Jt
It's... okay.
Polishes well at first, then gets dirty and feels like it stops working so well. Takes a while to finish. A little pricey for what it is. There's cheaper alternatives.
0
0
Report
m
polishing is not filing or sanding
polishing is not filing or sanding, did not understand all the reviews on the internet well enough...
-fret ends were sticking out, coming loose at the edges of some of my HB guitars. Finally solved with light hammering the edges down, filing with keyholes the edges that were sticking out on the sides. (wet) sandpaper 1000 for the basics
then finally with this rubber polish the fret ends.
That worked well, take you're time for each fret-end. It leaves just eraser dust instead of steelwool misery . So its not a "magic" tool, but nice for final "shine" treatment. like buffing. Maybe a complete set would allow for more "sanding" but that would be very expensive.
Since i play all my guitars, shining the frets itself is not needed.
-fret ends were sticking out, coming loose at the edges of some of my HB guitars. Finally solved with light hammering the edges down, filing with keyholes the edges that were sticking out on the sides. (wet) sandpaper 1000 for the basics
then finally with this rubber polish the fret ends.
That worked well, take you're time for each fret-end. It leaves just eraser dust instead of steelwool misery . So its not a "magic" tool, but nice for final "shine" treatment. like buffing. Maybe a complete set would allow for more "sanding" but that would be very expensive.
Since i play all my guitars, shining the frets itself is not needed.
0
0
Report
A
Does what it says on the tin, but high priced
The price is a little high, but it achieves a high polish on the frets. Made in Japan, so that could be one reason it is so expensive.
0
0
Report
YT
No good for me
I bought these for fret polishing any of my multiple instruments and the y only worked the first use when they were clean. After some uses the rubber gets dirty with grey metal leftover powder and it makes dirty some not so old frets like the ones on a new Ibanez bass. I ended up returning the trusty metal wool that in my opinion yields much better results and you have works and press as hard as with the rubber.
0
0
Report
