M
Great bridge
Recently added this as a mod to my Mexican Telecaster '72 to replace the factory issue bridge.
Summary - if you currently have a Fender 3 saddle bridge, this is the best money you can spend to improve the feel and tone of your guitar.
Build and finish - well made, solid construction, all parts accurately machined and polished. Good quality fixings and springs.
Assembly - Not 'just slap it on' bridge as you need to remove the saddles to expose the mounting screw holes when fixing to the body. Can be done in about 20 minutes without the need for specialist tools. The ability to adjust intonation and height of individual strings is the main sell here and it does this perfectly,
Playability and sound - Noticeable difference in sustain right away. Notes hold well across the range and with more more punch and 'spank'. Saddles feel like a hot new world under the hand - like going from a bed of nails to absolute luxury. Ergonomic, comfortable and look good, too.
Couple of helpful things to know about:
- There are tiny plastic/silicon washers that sit between the spring and the inside of the bridge plate, some come free easily and other stick to either the spring of the plate and can be easy to miss/lose.
- Pickups with square bobbins (hotrails, etc) will not fit in this bridge without widening the pickup slot with a dremmel. Standard single coils will fit perfectly with no issues.
Summary - if you currently have a Fender 3 saddle bridge, this is the best money you can spend to improve the feel and tone of your guitar.
Build and finish - well made, solid construction, all parts accurately machined and polished. Good quality fixings and springs.
Assembly - Not 'just slap it on' bridge as you need to remove the saddles to expose the mounting screw holes when fixing to the body. Can be done in about 20 minutes without the need for specialist tools. The ability to adjust intonation and height of individual strings is the main sell here and it does this perfectly,
Playability and sound - Noticeable difference in sustain right away. Notes hold well across the range and with more more punch and 'spank'. Saddles feel like a hot new world under the hand - like going from a bed of nails to absolute luxury. Ergonomic, comfortable and look good, too.
Couple of helpful things to know about:
- There are tiny plastic/silicon washers that sit between the spring and the inside of the bridge plate, some come free easily and other stick to either the spring of the plate and can be easy to miss/lose.
- Pickups with square bobbins (hotrails, etc) will not fit in this bridge without widening the pickup slot with a dremmel. Standard single coils will fit perfectly with no issues.
11
0
Report
S
This should be standard!
What a fantastic piece of gear!
I have a high end Korean made (Samick) Tradition Jimmy Reid Tele. It is truly a fantastic Tele by any standard (and yes I have owned MIM and MIA Teles too). These guys retailed for 1000 USD back in 2003 when I bought it new. It is a string-trough body with a modern bridge that has a thick plate (like the Babicz Bridge). The saddles ( modern Strat style saddles) were the problem. When I set the action to my preference (low and jangly) the studs poked through. Then I saw this here on Thomann and decided to try.
COMFORT and FUNCTIONALITY: There are no cons, only pros! Setting intonation and action is very easy.
The saddles are sturdy, smooth and well machined. Perfect for resting the hands on when palm muting.
TONE: This improves tone. If you have a good and resonant your Tele is unplugged, the more difference in clarity and sustain you are going to hear after installing this. If you have some dull brick of a guitar you might not get much benefit in the tone department.
NOTE ON INSTALLATION: In my case there was no need to install the plate, I just installed the Babicz saddles, the plate on my guitar is the same kind of metal and thickness as the Babicz. And to change the plate I would have had to drill three holes. That would not have been very easy, but there was no need to in this case. And to honest I prefer using the old plate instead of the one from Babicz because they have a logo. I don't like that sort of thing, so if I were pressed to name a "con" than that would be it.
CONCLUSION: I recommend this for any Telecaster. The better the tele, the more reason to do it.
I have a high end Korean made (Samick) Tradition Jimmy Reid Tele. It is truly a fantastic Tele by any standard (and yes I have owned MIM and MIA Teles too). These guys retailed for 1000 USD back in 2003 when I bought it new. It is a string-trough body with a modern bridge that has a thick plate (like the Babicz Bridge). The saddles ( modern Strat style saddles) were the problem. When I set the action to my preference (low and jangly) the studs poked through. Then I saw this here on Thomann and decided to try.
COMFORT and FUNCTIONALITY: There are no cons, only pros! Setting intonation and action is very easy.
