Sennheiser MZQ441

95 Customer ratings

4.2 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

58 Reviews

Sennheiser MZQ441
$41
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
A
Robust and low profile design
Anonymous 13.03.2016
The clip supplied with "older" Sennheiser 441 mics was perhaps the only weak point in this otherwise great microphone's design. The clear, perspex-like plastic design was notorious for being brittle, and snapping.

The 441 is a great mic, but not a particularly cheap one. I for one never want to risk rigging a mic in a broken clip, in case it slips out. This is particularly true when rigging the 441 at upward or downward angles on snare, as I often do.

This robust, updated clip is a great improvement on the original. It grips the 441's body tightly and snugly. I have never known a 441 to slip out of this clip, no matter how extreme the angle I have rigged the mic at.

The matt black finish of the clip proves unobtrusive on stage, and looks good on camera. For those storing 441's in their original Sennheiser boxes, this clip can still be stored in the box's foam cut out, meant for the original clip.

This isn't a cheap product, but is worth the money for the peace of mind it brings.

Amusingly, this is the only mic holder on the market I have come across, which will also securely hold the original Micron Radio Mic handheld transmitters. Anyone still using these?!!!
quality
1
0
Report

Report

j
Square clamp
jetam 01.12.2020
Is it worth spending 1/4 of Burundi's GDP per capita on a mic clamp? It's just a normal mic clamp but square instead of round. Still, I haven't found a better alternative yet. Maybe Thomann should make their own cheaper version.
quality
4
0
Report

Report

s
I bought it, just to be Shure ...
sidamosae 26.07.2023
There is no alternative for the fragile original clamp but this one, it's way overpriced in my opinion.

Unfortunately, this one looks like it came out of a 3D printer. Plastic adapter screw, really?

I needed to tighten the little black screw to get "some" friction in order to prevent the clamp from tilting, and it already felt like I was wearing out the molded plastic.

At this price point they could have hired someone to proofread packaging, too ;).
quality
1
0
Report

Report

C
overpriced but does the job, if one is careful with the cheap plastic thread
Chris1328 16.11.2014
This clamp is designed specifically for the md441 dynamic mic. It is a more robust and therefore more practical clamp than the transparent and rather fragile one that came with the mic.

It doesn't have a latch to ensure the mic doesn't fall out, but it grips tightly enough so that it really isn't necessary.

The thread for the mic stand, and the the thread adaptor insert supplied, are both plastic which is a bit crap considering the hefty price for a simple plastic mic clamp. Unfortunately the square profile of the md441 gives one little choice. Well worth replacing the insert with a metal one.

Overpriced but does the job, as long as care is taken not to cross thread the cheap plastic thread.
quality
2
0
Report

Report

D
Essential!
Delta9 30.09.2022
Finally!
The one and only gripe that MD441 users have expressed over the years (the mount) is finally addressed with by Sennheiser with a perfect solution.

A very important upgrade that firmly supports the Sennheiser MD441 in any position you choose to mount in, without any concern as to its stability.

Essential for loving owners of the Sennheiser MD441.
quality
0
0
Report

Report

r
Not the fragile clear plastic one...
roccapl 28.11.2020
I bought a NOS Sennheiser 441 used from the 80's and it came with a very fragile clear plastic clamp. I bought this as a replacement, it fits the microphone really well without being fragile (you don't want your precious microphone to hit the ground, don't you?)
quality
0
0
Report

Report

J
Perfect replacement for my old ones
John3936 23.06.2015
As most owners of the older MD441s will know the little brittle plastic clips allways snap off and the mic then slips out of the holder which is frustrating. This newer design does away with all that and has given my old 441s a new lease of life.
quality
0
0
Report

Report

VN
Works as it should
Victor Nieva 04.06.2019
There's not much to say about this. Sennheiser claim for a Sennheiser mic. You put your 441 and it'll fit perfect as you might expect
quality
0
0
Report

Report

A
Perfect for my vintage md441
Anonymous 17.12.2014
This is so much better than the original clip from the seventies.

The perfect replacement for this microphone. It is a bit costly but if you treat it well it will be the only one that you will buy.
quality
0
0
Report

Report

B
You need this for your 441
BernieW 08.09.2022
This is a big improvement over the older design that always broke. But you must use it correctly or the expensive mic can slip out.
quality
0
0
Report

Report

Sennheiser MZQ441