IK Multimedia ToneX One

My main unit is a Quad Cortex and I also have an Ampero as a backup, so I am well familiar with multi-fx modellers and capturing.

I like the general idea of having an amp with a cab/IR or a capture of a pedal in such a small footprint. At first glance it seems, IK Multimedia has it all figured out, so I thought.

Positive:
It's easy to wire up and the pedal even powers via USB-C, which I figured out by lucky accident.
I plugged my guitar into the pedal's input and my Audio Technica ATH50 headphones into the pedal's output and I got a sound immediately.

Negative:
All my criticism is basically about the software.

Installation
In order to get the ToneX Software Editor, you need to install the IK Multimedia Product Manager
In order to get the IK Multimedia Product Manager, you need to create an online account and provide all kinds of annoying details like your birthday, for instance.
In order to get access to the ToneX SE (!) Software inside of the Product Manager, you need to register the pedal. Which has to be done by typing a serial number which is written onto a small sheet of paper inside the package.

Version Contents
You're not getting the full version of ToneX, only the SE version, which has less models and captures. Which is fair I think, because the pedal is around 200 bucks and the ToneX SE alone is 100. For example, I was interested in the Marshall Plexi models, which unfortunately are only part of the full versions.

User Experience (UX)
This has been the worst for me.
If the pedal is connected to your computer via USB-C and the ToneX Software is open, the software will recognize the pedal no problem. However, in order to change settings on the amp on the pedal, for instance, you have to first change the settings in the patch on your computer and then sync that patch to the pedal by dragging and dropping it onto the pedal in the library. Which is annoying in itself, but I couldn't even change settings in the local patch, because when I change knobs on the virtual amp shown on the screen, nothing changed. That's where I gave up.

sounds like very high quality analog device 👍 to my ears.

note : the pedal can really be used as headphone amp (it can drive a Beyerdynamic dt770 80 Ohm) .

In by bass mode my natural guitar tone is respected. 👍

If you are used to install soft emulations like thu overloud you won’t be bothered by the installation process, it’s also quite similar to universal audio’s, there is a “IK manager” software, you have to register, download toneX which is about 1.2Go, create an account, login. Everything worked fine for me on macOS.

Best of both worlds, you can take your software presets onboard the pedal and go everywhere you want to play, with your same sound.

the pedal behaves like a computer audio interface when connected via usb.

using the tonex software you can browse presets, hear demos, play , tweak settings, then decide to put the preset into the pedal, which can contain up to 20 of them.

The tuner mode worked fine.

The compressor is efficient.

There is no hall reverb, only spring, room and plate.

usb or 9v power works fine.

Such a small device for such a huge sound, sensation, responsiveness.

great.

thank you Thomann, great service as usual.

I returned a Mooer Prime S1, which is completely at the opposite in terms of product philosophy , sound, and playing sensation.