i
If you're reading this, you probably need these.
I think all the Jaspers stands already come with these holders, so their function should be no mystery.
My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.
I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.
I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.
I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.
I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
0
0
Report
TP
Simple and effective
These neat little equipment arms bolt on to your existing Jaspers keyboard stand so you can, uh, stand more keyboards. In my case I'm actually using them for a variety of other kit, like some of the heftier old drum machines, an Akai sampler or two, and the like; so I've got four pairs of these spanning one tier of a multi-tier stand. They work very well and the friction grips can be entirely opened, allowing you to attach them to the stand without disassembling it (which is a relief). Not exactly exciting, but very handy, and the build quality is excellent.
1
0
Report
o
Great quality
Mounted on my Jaspers 3R-120B keyboard stand to hold either the VC340 or Arturia Minibrute 2. Ajustable angle and width. No problems so far and I'm generally satisfied with Jaspers products,
0
0
Report
G
Expand your Jaspers keyboard stand
My Jaspers Holder 30B arrived quickly from Thomann. The extra holders are pretty easy to install especially if you've already put together a Jaspers keyboard stand in the past. These things are a great way to expand your Jaspers Keyboard stands. I had a lot of leftover space on my stands and with these holders I was able to add extra mono synths and drum machines to that unused space. The holders also give you good flexibility with the different angles you can tilt your equipment. My only gripe is for what they are I think they are overpriced and if your buying a few the cost adds up to nearly as much as a full Jaspers keyboard stand itself, but its Jaspers not Thomann that price them that high. Overall apart from the cost these holders really do make good use of that precious studio real estate!
1
0
Report
S
Like no other
this is very good and very stable, it holds and tightens perfectly. the only alternative is Gibraltar accessory stand but it very costly and looks very bulky. this is sleek and looks great for a keyboard, any accessory. it can hold an ipad to a 32 kg stage piano. don't be deceived by its size. its very good. only have an L-key to tighten or loosen. I've 9 pairs of this already
1
0
Report
A
Very solid - as usual from Jaspers.
Per usual, this is of excellent quality, solid build, all is as should be. Take some adjustment and tweaking to get them 100% in the same angle, obviously given their free positioning.
0
0
Report
O
Trusted Perfectly
I trust Jaspers Holder 30B to hold my favorite and most valuable synths and monitors. They are perfect.
0
0
Report
JC
Versatile size
This size can hold everything except my biggest synth. In some cases the 22 cm size is preferable, but this size is a good staple.
0
0
Report
A
Great quality and perfect size for small drum machines.
0
0
Report
A
Great for groove boxes
I purchased these to hold various Elektron boxes. They all fit perfectly where I can sit or stand to use them.
1
0
Report
