P
Thes pish/pull pots in my custom SC-500 II
I asked them if they could swap out the regular tone pots for these in Sally, my SC-500 II FTF. I use them for splitting the humbucker coils in her.
I see that feature in other HB models such as the CST-24 and I really wanted the same split coil capability in this single cut LP-style axe. It's a one of a kind Custom until someone reads this review.
Thomann's Custom Shop had it done in short order and in my hands 3-4 days later as per their routine business. I did have to buy them of course, but it's the best $12 USD I've spent on guitar accessories in years.
Now I can rock any combination of split coil humbucker in the neck and/or bridge pickup. They're worth every cent
I see that feature in other HB models such as the CST-24 and I really wanted the same split coil capability in this single cut LP-style axe. It's a one of a kind Custom until someone reads this review.
Thomann's Custom Shop had it done in short order and in my hands 3-4 days later as per their routine business. I did have to buy them of course, but it's the best $12 USD I've spent on guitar accessories in years.
Now I can rock any combination of split coil humbucker in the neck and/or bridge pickup. They're worth every cent
0
0
Report
A
Great push pull pot
I purchased this to upgrade my 20 year old HSH jackson and I wanted to be able to turn the guitar into SSS with a pull of a Switch. After extensive research I opted for this one as sold by thomann. During its installation, I would have preferred a better earth lug to be able to solder many wires to. I would say that after installation the pot is very smooth in operation. The volume control on my jackson can sometimes get in the way of playing and I did have a concern that this would be even worse with this new pot in the pulled out position; the reality is that this is no more noticeable than before.
0
0
Report
B
Nice!
I use this pot in a prs style guitar with a pair of calibrated Bareknucle Nailbomb Humbuckers. I use the pull option on the switch to coil tap, or split the humbuckers for a single coil sound. Its a really durable solid switch. No noise. Very subtle torque but stable, really nice for volume swells.
0
0
Report
Fa
It works
I wanted to build in a push-pull-poti in my Warwick Rockbass to habe an active-passive-switch. The poti has the same resistor than the volume poti. It works now for 5 years!
0
0
Report
s
good push/pull poti
I've had this in a guitar for several years now, works great, both as pot and switch, reliable in long term use.
I use it in conjunction with a resistor for a partial coil split on a humbucker pickup.
I would not hesitate to purchase it again. Quality product.
I use it in conjunction with a resistor for a partial coil split on a humbucker pickup.
I would not hesitate to purchase it again. Quality product.
0
0
Report