Highwood Guitar Parts HG-10,50 Vintage Saddles

I bought these saddles to replace the ones in my Fender American Strat.

The issue I had is the most common one... when your guitar is very good and allows you to lower the action a lot, you get the saddle screws protruding from the saddle... which causes immediate discomfort when playing with palm mutes.

Another common issue with traditional Fender bent saddles, is that the saddles have no notch for the strings to stay exactly on the same place... after some time, you start getting overtones and strange pinging and vibration sounds on the unwound strings.

Highwood guitars bring you a lot of advantages:
- Saddles have two points where each screw passes through, meaning that the screws can be MUCH shorter than the traditional ones without risking no contact with the saddle.
- Each saddle has a notch that keeps the string in place, so no more overtones or having to lubricate the saddle point of contact
- Saddles seem to be much more sturdy, as well as the screws... this results in a much bigger and more stable contact surface between the saddles and the bridge itself (they don't move around anymore)

One of the best upgrades you can make on a Standard/Pro American Fender (as well as Mexican and even other brands. Just make sure you select the correct spacing for your guitar. (BTW, modern Fenders, both mexican and american, use the 10.50 spacing)

Installed this on my Fender stratocaster custom shop 60, Mexico made. Perfect match. Much better look than original vintage ones. Not to mention no more palm hurt.
But thats not all.
I didn't change strings at the same time because I wanted to see if there is any improvement in sound comparing to original fender ones. THERE IS a change in sound. Subtle one but to me very positive and audible. There are no more piercing high sounds as with originals. It's like there is more definition in tone, clarity. But when I used tremolo this saddles start to shine. I never ever heard sound like this on my strat when I was using tremolo. I hear all strings, every tone, so many harmonics. I was so thrilled. It's hard for me to explain the sound so I will tell you something you all can understand "I was blind now I can see". That sound. :)
If I buy more fender type guitars this saddles will instantly be installed on them.

I've installed them on my MIM 2021 strat. The original ones sounded very nice, but I had some intonation issues. I also had a "dull" E-string sound (bass side) problem, and wanted to try the Highwoods. In the same time I installed fender's locking tuners (must say). I really don't have any intonation problems no more. And the bass e-string is now perfect. As for the sound, if not better, it's perfect. No more complaints at all with my strat. I totally recommend the product, and Thomann's perfect service as well. (Tip: The mim-strat original saddles are on a standard 2018 squier tele (indonesian) and the sound is lovely now. There's also no "dull-string" problems on the tele, don't know why, won't ask)

I found the Highwood Saddles on a Strat forum and they looked so appropriate for my 60's style Squier Stratocaster "Standard" that I purchased immediately. The original parts were square blocks of some alloy and they just strangled all the original tone and resonance.... Having previously owned a 1977, American Made Stratocaster in Black with Maple neck, I knew what it should sound like,... but in it's original build, the Squier just didn't give me anything back,...
The Highwood saddles are designed around the idea of the original "Bent Metal" saddles ... but using 21st century craftmanship.. The difference is HUUUGE!! The original resonance and voicing comes through clear as a bell. These saddles have helped transform an average £330 STRAT into a real tone monster,... Amazing. Thanks Highwood... and Thank you Thomann.