A
Not as visualised
This product is of good quality, Thomann Mix Case 5362E was purchased as a bundle with the Behringer Xenyx X2222 USB. The online picture is deceiving in its perspective the case is massive.
That said the top wont shut without pressing the desk well into the foam lid - a concern on this desk as it has a press knob to select the effects settings, whether the constant pressure whilst in the case on this particular knob would eventually cause a failure may be a possibility.
I have purchased quite a selection of equipment from Thomann and on the whole all have been of great value and quality, this product is also in that framework it is just too large.
I will be returning the product - it is almost twice the depth of the mixing desk.
If you wanted to store microphones and leads in the bottom then thats fine. I have other cases for that purpose. A photograph showing the mixing desk in situ would have avoided any confusion.
That said the top wont shut without pressing the desk well into the foam lid - a concern on this desk as it has a press knob to select the effects settings, whether the constant pressure whilst in the case on this particular knob would eventually cause a failure may be a possibility.
I have purchased quite a selection of equipment from Thomann and on the whole all have been of great value and quality, this product is also in that framework it is just too large.
I will be returning the product - it is almost twice the depth of the mixing desk.
If you wanted to store microphones and leads in the bottom then thats fine. I have other cases for that purpose. A photograph showing the mixing desk in situ would have avoided any confusion.
2
0
Report
L
Pretty good.
Not a bad budget case for protection though I ordered this with a Xenyx X222 Behringer desk thinking it would fit like a dream and I found the case much larger than needed for the size of the desk and the padding seemed to be glued in at the factory and not very neatly. The foam was installed so that the desk is positioned near the top (by the carry handle) which makes it top heavy when standing up. This means it wobbles when placed quickly by band mates and falls over when placed on a slight incline/gradient such as a hill or angled pavement.
1
0
Report
K
Looks the business
Nice build quality. Comfortable handle. Knobs are firmly held in place with the internal cushioning of the lid.
Needs to say that the case is oversized with storage along with photos to demonstrate this. We wanted something a bit more compact as we already have somewhere to store cables. I'm sure we will use the extra space though.
Needs to say that the case is oversized with storage along with photos to demonstrate this. We wanted something a bit more compact as we already have somewhere to store cables. I'm sure we will use the extra space though.
2
0
Report
F
It's the second time I buy this case, since the first one was damaged. 61 Euros is very expensive for this case, since it does not offer any kind of protection, it's just a case to carry around your mixer easily, but you have to be carefull not to damage the case while going to a gig. It can't handle a large weight on top of it, so be extra carefull with that. But it is the cheapest hardcase I could find for my mixer (Behringer X2222), and I didn't want to spend more money for a thon nor less for a soft bag. On the pro side is the little compartment for your cables and adapters.
0
0
Report
A
Light, Robust, Protective
I purchased this as a package to protect my Behringer Xenyx X2222 USB, mixer fits nice and snug and there is even a bit of space to store power leads and patch leads. This has not let us down and I feel comfortable putting it in the van with the rest if the gear in the knowledge that it will arrive at the gig all in 1 piece.
My only criticism of this case is.......its made backwards!? When you put the mixer in and stand it on end it is top heavy, it would in my opinion be much better if the mixer was seated closed to the back and not the front, it would just make the whole thing more stable.
Irrespective of that, it does protect and that's its job!
My only criticism of this case is.......its made backwards!? When you put the mixer in and stand it on end it is top heavy, it would in my opinion be much better if the mixer was seated closed to the back and not the front, it would just make the whole thing more stable.
Irrespective of that, it does protect and that's its job!
0
0
Report
A
Seems ok for now
The desk fits neatly inside and is well protected.
The build quality seems ok, but the hinges do seem a little weak. The lid holds open at an angle so be careful not to push this back as I nearly did or it will easily break.
The corners aren't the flight case level chunky metal quality - they are small rounded plastic edges which feel like they may crack with a little bash but so far so good (from a couple of gigs).
But none the less if you look after it & are aware of how it opens it should do the job well.
The mixer fits nicely inside and there are additional spaces for say power leads / other bits you want to put in there too.
The build quality seems ok, but the hinges do seem a little weak. The lid holds open at an angle so be careful not to push this back as I nearly did or it will easily break.
The corners aren't the flight case level chunky metal quality - they are small rounded plastic edges which feel like they may crack with a little bash but so far so good (from a couple of gigs).
But none the less if you look after it & are aware of how it opens it should do the job well.
The mixer fits nicely inside and there are additional spaces for say power leads / other bits you want to put in there too.
0
0
Report
J
Great Case
This case works perfectly for transporting my behringer xenyx 2222fx desk. There's enough space also to fit 2-3 xlr cables and kettle leads, which is very handy as yu have everything you need in the one place for your gig.
The case is fairly sold and flexible, has picked up a few minor scratches which is to be expected, but it has rotected my desk and cannles sufficiently and the joints and handle are solid.
This case will last you for a long time if you mind your equipment.
The case is fairly sold and flexible, has picked up a few minor scratches which is to be expected, but it has rotected my desk and cannles sufficiently and the joints and handle are solid.
This case will last you for a long time if you mind your equipment.
0
0
Report
RM
Perfect for the job.
Keeps my Behringer X2222usb protected. Good product.
0
0
Report
FT
Amazing and fine product
A thomann product with high quality and good price
0
0
Report
M
Very sturdy but lightweight
Great build quality despite it being quite lightweight. It is very sturdy and hard so you know it will protect your mixing desk. I have been using this for a few years with my Behringer Xenyx X2222USB and neither has had a scratch despite a few bumps. I would highly recommend for anyone gigging with a mixing desk.
0
0
Report
