Cioks DC10

Multi Power Supply

  • Professional power adapter
  • 10 outputs configured in 8 galvanically isolated sections
  • 1600 mA
  • Short circuit protection on all outputs
  • LED's for all outputs
  • Temperature display
  • 3 x Outputs with 400 mA
  • 2 m Connector cable
  • Dimensions: 158 x 98 x 35 mm (without rubber feet)
  • Weight: 1.1 kg
  • Including 16 x flex cables and mounting kit for pedal boards

Configuration:

  • Output 1 - 4: 9 V DC / 100 mA
  • Output 5 + 6: 9 V DC / 200 mA
  • Output 7 + 8: 9 - 12 V DC / 400 mA
  • Output 9 + 10: 9 - 12 / 15 V DC / 400 mA

Further Information

DC/AC current DC
Output current in mA 1600 mA
9 V Yes
12 V Yes
18 V No
Secondary voltage No
Multi-output power supply Yes

Come up with your own creative bundle and save

If you order this product together with others as part of a bundle, you can save up to 5 % additionally!
Pedaltrain Novo 32 SC + Harley Benton Mounties + Cioks DC10 +
8 more
Configure bundle now
starting from $345
187 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.9 /5
  • quality
Total
quality
The most versatile power supply
Arpie, 19.11.2015
It was a big concern to me what kind of power supply should I buy to feed all my pedals.

I have quite a lot of pedals in my pedalboard with different voltage & ampere requirement.

Just to give you a short insight, I have:
Morley Bad Horsie 2 Wah pedal, Sony DWZ wireless unit, Korg DT-10 tuner, Boss NS-2, Ibanez TS-9, DOD 250, TC Nova repeater, ADA midi switch, Decibel 11 Loop expander, Lehle SGoS, MXR EVH Phase 90, Hotone Reverb.

Couple of pedals needed relatively a huge 300mA supply, others needed a 12V. This situation obviously made the decision more difficult.

After checking literally everything on the market from T-Rex, Voodoo Lab, Carl Martin, Cioks, Dunlop.....I figured out that the best option for me would be the Cioks DC-10.

I must say I didn't regret my decision at all. Very robust unit, indestructible, 10 outlets in 8 isolated section, supplied with plenty of cables.
The only negative thing I can mention is that Cioks uses a RCA plug to connect the cables to the power unit, the normal typical DC plug would be more convenient. But as they put enough cable in the box I can't complain at all.

After connecting everything I realised that the annoying noise and hiss are gone.
The unit is small, easy to fit to any pedalboard, very well made, you can immediately feel the quality as soon as you hold it in your hand.

I really prefer that it has a proper main cable instead of an adapter.

Another useful feature: if something is wrong with any of the outlet (short circuit, incorrect voltage) the relevant red LED with blink accordingly to let you know the problem.

Well worth every penny!!!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Cioks DC10
Donal F., 21.05.2015
I purchased this power supply as it can power my 15 volt Radial pedal, my 12 volt eventide H9 and still power another 6 x 9 volt pedals and can even double up 2 of the 9 volt outputs to power an 18 volt pedal. Extremely versatile and excellent build quality. Very flat footprint so easily fitted under a pedaltrain. All leads and adapters came with the unit also.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Reliable Power Supply
an aspiring musician friend, 28.04.2021
Cioks is a company that does not have 1000 types of products. They are a company specialized in making power supplies and because of this they provide really high quality, build like tanks, products.

I use Cioks DC10 to power a Carl Martin Octa-Switch which requires 400mA and 7 other pedals with various consumptions. Never had any problem powering them!

You can fill the build quality when you hold it in your hands and because of this, it is quite heavy and therefore an extra weight you need to consider when you design your pedalboard.

Having a toroidal transformer, it significantly lowers the noise you might encounter when powering lots of pedals together.

Recommend it 100%.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
I'm in love
12.05.2016
When I first held it, it felt heavy. That was good.
Then I unboxed it, and wow... the finish is amazing, the overall build is extremely professional, built like a tank - would probably survive one too...
The options are endless, you can power a massive board with this box, variable voltage, combine or isolate outputs, etc.. you name it.
It's so silent... no noise, great quality.
Two things to note:
1. If you planned to reuse flex cables from other power supplies, this uses RCA to connect, so forget it
2. There is only one daisy chain cable (with 2 outputs) so if you plan to do more chains, get the additional cables right away
Love it really, this will be a keeper and hope will last me a lifetime
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$219
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.
1
(1)
Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

2
(2)
Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

Recently Viewed
Harley Benton TableAmp V2 BlueTooth

Harley Benton TableAmp V2 BlueTooth, compact amplifier with great features for play-along and sing-along with streamed music using the integrated Bluetooth feature, ideal for acoustic guitar, ukulele, electric guitar, vocals and music, 30 watt RMS, 1x 5" bass woofer +…

Recently Viewed
Chapman Guitars ML1 Modern Baritone Red Sea

Electric Guitar Body: Alder, Top: Flamed maple veneer, Neck: Maple, Fretboard: Ebony with dot inlays, Nut width: 42 mm, Radius: 350 mm, Frets: 24, Scale: 711 mm (28"), Pickup system: Chapman Sonorous Zero Baritone humbucker, Controls: 1 Master volume,…

1
(1)
Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Recently Viewed
SSL 500-Series SiX Channel

Solid State Logic 500-Series SiX Channel; Channel Strip; with SuperAnalogue mic preamp and 5-way LED indicator; +48V phantom power; with phase and HPF switches; separate instrument/line input on front panel with Hi-Z switch (1MO); switchable 2-band EQ with bell and…

1
(1)
Recently Viewed
Korg SQ-64

Polyphonic Step Sequencer with 4 Tracks 3 Melody tracks with 8-fold polyphony and 16 patterns of 64 steps each, Drum track with 16 monophonic sub-tracks, 64-Key matrix with illuminated buttons, OLED display, Editing modes per melody track: gate, pitch…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

Recently Viewed
Lewitt LCT 140 Air Matched Pair

Lewitt LCT 140 Air Matched Pair - 2 matched small diaphragm condenser microphones, polar pattern: cardioid, frequency range: 20 Hz - 20 kHz, sensitivity: 14.6 mV/Pa, -36.7 dBV/P, max. SPL: 135 dB, low-cut: 80 Hz (12 dB/oct), pad switch: -12dB,…

Recently Viewed
Rode VideoMic Me-C

Rode VideoMic Me-C; condenser directional microphone; suitable for Android devices with USB-C connector; integrated USB type-C plug; 1/2" condenser capsule; polar pattern: cardioid; front pickup angle: 90°; sturdy aluminium housing with ceramic coating; built-in microphone preamplifier with DA converter (24Bit…

Recently Viewed
IK Multimedia UNO Synth Pro Desktop

Analog synthesizer Paraphonic analog synthesizer with step sequencer, arpeggiator and effects section, Three wave morphing oscillators with PWM, sync, frequency and ring modulation, dual state variable filter with 24 modes, amplifier, Original OTA filter from the UNO Synth as…

Recently Viewed
Sennheiser MKE 400 MKII

Sennheiser MKE 400 MKII - condenser camera microphone, polar pattern: supercardioid, integrated windscreen, internal suspension, frequency response: 50 Hz - 20 kHz, switchable sensitivity: -23 / -42 / -63 dBV / Pa, max. SPL 132 dB SPL, 2 - 10V…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.