BF
I am changing the review I originally posted.
We had to return the speaker cause there were some minor cosmetic defects on the outside of the cabinet, and that went very well, the people at Thomann are absolutely the best I have personally ever encountered at helping with this.
Also, initially we thought the "left" speaker had an "audible click" and "pop" sound (we even made a video of it during the return request)
well ...it turns out the RME audio interface (which is what is installed in the PC) has a setting to increase the output level by +4 +13 +19 and +24 db in the RME Hammerfall DSP settings....
...well ...it turns out that when the setting is set on anything above +4 ...somehow the system was able to pick up an "audible click" sound interference after bass samples were played back, no idea why, but for anyone out there with with an RME if you notice that "pop" sound coming out of the speaker (left OR right speaker) ..the problem is not the speakers but the setting inside the DSP settings.
The Adam Audio A8H studio monitors are the best I myself as an engineer have ever worked with, there is less of a need to run out to the car to check the mix, the difference in clarity and translation to other systems was very obvious (upgraded from Yamaha HS8 speakers) ...the guys at Thomann give amazing service and respond very quickly. Thomann has a customer for life, we're hooked now.
Also, initially we thought the "left" speaker had an "audible click" and "pop" sound (we even made a video of it during the return request)
well ...it turns out the RME audio interface (which is what is installed in the PC) has a setting to increase the output level by +4 +13 +19 and +24 db in the RME Hammerfall DSP settings....
...well ...it turns out that when the setting is set on anything above +4 ...somehow the system was able to pick up an "audible click" sound interference after bass samples were played back, no idea why, but for anyone out there with with an RME if you notice that "pop" sound coming out of the speaker (left OR right speaker) ..the problem is not the speakers but the setting inside the DSP settings.
The Adam Audio A8H studio monitors are the best I myself as an engineer have ever worked with, there is less of a need to run out to the car to check the mix, the difference in clarity and translation to other systems was very obvious (upgraded from Yamaha HS8 speakers) ...the guys at Thomann give amazing service and respond very quickly. Thomann has a customer for life, we're hooked now.
4
0
Report
OP
Very good monitors
These speakers are absolutly best in my room 4x5m very well treated. I tested Eve 208, 4070 (these are fantastic , probably best monitor, but its for large rooms), Neumann 310 (I had 300D 15 years ago and they are still same). ADAM A8H wins, they are absolutlely precis, clean open midrange, highs are little sharper than Eve but clean, low end detailed. Generaly this speakers are very fasr, they have fast bass response. I think ADAM did very good job here: I found monitors what are suitable for my room and have very good detailed sound .
4
0
Report
