J
Doesn’t stay in tune, loose bridge.
I was excited for this guitar. All over YouTube people seemed to have bragged about what excellent quality this is for the price and how well it plays and sounds. Spectre Audio even said it holds tuning….
Unfortunately this was not my experience. The guitar came completely jacked up. The input was loose and the cable kept falling out. The bridge was completely loose upon removing the strings and the screw holes were completely STRIPPED.
The guitar wouldn’t hold tuning for the life of me. I tightened all the hardware including the tuners and set up the bridge. I put new strings on the guitar, intonated every string perfectly. My friend and I played all day to break in the strings and it still doesn’t hold tuning.
Also, the frets were extremely scratchy and sharp on all the edges. The nut of the guitar is AWFUL. I don’t believe it’s what it claims to be. It seems like a cheap knock off. The low B string gets stuck inside the cutout.
The locking tuners were NOT Grover. They were cheap Harley Benton tuners that have HB on them. the locking tuners weee loose too.
The back of the guitar…There’s a little chip on on the paint in the crevice of the back plate.
The pots, I haven’t tested them but they don’t seem to be 500k for EMGS.
AND! The middle position of the three way switch is out of phase with the two pick-ups.
This guitar was a nightmare to deal with and took hours of setting up and fixing what I could.
This isn’t a Pro series guitar worthy of recording but a DIY series guitar because you’re going to have to invest $100’s of dollars on upgrading hardware and even then, you’ll just hope that it’s enough to fix the tuning stability.
I really wanted to root for the underdog this time and show that it’s worthy, but it’s not. There was absolutely ZERO quality control on this guitar. They just wanted a quick buck.
Unfortunately this was not my experience. The guitar came completely jacked up. The input was loose and the cable kept falling out. The bridge was completely loose upon removing the strings and the screw holes were completely STRIPPED.
The guitar wouldn’t hold tuning for the life of me. I tightened all the hardware including the tuners and set up the bridge. I put new strings on the guitar, intonated every string perfectly. My friend and I played all day to break in the strings and it still doesn’t hold tuning.
Also, the frets were extremely scratchy and sharp on all the edges. The nut of the guitar is AWFUL. I don’t believe it’s what it claims to be. It seems like a cheap knock off. The low B string gets stuck inside the cutout.
The locking tuners were NOT Grover. They were cheap Harley Benton tuners that have HB on them. the locking tuners weee loose too.
The back of the guitar…There’s a little chip on on the paint in the crevice of the back plate.
The pots, I haven’t tested them but they don’t seem to be 500k for EMGS.
AND! The middle position of the three way switch is out of phase with the two pick-ups.
This guitar was a nightmare to deal with and took hours of setting up and fixing what I could.
This isn’t a Pro series guitar worthy of recording but a DIY series guitar because you’re going to have to invest $100’s of dollars on upgrading hardware and even then, you’ll just hope that it’s enough to fix the tuning stability.
I really wanted to root for the underdog this time and show that it’s worthy, but it’s not. There was absolutely ZERO quality control on this guitar. They just wanted a quick buck.
6
7
Report
