up.
I set mine up to automatically notch out any feedback frequencies before they're audible, then drop the notch after a minute or more, with two channels working independently.
Have bought a couple of these now and have recommended them to a number of friends in other bands.
Especially helpful if, like me, your the sound engineer and playing at the same time.
What I really like about this Feedback Destroyer is while it's very configurable, it can also just get on with the job with minimal setting up.
I set mine up to automatically notch out any feedback frequencies before they're audible, then drop the notch after a minute or more, with two channels working independently.
Have bought a couple of these now and have recommended them to a number of friends in other bands.
2
0
Report
A
Delivers
If the room is acoustically treated, and you control the amount of sound coming out of the speakers, you will get great results using this unit.
1
0
Report
JV
I find it overly complicated, but hey. It works I guess.
As for build quality: I don't know how it will age, but it seems one of Behringer's best (or should I say least bad) products in that regard.
As for build quality: I don't know how it will age, but it seems one of Behringer's best (or should I say least bad) products in that regard.
0
0
Report
A
Great design and functionality
This device really does what it should do. I am very satisfied with the control panel and all features build in it. Only thing that confused our staff little bit is Saving and Deleting presents in the internal memory. The measuring tool is really helpful and responsive!
0
0
Report
CA
Confusing
I bought this thinking another model I had was faulty.
These things might be okay in some situations. For one instrument for example. For a live band these is too much other noises going on and it seems to just pull the life out of your performance. If you play ridiculously loud rock music maybe you like this to get more volume. If your music has subtle nuances then this thing can ruin the performance. You get a false idea of what's happening, it keeps cutting frequencies. If you have time to read the confusing manual and an hour to test the sound in every venue you play in maybe you can use it better than me. I found it disappointing.
These things might be okay in some situations. For one instrument for example. For a live band these is too much other noises going on and it seems to just pull the life out of your performance. If you play ridiculously loud rock music maybe you like this to get more volume. If your music has subtle nuances then this thing can ruin the performance. You get a false idea of what's happening, it keeps cutting frequencies. If you have time to read the confusing manual and an hour to test the sound in every venue you play in maybe you can use it better than me. I found it disappointing.
0
0
Report
