EB
The best yet.
I've tried a lot of the pot options available, from cheap brands to American AllParts, Fender and DiMarzio but there's nothing like these Goldos.
No-name brand pots are basically on-off switches, Fender ones turn way too easily so most of the times they get turned accidentally, DiMarzio ones are extremely stiff so you just can't do volume and tone swells + I had a DiMarzio push-pull on a guitar once and after 2 years of light use, it just fell off when I pulled it (plus the price is ridiculous) and the AllParts ones are just mediocre and a bit overpriced.
I've bought exclusively Goldo Made In Japan pots for the last 4-5 years for my main 3 electrics and they are just perfect. Perfect feel, perfect functionality, perfect durability.
No scratchy pots since 2015!!!
No-name brand pots are basically on-off switches, Fender ones turn way too easily so most of the times they get turned accidentally, DiMarzio ones are extremely stiff so you just can't do volume and tone swells + I had a DiMarzio push-pull on a guitar once and after 2 years of light use, it just fell off when I pulled it (plus the price is ridiculous) and the AllParts ones are just mediocre and a bit overpriced.
I've bought exclusively Goldo Made In Japan pots for the last 4-5 years for my main 3 electrics and they are just perfect. Perfect feel, perfect functionality, perfect durability.
No scratchy pots since 2015!!!
3
0
Report
BI
Very good replacement
One of the volume pots and the tone pot broke on my Stagg jazz-type bass when I decided to make them tighter. To be prudent I changed both volume pots using these Göldo units. Tone and hum didn't change at all but the new knobs are much slicker than the old ones.
Soldering them was easy and the assembly is solid, I only had to add a washer on the underside so the new volume knobs would reach the same height as the tone pot which is another type.
Unlike the worn-out Stagg units that broke when tightening them a little more, these are built tough and can be tightened firmly without breaking. Affordable are satisfying so I can recommend them.
Soldering them was easy and the assembly is solid, I only had to add a washer on the underside so the new volume knobs would reach the same height as the tone pot which is another type.
Unlike the worn-out Stagg units that broke when tightening them a little more, these are built tough and can be tightened firmly without breaking. Affordable are satisfying so I can recommend them.
0
0
Report
L
Fine pots
Good potentiometers, wanted to replace them because my guitar had mini-pots that worked badly.
The main problem was that the holes in the guitar body where potentiometers are inserted were too small, I had to expand them a little with a file.
After this I soldered them, installed, and I think that they slightly changed the sound.
I'm happy that now I can normally change the volume of the guitar, on the previous pots the volume changed only if I roll them to 0. But with these all is fine.
Don't have any complaints, recommend them!
The main problem was that the holes in the guitar body where potentiometers are inserted were too small, I had to expand them a little with a file.
After this I soldered them, installed, and I think that they slightly changed the sound.
I'm happy that now I can normally change the volume of the guitar, on the previous pots the volume changed only if I roll them to 0. But with these all is fine.
Don't have any complaints, recommend them!
0
0
Report
TD
Excellent service
I received this kit in 5 days delivered to the middle east and was exactly as described.
0
0
Report
SS
This is good pot...
After using all kinds of pots from different brands, these are spot on.
They turn exactly the way I like, not too stiff and not too light.
Solidly constructed and they don't make crackling sounds when turning them.
I use them as good replacements and for scratch builds.
They turn exactly the way I like, not too stiff and not too light.
Solidly constructed and they don't make crackling sounds when turning them.
I use them as good replacements and for scratch builds.
0
0
Report
n
I bought these pot to replace a broken one on one of my guitars. Cheap pots can be sometimes noisy. This pot is noise free, reliable, well built, Some pots are to stiff and others turn too easily but this one is the right fit for me. I had no problem with soldering because of good soldering lugs and no interference at all.
0
0
Report
C
Good replacement!
I have been using these pots to replace old and noisy ones, specially in cheaper guitars. They are noise free, reliable and very well built, with good soldering lugs.
2
0
Report
s
Still working after 9 years
Along with other pot (Goldo EL500), this was bought back in 2013 for a DIY guitar project. And like the other Goldo EL500, it is still working perfectly like day 1. No issues, no fall-out. Note that the guitar is used only for room practice and not for show/gig, so the experience might be different for heavy usage.
0
0
Report
Mg
Used as volume control of my Ibanez guitar.
This volume control is very clear and smooth, however not as smooth as the EMG ones bought with active pickups. It does not hiss or crackle while turning the knob and the volume increase or decrease is constant while turning.
0
0
Report
PC
Great pots
very good quality pots , very pleased
0
0
Report