G
Rubbish
The product is designed wrong. In the bottom there is a metal thread that is glued into plastic. When you tighten the item onto your stand the thread is not deep enough and causes the metal insert to become loose. My monitor smashed on the floor and broke. This is a terrible item don't buy it.
2
1
Report
J
Poor Quality
The metal push fit section of the adaptor is not secure - first time I mounted the monitor, the plastic section separated from the screw thread and the monitor fell off. I bought 2 of these - both the same. It's quite soft plastic so it will only get worse. Putting the two parts back together just weakens the connection and shreds the plastic inner grooves meaning each refit is loose than the previous one. This product is not fit for purpose. The Mackie version is a higher quality and solid as a rock. Unfortunately they're hard to get hold of. Behringer used to include this adaptor WITH the monitor but now you have to source from a third party seller. Not good.
2
1
Report
TR
Dreadful - but can be improved !
I'm a fan of Thomann, but the design and construction of this piece is frankly ridiculous ! As others have pointed out, the 5/8 female threaded ring is just lightly pressed into the plastic part, so it pulls out easily - potentially causing your beloved personal monitor to crash to the floor. There's also nowhere near enough thread.
However, alternatives are hard to come by, so for a bit of effort it can be improved. I used a 5/8-F to 1/4-M adaptor and extended this with a piece of 6mm brass tubing, reamed out to 1/4-20 and screwed tightly to the adaptor (with thread-lock). I then pressed this piece into the plastic part, packing this first with epoxy so it won't pull out.
Ridiculous to have to do this, but I think it will hold !
However, alternatives are hard to come by, so for a bit of effort it can be improved. I used a 5/8-F to 1/4-M adaptor and extended this with a piece of 6mm brass tubing, reamed out to 1/4-20 and screwed tightly to the adaptor (with thread-lock). I then pressed this piece into the plastic part, packing this first with epoxy so it won't pull out.
Ridiculous to have to do this, but I think it will hold !
2
0
Report
JD
Definitely add this
If you're buying the Behringer B105D or the FG CL105A I would definitely add this to your order. Lifting the monitor off the ground and attaching it to a mic stand really brings out the acoustics and power. An inexpensive way to help your sound
0
1
Report
B
Very Poor Product
I received this unit and the metal screw insert pulled out of the plastic whilst I was screwing in the adapter. Very disappointing. I realised on examination that the metal insert is only about 6mm in depth - totally inadequate for supporting a small speaker which is what it is intended for. I would suggest avoiding this item.
1
0
Report
AS
Rubbish
This broke the first time we used it.
1
0
Report
