CC
Be careful..
I would normally put 3 stars because it cannot be used with the Harley Benton Junior power supply.
So I had to put the power supply on the actual pedalboard together with the other pedals and this seems quite unprofessional.
HOWEVER, I am a realistic person and to expect everything to be perfect from the cheapest pedalboard around, would be false expectations.
Summary:
+Cheap
+Sturdy
+Cute
+Can fit 4-5 normal size pedals easily.
+In the package, it has some screws which you can use and make the Pedalboard higher. (still not high enough for the Harley Benton Junior Supply)
Cons:
-Be careful on the power supply that you choose. Check the "height" from each piece and make sure the one you choose can fit under the pedalboard.
All in all, value for money pedalboard, small size, compact and you should go ahead if you have >5 pedals to use.
So I had to put the power supply on the actual pedalboard together with the other pedals and this seems quite unprofessional.
HOWEVER, I am a realistic person and to expect everything to be perfect from the cheapest pedalboard around, would be false expectations.
Summary:
+Cheap
+Sturdy
+Cute
+Can fit 4-5 normal size pedals easily.
+In the package, it has some screws which you can use and make the Pedalboard higher. (still not high enough for the Harley Benton Junior Supply)
Cons:
-Be careful on the power supply that you choose. Check the "height" from each piece and make sure the one you choose can fit under the pedalboard.
All in all, value for money pedalboard, small size, compact and you should go ahead if you have >5 pedals to use.
10
2
Report
a
Check out my full review and board build on YouTube: board is surprisingly light and comes with Velcro attached and ready to use. The bag is really practical for carrying it. I have seen comments saying that the bag is not well padded, but I disagree on that and I feel my pedals are well protected for urban transportation. EDIT: last week my band-mate dropped it from a table and all pedals survived intact. The additional pocket is perfect for carrying some cables and other stuff. As weird as this sounds, I also enjoyed that the product smells good (new car kind of smell) and, as unimportant as this is, it was a nice surprise at this price tag.
One could fit 5-6 boss-sized pedals in this board and even more using mini-pedals and flat patch cables. I have placed a Fulltone '69 Fuzz and OCD, HB CPT-20 tuner, MXR dyna-comp mini, Phase 95 (mini), Carbon Copy Delay and Danelectro Filthy Rich Tremolo using the Power Plant ISO-2 Pro as power supply after small mods.
Modifying the board to accommodate the Power Plant ISO-2 Pro power supply: youtu.be/h8Lkg5a4ahg
One could fit 5-6 boss-sized pedals in this board and even more using mini-pedals and flat patch cables. I have placed a Fulltone '69 Fuzz and OCD, HB CPT-20 tuner, MXR dyna-comp mini, Phase 95 (mini), Carbon Copy Delay and Danelectro Filthy Rich Tremolo using the Power Plant ISO-2 Pro as power supply after small mods.
Modifying the board to accommodate the Power Plant ISO-2 Pro power supply: youtu.be/h8Lkg5a4ahg
10
0
Report
I
Great value
It's very sturdy and well-built. I was able to fit 5 pedals comfortably with no issue and I could squeeze 6 in there if I wanted to. The power supply installation underneath was also effortless. It's great for the price.
2
1
Report
a
Väldigt bra!
Jag hade bestämt mig att köpa mitt första riktiga pedalbord efter att jag har använt en skärbräda i många år. Valet föll på just detta pedalbord eftersom det kändes passande för mina behov. kvalitén på både väskan och själva pedalbordet är mycket bra. Det följa med en del tillbehör som gör det enkelt att sätta ihop allting fint på ganska kort tid. Även lite längre extraskruvar följer med för att kunna justera höjden så att även lite tjockare strömförsörjningsenheter får plats.
Rekommenderas!
Rekommenderas!
