AG
Great replacement
Bought it to replace the pots on an Ibanez RG560.
The potentiometer works as it should, there is no noise when turning it and it was easy to solder. One thing you should consider is that CTS pots are thicker than most stock pots and you will need new knob heads.
The potentiometer works as it should, there is no noise when turning it and it was easy to solder. One thing you should consider is that CTS pots are thicker than most stock pots and you will need new knob heads.
0
0
Report
B
500K pot and capacitor
500K pot suitable as a replacement (especially if it is a like for like replacement, in a fender) or as a component in a new build. It's advisable to use a reputable wiring diagram and to use a good quality solder to avoid any dry joints and to give you the best circuit (therefore sound) quality.
It is also important to note the capacitance of the capacitor to make sure that it follows your diagram.
I have found that these solid shaft pots work best with a grub screw type knob .
Overall the pot has a good build quality (to be expected from fender) and has a very smooth mechanical action. I'm not sure how these handle over time but I'm sure as it is a fender product it will last well.
It is also important to note the capacitance of the capacitor to make sure that it follows your diagram.
I have found that these solid shaft pots work best with a grub screw type knob .
Overall the pot has a good build quality (to be expected from fender) and has a very smooth mechanical action. I'm not sure how these handle over time but I'm sure as it is a fender product it will last well.
0
0
Report
s
Benchmark pots
There's nothing much to say about Fender pots. They work, they last long, they do exactly what's asked from them.
0
0
Report
s
great stuff for a humbucker loaded guitar
0
0
Report
b
Squier mustang classic vibe replacements
Bought 5hem to replace the stock Squier mustang classic vibe 250k pots. Fits ok to the cavity.
0
0
Report
A
Top pots
Accurate and smooth, these went into my Natuur Shui (Tele La Cabronita style) guitar with single T V Jones Powertron split 3ways- parallel,single,series with a treble retaining .001mf cap +parallel resistor on the volume pot and an ex military pio .053mf cap on the tone = perfection!!!
They have 3/8" shaft and thread.
They have 3/8" shaft and thread.
0
0
Report
P
Solid pot
It is a classic pot used in every guitar or bass. I bought two, but I think one of the two pots is faulty but works when cranked all the way.
0
0
Report
S
Tone volume pot
These pots are top quality and would be a great upgrade if you are overhauling your axe or building a new project. It's just not worth buying cheap pots and compromising the sound of your guitar.
0
0
Report
