h
The worst "guitar" i ever seen.
Fret board:
-each fret is in different height
-nut is uneven glued, in fact glue is everywhere
Body:
-very ugly glued top to the body near neck slot
-too big neck slot
-chopped wood holes in neck slot
I not recommend to anyone buy this "guitar". More details at my youtube channel in few weeks.
-each fret is in different height
-nut is uneven glued, in fact glue is everywhere
Body:
-very ugly glued top to the body near neck slot
-too big neck slot
-chopped wood holes in neck slot
I not recommend to anyone buy this "guitar". More details at my youtube channel in few weeks.
5
10
Report
s
Plastic nut, impossible to sand (for stain), binging easily marked
Very disappoin. Plastic nut, impossible to sand (for stain), binging easily markeded
2
2
Report
J
poor workmanship
i bought this guitar for my son as a project as he had a operation,and was laid up unable to walk for 8 weeks. when the guitar arrived the neck would not match the body of the guitar and i had to spend another £35 to have it matched by a carpenter.i have spent over £1500 with thomman but i doubt i will purchase any more items. i did email them but no reply as yet ( 6 weeks ).
6
5
Report
PK
i actually threw it in the trash.
I have some experience with DIY kits.
The product i received was undescribable.
I am bitterly disappointed.
I dont know if i can't trust thomann, anymore.
The product i received was undescribable.
I am bitterly disappointed.
I dont know if i can't trust thomann, anymore.
4
1
Report
D
Very Disappointed
Very Disappointed with this guitar kit and Thomanns after sales service.
The body is very rough, certainly couldn't be stained. I had to apply numerous coats of primer and filler to get anywhere near a surface to paint on. Unfortunately I did not trial fit the parts first. The neck is a very loose fit about 0.7 mm gap. It also sits very high in the body socket. The nut was misshaped and had to be replaced.
Thomanns reply to all these fault was "The colleagues inform us that this distance is normal, you will probably not find a better fitting neck in one of the sets we have in stock. They say it is better to have that little distance than to have a neck that won't fit".
I would say it is better to have a correct fitting neck than a incorrect fitting neck, No comment at all about the other faults.
So beware according to Thomann they are all the same. I haven't assembled the rest yet so goodness knows what I will find next.
Took ages for the emails to be answered.
Not at all happy.
The body is very rough, certainly couldn't be stained. I had to apply numerous coats of primer and filler to get anywhere near a surface to paint on. Unfortunately I did not trial fit the parts first. The neck is a very loose fit about 0.7 mm gap. It also sits very high in the body socket. The nut was misshaped and had to be replaced.
Thomanns reply to all these fault was "The colleagues inform us that this distance is normal, you will probably not find a better fitting neck in one of the sets we have in stock. They say it is better to have that little distance than to have a neck that won't fit".
I would say it is better to have a correct fitting neck than a incorrect fitting neck, No comment at all about the other faults.
So beware according to Thomann they are all the same. I haven't assembled the rest yet so goodness knows what I will find next.
Took ages for the emails to be answered.
Not at all happy.
4
2
Report