Gator Frameworks GFW-GTR-Hanger Black

I bought 4 units of this item. Unfortunately, only after I have installed them on my wall I have noticed one unit was bent. It is a small bent though. But clearly makes the guitar hanged there looks a bit different (angled) in comparison to the other 3 units.

These are great hangers for guitars, basses etc, but the supplied wall plugs are nowhere good enough. I had some similar plugs in metal and tried those first, put some weight on the hanger and the wall and the fixings weren't strong enough.

In the end I used some Fischer DuoPower plasterboard fixings and longer, larger diameter screws and those did the trick

The screw length on the fork is missized. Had to bring the baseplate about 5mm away from the wall and put washers between plate and wall. Otherwise you can not twist the fork all the way in. Included screws are also too small. I used 5x45 screws on concrete wall and had to drill the two mounting holes bigger first. I wouldnt risk hanging my guitars using the included screws and anchors. Apart from all that seems sturdy.

This hanger is not the sturdiest of them all, but at good price and great if you plan on attaching it to a drywall - it comes with soft pads, that soften the impact when hanging and reduce the risk of tearing a hole in the drywall. My electric guitars hang some 8 cm off the wall on them. At first I was worried about the sturdiness of these, but they do the job just fine.