V
Excellent kit!
Excellent shielding kit! Very simple to use, and the different sizes really help in shielding the tricky spots. The glue is conductive and multimeter shows continuity if you overlap it. Comes with wires and solder. Everything i needed to shield my guitar and redo all the connections. I got two kits because i have a Jazzmaster and the cavity is pretty huge, but for a Strat, Tele, or any other guitar with just the pickup and back cavities like Gibson, one kit will be enough. The shielded wire is ok, but the other wire they provide could have been a bit thicker, seems kinda weak but works flawlessly. The only other downside is the instructions are only in german. So they were useless to me. It should at least be also in english, even if they just google translate it, it would be better than nothing. But there's youtube videos everywhere about shielding so you don't really need a piece of paper to tell you how to do it. Still, they might have their own special way of doing it but i'd never know that because of one language instructions. Instructions or not, this is a great product for the price!
1
0
Report
iT
Great Product, it exceeds expectations
i am very satisfied with the Shield Protection and will get this again if i need to
0
0
Report
P
Juste ce qu'il faut!
Utilisé sans problème sur Strat et Tele, il y en a assez et ça marche! Attention tout de même à avoir les doigts légers lorsqu'on manipule, quelqu'un d'un peu bourrin aura vite fait de coller un petit bout de cuivre sur lui même.
0
0
Report
h
Very good quality
I used this to shield a squier telecaster with complete new hardware installation.
The main concern was that the adhesive had to be conductive, if not it would not have the desired effect.
I can say that this cooper shielding screen is very high quality, thick enough not to rip apart and works like a charm. All cavities of the guitar had ground continuity after the complete makeover.
Highly recommended product.
The main concern was that the adhesive had to be conductive, if not it would not have the desired effect.
I can say that this cooper shielding screen is very high quality, thick enough not to rip apart and works like a charm. All cavities of the guitar had ground continuity after the complete makeover.
Highly recommended product.
0
0
Report
g
Great quality kit
The kit is really good I was not expecting this quality out of this package. The thing that impressed me the most is the piece of solder. I am a technician by profession and the solder was really good. it is very easy to solder even for beginners. Does not require a lot of heat so can be soldered with a hobbyist soldering iron and flows really nice.
0
0
Report
d
Great little kit
I used this kit for my first shielding of a strat body and it worked just fine.
I spent it all on one body, but, again, it was my first time.
Highly recommended to everyone, especially beginners.
I spent it all on one body, but, again, it was my first time.
Highly recommended to everyone, especially beginners.
0
0
Report
A
L'ennemi du Hum et buzz pour les micros simples!
Kit complet pour blinder n'importe quelle guitare entièrement.
Comme tout est adhésif, c'est super pratique. Il y a des morceaux de différentes tailles, ce qui facilitent aussi les choses.
Il est vrai que la notice est en allemand mais ce ne sont pas les explications qui manquent sur internet, et ce, dans toutes les langues.
Le kit contient quelques centimètres d'étain pour la soudure et des fils de masse car il faut bien relier les parties entre elles et à la masse d'un des potards.
Bon montage!
Comme tout est adhésif, c'est super pratique. Il y a des morceaux de différentes tailles, ce qui facilitent aussi les choses.
Il est vrai que la notice est en allemand mais ce ne sont pas les explications qui manquent sur internet, et ce, dans toutes les langues.
Le kit contient quelques centimètres d'étain pour la soudure et des fils de masse car il faut bien relier les parties entre elles et à la masse d'un des potards.
Bon montage!
0
1
Report
H
Cheap, easy to work with and enough for 1 bass
Shielded my P-bass model and had more than enough left. Sticks great, easy to cut and handy sizes
0
0
Report
A
Perfect for reducing hum
I used this to insulate the cavity on my strat and it has definitely improved things. This foil is a lot thicker than I was expecting but it is quite easy to use and I made a nice neat job of it. This kit comes with various different sized pieces so it is very handy.
0
0
Report
V
Shielding guitar Fender Stratocaster
Advantages, in comparison with standard screening - at height. Disadvantages, buy 2 sets, I did not have to shield the cavity of the guitar, take it carefully, consider the amount.
0
0
Report