Go
Gibson guitar owners - Beware!
If you intend this bridge for a Gibson guitar, please beware! The set only comes with screws and bushings in metric sizes. If you want to use this bridge on a Gibson, you need to buy an additional set of locking screws in inches. For around 20 Euros on top of the price of the bridge, this makes for an excessively expensive bridge alternative.
Buyer beware.
Buyer beware.
4
1
Report
T
Good sustain but one of the saddles comes off when intonating
I used this to replace the stoptail on my PRS SE Custom 24. The fit is perfect and there is a noticeable increase in sustain! However, when intonating one the strings, instead of moving the saddle forwards and back, the screw simply unscrewed itself from the bridge while the saddle sat still. This happened both with and without string tension on the saddle. To work around this issue I detensioned the string, turned the screw as much as I thought was necessary then, using the blunt end of some pliers, pushed the screw back into the bridge. The guitar is now intonated and, to be fair, none of the other saddles had any problems and sustain is good all-round.
2
0
Report
G2
Adjustable intonation for every string
I got this to replace the wrap around bridge on a Harley Benton CST-24 , as the G string could not be intonated properly without then putting the B string out of tonation. This unit solves the problem nicely by having adjustable intonaition on every string.
0
0
Report