The saddles are sturdy, smooth and well machined. Perfect for resting the hands on when palm muting.
TONE: This improves tone. If you have a good and resonant your Tele is unplugged, the more difference in clarity and sustain you are going to hear after installing this. If you have some dull brick of a guitar you might not get much benefit in the tone department.
NOTE ON INSTALLATION: In my case there was no need to install the plate, I just installed the Babicz saddles, the plate on my guitar is the same kind of metal and thickness as the Babicz. And to change the plate I would have had to drill three holes. That would not have been very easy, but there was no need to in this case. And to honest I prefer using the old plate instead of the one from Babicz because they have a logo. I don't like that sort of thing, so if I were pressed to name a "con" than that would be it.
CONCLUSION: I recommend this for any Telecaster. The better the tele, the more reason to do it.
1
0
Report
SC
Tele Up-grade
I'm very pleased with this product.
I purchased a Harley Benton Tele style guitar - felt I needed to add single coils to my collection. But I have always felt the "ashtray" bridge and brass saddles a bit crude. So looking for a slicker solution, mainly for cosmetic reasons, I found this bridge to order with the guitar.
Nicely made and finished. The cam system for adjusting string height is ingenious and works well and gives a very smart and uncluttered appearance. Fitting was straightforward, though I had to drill out the three pick up mount holes slightly. Maybe the H.B. uses slightly larger screws than a real Fender ? But this was straightforward and didn't spoil the chrome finish which was a concern.
As for tone, my ear is not good enough to tell any difference. Short of recording before and after under Lab conditions, I couldn't tell. The guitar sounded great before and and certainly does after (because you are going to put fresh strings on and in my case a change of brand and gauge ? ). But ergonomically, aesthetically and functionally speaking, I couldn't be happier.
I purchased a Harley Benton Tele style guitar - felt I needed to add single coils to my collection. But I have always felt the "ashtray" bridge and brass saddles a bit crude. So looking for a slicker solution, mainly for cosmetic reasons, I found this bridge to order with the guitar.
Nicely made and finished. The cam system for adjusting string height is ingenious and works well and gives a very smart and uncluttered appearance. Fitting was straightforward, though I had to drill out the three pick up mount holes slightly. Maybe the H.B. uses slightly larger screws than a real Fender ? But this was straightforward and didn't spoil the chrome finish which was a concern.
As for tone, my ear is not good enough to tell any difference. Short of recording before and after under Lab conditions, I couldn't tell. The guitar sounded great before and and certainly does after (because you are going to put fresh strings on and in my case a change of brand and gauge ? ). But ergonomically, aesthetically and functionally speaking, I couldn't be happier.
5
0
Report
c
Excellent for string-through body teles
Build quality is excellent and the mechanisms seem very solid. However, this would not fit an American Pro tele without drilling new mounting holes... I think it would be a big upgrade for MIM teles and Harley Benton guitars without severe modification. Also, maybe this is an obvious point, but it only works for string-through body guitars!
0
0
Report
J
Has greatly improved the guitar's tone
I fitted this to my '62 reissue Tele and it has brought it back to life, more sustain and body in the sound, and even unplugged the instrument just feels better, and there are no protruding grub screws to stick in your hand when damping the strings.
0
0
Report
A
Superb build quality
Very well made and great looking tele bridge. The full contact system really does make a difference too. The adjustment system is a little fiddly and unintuitive, however it works very well once figured out. Very well priced also.
1
0
Report
CB
This bridge really transformed my telecaster from a mediocre to a top class guitar. Fitting it was a little challenging, but all worth it in the end.
0
0
Report
j
nice item
hello everyone bought this for my telecaster harley benton. and i will tell you. susteyn became straight okschen decent. everything is collected perfectly. but there is one thing. the length of the bolts is not enough to adjust the scale on the Harley Benton TE-52 NA Vintage Series. The appeal to appeal to the guitar master so that he deepened the neck into the case. Well, back to the bridge itself. Looks cool. Handles no sound. generally not
0
0
Report
P
fantastic bridge
fantastic bridge upgrade on my squier tele vibe
0
0
Report
M
Great quality bridge
Got this as a replacement for the stock bridge on my Mexican Tele and it's excellent. Really solid, very little setting up needed, adds an extra bit of sustain, nice addition if modding a lower end guitar.
0
0
Report