Blackmagic Design MultiView 16
Blackmagic Design MultiView 16; Allows monitoring of up to 16 SDI video sources with an Ultra HD monitor or television (monitor / television not included); this gives twice the resolution per viewport; Monitoring of SD, HD or Ultra HD SDI sources, any combination and in any order; full frame resynchronization on each input; Connections:; SDI video inputs: 16x 10 bit SD-SDI, HD-SDI and 6G-SDI; SDI video outputs: 16x 10 bit SD-SDI, HD-SDI and 6G-SDI; SDI rates: 270 Mbit / 1.5 G / 3 G / 6 G; SDI video outputs for multiple display: 2x 10-bit HD-SDI, 2x 10-bit 6G-SDI; HDMI video outputs for multiple display: 1x HDMI type A socket (output supports the EDID data of the monitor); SDI retiming: All SDI outputs automatically switch between standard definition, high definition or 6G-SDI video; Reference input: Black Burst and Tri Sync for SD, HD and 4K; Multi-rate support: Automatic detection of SD, HD or 6G-SDI. Simultaneous viewing of 4K, HD and SD video; Updates: USB 2.0 high-speed interface (480 Mbit / s) or via Ethernet; Configuration: Via front panel LCD or via RJ45 Ethernet or USB 2.0 for firmware updates and setting the IP address; Control: 16 buttons for local control of the MultiView 16, five buttons and a scroll wheel to control the LCD display or RJ45 Ethernet; Compatible with the operating systems: Mac 10.11 El Capitan, Mac 10.12 Sierra or higher, Windows 8.1 and 10; Input voltage: 90 - 240 V AC (IEC power cable not included!); Power consumption: 45 W; Dimensions (WxHxD): 482 x 44 (1U) x 153 mm; Weight: 2.3 kg
We're looking forward to hearing from you and aim to solve any problems as soon as we can.