A
A reliable and robust product
I'm using the Furman M-10x E in my rack stage set up rig, in my hybrid (analog-digital) recording studio rig and in several clubs DJ booths set up. I had this noise in my studio monitors when tracking or sometimes when mixing in a club and never knew where it came from. I introduced it in my set up and the problem was solved immediately.
I used to pack a big box full of power sockets and many other adapters to different live shows and venues before I came upon this product.
Now the Furman M-10x E is installed in my 19'' rack and did solved all that hustle of the cable cluster. It surely looks great in any 19'' rack rig, its robust and just blend perfectly in with other equipment.
The 10x rear connections are great but an additional power on and off switch buttons for each of the ten connections would have been even more helpfull because there's a lot of equipment out there without any on and off switches.
The moment you switch the Furman M-10x E on, you can't controll the powerflow anymore to all switches because all connections are obviously powered. The other point is also that, when the Furman M- 10x E is switched on, you can't plug any equipment or remove it because of the fear that you might burn some of your precious equipment. I am using it on a daily basis professionally for almost two years now and never had any dissapointment. Great product!
I used to pack a big box full of power sockets and many other adapters to different live shows and venues before I came upon this product.
Now the Furman M-10x E is installed in my 19'' rack and did solved all that hustle of the cable cluster. It surely looks great in any 19'' rack rig, its robust and just blend perfectly in with other equipment.
The 10x rear connections are great but an additional power on and off switch buttons for each of the ten connections would have been even more helpfull because there's a lot of equipment out there without any on and off switches.
The moment you switch the Furman M-10x E on, you can't controll the powerflow anymore to all switches because all connections are obviously powered. The other point is also that, when the Furman M- 10x E is switched on, you can't plug any equipment or remove it because of the fear that you might burn some of your precious equipment. I am using it on a daily basis professionally for almost two years now and never had any dissapointment. Great product!
3
2
Report
EM
Seems okay, not sure I've noticed any difference
To be honest, I got this because I needed a 1U rack power distributer with IEC outputs on the back and a power switch on the front and this was only slightly more expensive than a unit that wasn't also a power conditioner. I have my ad/da converter, my mixer, and my monitors plugged into this. I don't really hear any difference in the sound/noise floor, but I hadn't had any particular problems with electrical noise or interference in the first place to be fair. It really did help me tidy up the power cables in my rack though.
2
1
Report
v
Very good for the money
For the price, it's definitely worth getting, especially if you're thinking of getting some outboard gear. The only thing it lacks is a staggered power-on system, so I can't power my speakers with it without getting clicks and pops whenever I power on or off (bad vibes). But for the price I can understand why it's not there. Other than that its super reliable and rugged, gets the job done no problem.
0
0
Report
S
Power conditioner
I got this to prevent any damage to my gear from any overvoltage spikes since it happens quite a lot. SInce i got it (2 weeks now) it didnt happen but i feel safer knowing that my gear is safe in case it does.
TIP for all future owners: Dont forget to buy power adapter cables to connect your gear.
TIP for all future owners: Dont forget to buy power adapter cables to connect your gear.
2
0
Report
D
Just simple easy to use power conditioner
Nice power conditioner, does not generate lots of heat. After i bought it all hum issues with guitar amp had disappeared.
0
0
Report
Ip
value for money
haven't faced any issues up until now.
working perfectly since there was a power break and all my gear is still working :)
working perfectly since there was a power break and all my gear is still working :)
0
0
Report
D
Furman M-10x E
very useful product, neat and tidy in rack unit
0
0
Report
EE
Good value
I have a couple of these as well as Furman's next step up, the PL-8 CE. This one does away with the pull-out lights but I don't really need those, so happy all round. Lots of outlets and good quality.
0
0
Report
n
Reasonably pleased
This unit works very well in my home studio. I have it powering my audio interface, headphone amplifier and 2 sets of studio monitors.
Slight quality issue, in that 2 of the outputs are mis-aligned, and won't accept the NRL power connectors. I don't need them at the moment, and the shipping costs mean it doesn't make sense to return the unit. The other outputs are fine.
I'm assuming this is a quality control issue, and normally, this unit is perfect.
Slight quality issue, in that 2 of the outputs are mis-aligned, and won't accept the NRL power connectors. I don't need them at the moment, and the shipping costs mean it doesn't make sense to return the unit. The other outputs are fine.
I'm assuming this is a quality control issue, and normally, this unit is perfect.
0
1
Report
