A
Quiet PSU, with excellent value and great features for the price.
I bought this as I didn't want to shell out for one of the big name power supplies but still wanted something with isolated outputs to run a secondary pedalboard that I have with 8 pedals on it. For the price this is really excellent value. It's chinese made, obviously, but the vast majority of power supplies these days are, and without exception all of the ones in this price range. I've had problems with power supplies from the big name brands that cost me twice this much so that didn't worry me.
This offers great features for the price. It's got 1200ma total output, spread across 5 different isolated outputs. One of the outputs offers 200ma current at a switchable voltage, three others offer separately isolated 9v 200ma lines, and the final fifth section offers 400ma spread over up to 4 outputs. This is basically like a single 400ma daisy chain with four different outputs, so that section could power multiple 9v pedals combined or one power hungry digital unit for example.
Each of the 8 output jacks has a dedicated LED to indicate which outputs are in operation. I've noticed that these LEDs are a little temperamental on the last isolated 400ma 4 port output and sometimes light up and sometimes don't. The manual says this is an "over current protection feature" and that when the LED goes out the draw is more than the output can supply, but that doesn't make sense as the pedals I've plugged in don't come close to the 400ma total on that section. This was the only quirk I could find, and the reason i didn't give this product 5 stars. I'm not sure if it's just the unit I got or it's a general design thing common to the product, but it doesn't seem to effect how the power supply works. The outputs themselves all seem to be supplying power to all my effects fine and there's absolutely no problems with noise or buzz or any strange behaviour from any of my pedals. In fact the unit itself is perfectly quiet. I tested by cranking the master volume on my amp and kicking in all the pedals one by one, and there was no noise at all.
Build quality is good. It feels heavy and solid, just as well built as more expensive voodoo labs and Carl Martin units, steel housing, proper IEC mains input jack, and it's also fairly small, which saves on pedalboard space. It also works on 110v or 220v mains voltage which means you can use it anywhere in the world by just switching a fuse. That's a real bonus at this price.
Overall, some minor quirks aside, this is a very solid power supply that offers great value for what you pay, and sits right in between the cheaper more basic supplies and the big brand options that cost twice the price. Perfect for a medium sized pedalboard with some excellent features that you wouldn't expect for something in this price range.
This offers great features for the price. It's got 1200ma total output, spread across 5 different isolated outputs. One of the outputs offers 200ma current at a switchable voltage, three others offer separately isolated 9v 200ma lines, and the final fifth section offers 400ma spread over up to 4 outputs. This is basically like a single 400ma daisy chain with four different outputs, so that section could power multiple 9v pedals combined or one power hungry digital unit for example.
Each of the 8 output jacks has a dedicated LED to indicate which outputs are in operation. I've noticed that these LEDs are a little temperamental on the last isolated 400ma 4 port output and sometimes light up and sometimes don't. The manual says this is an "over current protection feature" and that when the LED goes out the draw is more than the output can supply, but that doesn't make sense as the pedals I've plugged in don't come close to the 400ma total on that section. This was the only quirk I could find, and the reason i didn't give this product 5 stars. I'm not sure if it's just the unit I got or it's a general design thing common to the product, but it doesn't seem to effect how the power supply works. The outputs themselves all seem to be supplying power to all my effects fine and there's absolutely no problems with noise or buzz or any strange behaviour from any of my pedals. In fact the unit itself is perfectly quiet. I tested by cranking the master volume on my amp and kicking in all the pedals one by one, and there was no noise at all.
Build quality is good. It feels heavy and solid, just as well built as more expensive voodoo labs and Carl Martin units, steel housing, proper IEC mains input jack, and it's also fairly small, which saves on pedalboard space. It also works on 110v or 220v mains voltage which means you can use it anywhere in the world by just switching a fuse. That's a real bonus at this price.
Overall, some minor quirks aside, this is a very solid power supply that offers great value for what you pay, and sits right in between the cheaper more basic supplies and the big brand options that cost twice the price. Perfect for a medium sized pedalboard with some excellent features that you wouldn't expect for something in this price range.
11
0
Report
m
Reliable, versatile
I tested it with voltmeter under load and without it, it gives exactly what it should +-5%. So it is ok. This unit will forgive you for some mistakes lite short circuit its outputs. It is repairable if you are handy with electric stuff.
Comes with lot of useful connectors and polarity changers. Would recommend it.
Cons: Power supply cable of about 1 meter is a little bit short for my taste.
Comes with lot of useful connectors and polarity changers. Would recommend it.
Cons: Power supply cable of about 1 meter is a little bit short for my taste.
0
0
Report
g
Good PSU, but a bit too big
I bought this PSU and also the Pedaltrain Nano+ with the idea to put it ON the pedalboard.
However, as I purchased more pedals, I realized this is not such a good idea, because it took valueble space on the already small pedal board. Since it was too big to fit underneath, I removed it completely and saved it for a different project.
When I used it it worked perfectly and didn't overheat. No noise intruduced to the pedal chain either.
However, as I purchased more pedals, I realized this is not such a good idea, because it took valueble space on the already small pedal board. Since it was too big to fit underneath, I removed it completely and saved it for a different project.
When I used it it worked perfectly and didn't overheat. No noise intruduced to the pedal chain either.
1
0
Report
k
It has 15 volts!
As a bassist, I always struggle to find 15 v power supply to pump my Eden CaliforniWah pedal. All the time I was left with two adapters, which sometimes lead to ground loops and all the other problems. This power supply is perfect - it is not overpriced, it powers everything on my pedalboard and IT HAS 15 VOLTS!!!
2
0
Report
RL
Perfect Little solution.
It really does what it should. I have it for couple of months now and not a fault. Powers the entire pedal board and there is room for more.
Its not noisy, has blue led lights on when powered, fits well underneath the pedal board. Its simple, its compact and it works.
5 stars for me.
Its not noisy, has blue led lights on when powered, fits well underneath the pedal board. Its simple, its compact and it works.
5 stars for me.
2
0
Report
SS
Goede voeding
Goede voeding, geen problemen mee. Wel redelijk groot, dus niet onder de kleinere pedalboards te monteren. Geen gezoem.
0
0
Report
r
Enough power, rock-solid
Delivers more than enough current for all my pedals, rock-solid power supply for a decent price.
Very happy with it
Very happy with it
0
0
Report
S
Hushhh ! No noise !
Power up your pedal board
No noise
dorrable
No noise
dorrable
0
0
Report
TC
Good solid unit that does the job
Does what it says it does. It's quiet, runs cool and runs all my 9v pedals without any problems whatsoever. It would have been really useful to have a 500ma output though, but it is what it is and works well for my pedalboard set up.
1
0
Report
E
Simple and get's the job done
Have been using this for a year now, both at home and live. No issues so far.
1
0
Report
