MV
Smooth switching with lots of permutations
Whether you need to set up Tosin Abasi's Fishman Fluence signature set and switching configuration or just want to serial-parallel switch a set of Seymour Duncans with coil split, this is the switch you need.
With four rails and five switch positions you can set up your signal chain any way you want to. The connectors are on a PCB and there are 24 of them. One for the zero and five for the positions over 4 rails. Also the action is very smooth but precise enough to get the right pick up configuration on the fly. Combine it with push pull switches to expand even more on the permutations. Like phase invertion or adding tone capacitors. True, the setup can be a bit of a puzzle with all those connectors but the quality and versatility makes it worth the effort. A little remark on the finishing, I feel taht the plastic knob could have been made a little better, I had to use a little drop of glue to make it stick.
I used this combined with two push pull switches to get 15 possible voices out of my Tosin sig Fishmans in my Ibanez RGA8 and set up my Seymour Duncans with coil split and parallel serial with just one push pull in my RG7420. Enjoy!
With four rails and five switch positions you can set up your signal chain any way you want to. The connectors are on a PCB and there are 24 of them. One for the zero and five for the positions over 4 rails. Also the action is very smooth but precise enough to get the right pick up configuration on the fly. Combine it with push pull switches to expand even more on the permutations. Like phase invertion or adding tone capacitors. True, the setup can be a bit of a puzzle with all those connectors but the quality and versatility makes it worth the effort. A little remark on the finishing, I feel taht the plastic knob could have been made a little better, I had to use a little drop of glue to make it stick.
I used this combined with two push pull switches to get 15 possible voices out of my Tosin sig Fishmans in my Ibanez RGA8 and set up my Seymour Duncans with coil split and parallel serial with just one push pull in my RG7420. Enjoy!
2
0
Report
M
So many options …
This switch is probably one of the best switches of its kind that you will ever need to buy. With so many wiring options you will be hard put to exhaust the configurations available to you. Yes, if you are inexperienced at wiring pickups it may be a little daunting but the sheer quality of this item is enough to make up for and kind of steep learning curve and the price tag. If your configuration needs are not so complex I would suggest looking at the “S” version which is suitable for strat or Jem type setups. If you want to make the most of your Fishman Tosin Abasi set, for example, you could do infinitely worse than giving these a look.
0
0
Report
O
Great switch (if not the best one)!
This is probably the best switch I ever used.
Functionality
The same as super switches (Fender, or DiMarzio). This switch allows you to do virtually any combination of pickups wiring on your guitar (with HH, HS, HSH, HSS, SSS pickups).
Operation
The smoothest switching of all switches I ever used (including Fender, Oak Grigsby, DiMarzio and Switchcraft). Absolutely quiet and precise. I am now seriously considering to replace all switches on my guitars with that model.
Remarks
Schaller says Model M is mostly for HH, Model E is HSS and so on. Not really. I am using Model M on HSH and HSS.
To those who say "no instruction", or "no schematics", or "crippled instruction", or "I have X years of experience, but cannot use this switch" - if you cannot understand (ABCDE)F, (GHIJK)L, (MNOPQ)R, (STUVW)X, then this switch is not for you. But then again - Fender or DiMarzio, or Oak Grigsby are also not for you. They all operate using exactly same logic.
In that case, simply take your guitar to a luthier ;-)
If you want 5 way, quality build, extremely smoothly, precisely and quietly(!) operating switch - Megaswitch Version M is definitely for you.
Functionality
The same as super switches (Fender, or DiMarzio). This switch allows you to do virtually any combination of pickups wiring on your guitar (with HH, HS, HSH, HSS, SSS pickups).
Operation
The smoothest switching of all switches I ever used (including Fender, Oak Grigsby, DiMarzio and Switchcraft). Absolutely quiet and precise. I am now seriously considering to replace all switches on my guitars with that model.
Remarks
Schaller says Model M is mostly for HH, Model E is HSS and so on. Not really. I am using Model M on HSH and HSS.
To those who say "no instruction", or "no schematics", or "crippled instruction", or "I have X years of experience, but cannot use this switch" - if you cannot understand (ABCDE)F, (GHIJK)L, (MNOPQ)R, (STUVW)X, then this switch is not for you. But then again - Fender or DiMarzio, or Oak Grigsby are also not for you. They all operate using exactly same logic.
In that case, simply take your guitar to a luthier ;-)
If you want 5 way, quality build, extremely smoothly, precisely and quietly(!) operating switch - Megaswitch Version M is definitely for you.
4
2
Report
MF
Schaller makes very reliable hardware and electronics.
Very good switch. Built like a tank. It makes its job and it does pretty well.
0
0
Report
i
High quality, german made, 5p switch, tons of wiring options, bigger than expected, screw holes aligned perfectly, despite not being a professional solderer everything went smoothly.
Good feedback clicks
Good feedback clicks
0
0
Report
G
Schaller Megaswitch M
This is the Megaswitch manufactured by Schaller. The build quality is excellent and very compact.
When it arrived I was very happy to see that it was v2 of the toggle switch which has a curved bottom rather than the squared off bottom of the v1 switch that you see in the image. This gives you a little more space to work with. Especially useful if you have a very small cavity to work in.
It fits perfectly in my Ibanez S series guitar and opens up the wiring options available considerably without taking up more space than the original toggle switch.
When it arrived I was very happy to see that it was v2 of the toggle switch which has a curved bottom rather than the squared off bottom of the v1 switch that you see in the image. This gives you a little more space to work with. Especially useful if you have a very small cavity to work in.
It fits perfectly in my Ibanez S series guitar and opens up the wiring options available considerably without taking up more space than the original toggle switch.
4
0
Report
IO
My choice for the switch
After swapping to Schaller Megaswitch on couple of my guitars i realised how much of noice is coming from the switch itself. That is definitely the switch of my choice and i either swapped or will swap all the blade switches on my guitars to one from Schaller
0
0
Report
L
Quality switch
It's a Schaller Megaswitch and will do anything you want it to do to your pickups
0
0
Report
D
Made to work
You can never go wrong with Schaller
0
0
Report
B
The best ?Superswich? for Strat etc
Wonderful quality with good technical diagrams on Schaller site. Excellent value for money.
0
0
Report
