Keys

Intellijel Designs Tangrams

Two analogue ADSR envelopes with digital gate
Timing ranges: fast, medium, slow
2x Retrigger inputs

Intellijel Designs Stomp

Effect pedal interface with expression control and LFO
Send and return socket (6.3 mm jack) for integrating guitar effects
Control for level adjustment of send and return

Intellijel Designs SVF 1U

Voltage controlled multimode filter
Two modulation inputs
FM-CV input

Intellijel Designs Sealegs

Stereo Delay with Reverb
Digital stereo delay with 3 selectable algorithms: Tape, Bucket Brigade and Crossfading Digital
Each algorithm with individual sound colouring and reaction to overdrive and modulation

Intellijel Designs Cascadia

2 analog oscillators
Each with controls for coarse and fine tuning
Sync input and 4 waveforms - sine, triangle, sawtooth and square

Intellijel Designs 7U Stealth Case 104 HP

Colour: Stealth Black
Connectors are located on the rear of the case
2x 6.3 mm Jack input

Intellijel Designs Quadrax

4-Channel function and envelope generator
5 Different modes per channel: AD (attack / decay), AHR (attack / hold / decay), cycle, pulse burst and morphing LFO
4 CV inputs that can be used per channel to control attack or decay

Intellijel Designs Quadratt 1U

Four way active attenuator
Suitable for unipolar or bipolar voltages
Each output is normalized to the next output, so submixes can be created

Intellijel Designs 7U Case 104 HP

28 Slots for Eurorack modules
Power supply unit: +12 V / 3000 mA, -12 V / 3000 mA, +5 V / 1500 mA
External dimensions (W x H x D): 312 x 165 x 546 mm

Intellijel Designs Quad VCA

Volume control per VCA
CV Attenuator with two-colour LEDs for monitoring bi-polar CV signals
Curve infinitely adjustable from linear to exponential

Intellijel Designs Rainmaker

96 kHz / 24 Bit (32 bit internal) signal processing
Many parameters can be controlled via external control voltages directly or via ...
128 Presets and 128 user memory slots

Intellijel Designs Tete

Expander for the Tetrapad by Intellijel (available under Article Nr #440071# (not included))
Combo mode: Allows you to use the 4 Tetrapad pads as a fader, bipolar fader, crossfader, LFO, switch, or drum pad
Notes mode: Each pad can be divided into 4, 8, 12 or 16 note values (incl. a selection of different scales and chords)

Intellijel Designs Steppy

4-Track gate and trigger sequencer
1-64 Steps pattern length
Adjustable gate length

Intellijel Designs Metropolix

Two-track multi-stage sequencer
Master sequence with 8 pitch steps and per step adjustable pulse count (1-8) and gate mode (hold, repeat, single, rest)
Tracks 1 and 2 are derivatives of the master sequence and can be modified in many ways

Intellijel Designs Flurry

Multifunctional module for noise, clock and random signals
Internal square wave generator (switchable between clock or random) with rate control, CV input and bipolar attenuator
Analogue sample & hold / track & hold stage

Intellijel Designs Noise Random Tools 1U

Useful tools for Eurorack systems
Clock and random pulse source with adjustable rate
Analogue pink and white noise source

Intellijel Designs Outs

Output module with balanced stereo output (2x 6.3 mm TRS) and headphone output (6.3 mm TRS)
Separate volume controls for line and headphone output
2x 3.5 mm input with signal LED

Intellijel Designs Shifty

Combination of four S & H stages, sequential gate and sequencer controller
Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated
Shift Register Mode: To create chords - each newly received gate input ...

Intellijel Designs Audio I/O (2023)

Compatible with Intellijel Designs Mixup, Outs, Stereo Mixer 1U, XY IO 1U, Headphones 1U, Palette Cases and 7U Cases
2 x 6.3 mm jack balanced line inputs with LED level meter and adjustable input level (+20dB gain)
2 x 6.3 mm jack balanced line outputs with LED level indicator and adjustable output level

Intellijel Designs Mixup

Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control
Input 3 is a two-channel stereo input with a common mute and level control
Input 4 is an additional, non-modifiable stereo input

Intellijel Designs Dixie II+

8-Way octave switch for quick setting of the mood
Switchable between VCO and LFO mode
Frequency range VCO mode: 1 Hz to 24 kHz

Intellijel Designs Steppy 1U

1 - 64 Step pattern length
Adjustable gate length
Clock divider

Intellijel Designs Triplatt

3-Channel mixer, attenuator, attenuvertor, inverter, multiplier, adder and DC voltage source
When the input jack is empty, each channel provides 0 V to +5 V or -5 V to +5 V as the voltage source
Channels A and B can generate 0 V to +10 V or -10 V to +10 V

Intellijel Designs Buff Mult

Output of the first multiple is normalised to the input of the second
Width: 2 HP
Depth: 39 mm

Intellijel Designs Bifold

Dual wavefolder with crossfader
Has 2 channels with "Buchla-style" and "Serge-style" wavefolders, each with CV input and attenuator
Crossfader with CV input and attenuator

The shipping costs are calculated on the checkout page.
The prices shown exclude VAT