1
0
Report
A
Fantastic beginner board for 5 large or 7 smaller pedals
I got this as the basis for my beginner board, along with the Hb powerplant unit, its easy to put together and robust, nice and big even though it says its smaller. Easily holding 4 fullsize pedals with the inputs on the sides, using 90* jacks, good sticky surfaces and loads of velcro included. The powerplant is an absolute bargain though, i have it mounted under the board and i use the screw in legs supplied to power 5 pedals from it. Especially if you are considering using mini stomps, it has loads of room for a beginner setup, nice and tidy. One thing i would change, the legs if you are using them, are just bolts with rubber tips on them, i'd have prefered a plastic or coated steel leg, with a rubber base to protect floors and more rigid. but yeah, 6/5 would recommend.
0
0
Report
S
Compact and well built
It's big enough to host my six pedals, including a small wah-wah.
The pedals I'm using don't draw too much current from the power supply so I can use a small, wall-pluggable one.
All the wires are hidden underneath and only the small female plug for the power is visible.
The bag is a must have, if you, like me, are going to take it from home to the rehearsals and back very often.
The Velcro system to hold the pedals in place is not ideal. The Velcro union is stronger than the glue union, so one must be careful when trying to remove a pedal from the board. Most of the times I have ended with the pedal in my hand and its Velcro strip still attached to the board.
But this is something I rarely do.
Conclusion: I've managed to build a compact and easy to transport pedalboard that fulfills all my needs.
The pedals I'm using don't draw too much current from the power supply so I can use a small, wall-pluggable one.
All the wires are hidden underneath and only the small female plug for the power is visible.
The bag is a must have, if you, like me, are going to take it from home to the rehearsals and back very often.
The Velcro system to hold the pedals in place is not ideal. The Velcro union is stronger than the glue union, so one must be careful when trying to remove a pedal from the board. Most of the times I have ended with the pedal in my hand and its Velcro strip still attached to the board.
But this is something I rarely do.
Conclusion: I've managed to build a compact and easy to transport pedalboard that fulfills all my needs.
0
0
Report
SG
Best choise for 4-5 pedals
Very cool pedalboard for the money. 4 pedals fit easily and left place for another. Velcro included very well fixes the pedals. And the power supply is very conveniently placed at the bottom. I was very pleased with the cover - it is made of very durable material, and there are strong inserts in front and behind to protect the pedals.
0
0
Report
a
Good compact board
Solid board. The Harley Benton ISO 2 pro needed to have something placed under the side with the ports however, as the cables were pressing up against the underside of the board. To compensate for this I raised the feet slightly as well. It is also just a bit too narrow for mini wah or volume pedals, I use a Dunlop Volume X Mini DVP4 and it has a cm or 2 overhang. Still rather secure but good to know. I currently have two BOSS stompboxes, a TC Electronic Viscous Vibe, Digitech Polara, a mini NUX footswitch, and Dunlop Volume X mini. (5 standard size and one mini pedal). Lightweight and compact, with a good quality gigbag that offers decent protection.
0
0
Report
G
simple pedalboard / bag - great for beginner / second boards
use this for my backuyp / smaller board .
no problems , quality seems fine.
i got creative with the feet and took the front ones off and added them to the back to make a tilted board and it does exactly what I needed . even managed to get an MXR iso brick underneath - so happy customer
no problems , quality seems fine.
i got creative with the feet and took the front ones off and added them to the back to make a tilted board and it does exactly what I needed . even managed to get an MXR iso brick underneath - so happy customer
1
0
Report
G
Parfait pour la basse
Chouette pedalboard qui accueille bien mes quatre effets pour basse. Les vis et écrous fournis en plus pour surélever les pieds sont bien utiles et appréciables.
Le système de fixation de l'alimentation n'est en revanche pas très adaptés aux alims les plus fines (style HB powerplant iso-5 pro).
Le système de fixation de l'alimentation n'est en revanche pas très adaptés aux alims les plus fines (style HB powerplant iso-5 pro).
0
0
Report