pro snake Patch Angled Jack 0,15 m
$2.99
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
aa
Do not recommend, not reliable
an aspiring musician friend 01.05.2021
I ordered several of these pro snake patch cables with different lengths. Over time and several uses, lots of them broke. Some of them even after just a few days of use.

Because of this, especially if you have lots of pedal in your pedalboard setup, these would not be reliable. If you want to have your pedalboard transported to a gig and when you unpack it to work perfectly, these are not for you since they are not reliable and therefore not build to last.

In my case, I need lots of patch cables to run all my pedalboard in and out through the switch (14 patch cables). That's why I moved to another type of patch cables, in my case, after some investigation, some EBS PCFs. Never regretted the change.
quality
1
0
Report

Report

k
Good, but...
krisvad 08.12.2020
So let me say firstly - I like these patch cables. They seem very good quality. I have not issues with noise or bad connection, so from a sound perspective they work well.

I do however have issues with the use of the cables. The wire is very stiff, which maes bending in tight spots a bit trick. Furthermore the sleeve of the jacks seem excessively long. I guess this is to protect the soldered connection but it means you have 2 centimetres at each end which are angled to the surface of the pedal. In most places on my board I have managed but there at a few spots where the cables cannot be packed away but arch up from the board. I think I will try an alternative solution next time. They are reasonably priced so try them out if you have space on your board. But for a tight space, I'd look elsewhere.
quality
0
0
Report

Report

A
Pro Snake Patch - Professional Angled Jack Patch Cable.
Anonymous 23.01.2016
Pro Snake Patch - Professional Angled Jack Patch Cable.
I bought a few of these little angled jack patch cables a few years ago with the intention of them only being a temporary solution while I worked up a new pedal board layout.
I had originally intended to replace them with custom cables made to measure but three years later and these little cables are still going strong and I have no intention of upgrading, in fact I keep coming back for more of these as I am putting together yet another pedal board.
I do have another pedal board with custom made to measure patch cables and I honestly can not hear a difference between them.
These cables certainly do not "suck tone" like the cheaper little coloured patch leads with moulded ends that cost around the same.
The cables are just 15cm long with a good quality metal angled jack at each end, the jacks are not moulded so they can be unscrewed to examine the solder joints, all joints are neat and tidy, dispute the low price these are well made quality patch cables".
These little cables are cheap, well made and just about the perfect length for linking effects, what's not to like !!!
quality
2
0
Report

Report

FR
Perfect!
Fotis Romi 21.11.2017
This cable is lightweight and flexible with very good signal clarity. So on the sound aspect, nothing to be disappointed. thomann

To be honest it is not comfortable as I expected due to the thick angled plug but still it is my first choice in my pedalboard. The thickness improves the final quality and durability. I think it competes with way costly cables, I don't hear any difference thomann with other ones.
The overall quality is pretty good, I never had any problem till now.
I suggest to use the one with this lenght to connect something "out of the pedalboard" as a wah or volume pedal, and to use the 0.15m version for standard pedalboard connections.
quality
1
0
Report

Report

A
Typical quality and good price
AngelosKapa 21.01.2022
Rather cheap patch cables aqcuired mostly for testing purposes while creating a small pedalboard. However they seem rather good, probably will keep them for the future.
quality
0
0
Report

Report

EF
Better than the colored ones!
Ey F 05.02.2022
Better than the colored ones for sure!
quality
0
0
Report

Report

M
Works fine
Mayone 31.01.2022
Works fine for me. Good Val for money
quality
0
0
Report

Report

M
Quite Stiff
Mel_T 21.07.2020
I suggest to think about what kind of eqp are you willing to use with this and in which position.

Because of both stiff metal connection points, it is not really flexible to connect mixer and audio interface. The jacks has 90 degree position and mixer has plugs on the top but interface has plug on the side so I cannot place them next to each other. I always have place one of them on top of something else to keep that angle.

Last but not least, I bought two cables and they are not in same length. One is 1-2 cm longer so that also makes connections looks weird.

Functional wise, all is in order. I have no complain but if I realize this before I will prefer to order Jacks without metal parts.
quality
0
0
Report

Report

e
High quality cable
emielk 24.01.2023
I've had it for years, still working. The cable does not introduce any noise to the chain.
quality
0
0
Report

Report

A
Highly recommended !!!
Anonymous 23.02.2015
The "Pro snake Patch Angled Jack 0,15 m" is about the cheapest little patch lead you will find but the cheap price is not an indication of quality, these are a great little patch lead and very high quality.
I run a fairly long pedal chain in my rig, a dozen pedals so I'm using eleven of these patch leads and with all pedal off I don't have any noise, compared to running a guitar straight into my amp I'm not noticing any drop or losses so I have no complaints.
The metal angled jacks offer plenty of cable protection but these patch leads also have a piece of heat-shrink tubing at each end of the cable which covers the solder joints and adds further protection and stability, these are well made and durable patch leads.
They seem to be the perfect length, not too long and not too short, just right, I'm running a mixture of pedals in two rows of six with inputs and outputs in various positions on the back and sides and the 15cm leads are just long enough for every joint.
If your joining two identical pedals with sockets on the side the angled jacks allow you to couple them with just 40mm between pedals so they are a really neat solution.
When I started using pedals I was just using the cheap multi coloured leads with moulded plastic covered jacks that often come free with pedals, as a result my pedal chain crackled and hissed constantly, after that I "upgraded" with Planet Wave patch leads which was a huge mistake, the jacks fell apart and jammed in the sockets, these pro snake patch leads are a much better solution, very quiet and good quality jacks, highly recommended
quality
3
0
Report

Report

pro snake Patch Angled Jack 0,15 m