A
Get your microscope out
This is a good looking and sturdy connector, but it's a huge pain to solder to. There are no tabs or cups for the tip & ring connections, they are just concentric rods nested inside each other. I suggest pre-tinning everything and making the connection by reflowing with some extra flux. The ring connection and the housing (sleeve) are so close together that even with a pencil tip on the iron it's way too easy to bridge them together. But if you're feeling confident, go for it. FYI, a pair of SC Onyx 2025 cable does just fit into the strain relief if you lubricate the inside (with silicone grase / talcum powder) and play with it a little bit.
1
0
Report
C
Good enough
It is a good fit for my sony mdr 7506 and really easy to solder. It has lasted for the past year under really heavy use. Only problem is that its large diameter of plug does not let it plug into phones through their protective cases. Good enough for professional use
0
0
Report
H
Durable Stuff
This connector fit nicely and although is a mini jack the room your get to solder the cable is more than enough
0
0
Report
P
good mini jack
I looked for a JAck spare part and everywhere you can find ONLY the same poorly plastic moulded jack (the one you put so you change it again in 2 months) and then this one! I mean is nothing special is just well done in a category renown for poor quality
0
0
Report
A
Perfect
This is a fantastic connector, having used a few cheaper plugs in the past i spent the (very) little extra for this model and i will definitely stick with these ones, great build quality and great sound!
0
0
Report
K
Not for the short sighted
This is a great plug which allows for decent width cables, the only snag is that there is no tail on the sleeve connection and it's quite easy to solder the sleeve and the earth together, maybe thomann should publish a picture of the internals,
However those with a steady hand, good eyes and a narrow tip on their iron will have no problem.
However those with a steady hand, good eyes and a narrow tip on their iron will have no problem.
0
0
Report
z
Zulexx
Don't buy it when u are bad in soldering.
But jack is great.
But jack is great.
0
0
Report
A
Very good quality
This headphone jack is slightly bigger then I expected but it seems pretty solid and almost undestroyable. It seems a kind of weird plugged to my iphone. I would recommend it to anyone who is looking for bigger sized & solid headphone jack.
0
0
Report
A
Great Jack
This mini jack has a perfect build quality for this price.
The Jack hast a tight fit in the socket and you get a good connection.
If you need a good jack for a diy cable, buy this!
The Jack hast a tight fit in the socket and you get a good connection.
If you need a good jack for a diy cable, buy this!
0
0
Report
M
Good quality
Good and sturdy with an adequate cable clamp. Contraty to the cheaper Rean plug's, these stay together better as the thread-on sleeve doesnt move by itself in use.
0
0
Report
